From: Marcelo Schmitt <marcelo.schmitt@analog.com>
To: <beniamin.bia@analog.com>, <paul.cercueil@analog.com>,
<Michael.Hennerich@analog.com>, <lars@metafoo.de>,
<jic23@kernel.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<marcelo.schmitt1@gmail.com>
Cc: <linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 0/7] Add support for AD7091R-2/-4/-8
Date: Thu, 23 Nov 2023 13:29:12 -0300 [thread overview]
Message-ID: <cover.1700751907.git.marcelo.schmitt1@gmail.com> (raw)
From: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
This series adds support for AD7091R-2/-4/-8 ADCs which can do single shot
or sequenced readings. Threshold events are also supported.
Overall, AD7091R-2/-4/-8 are very similar to AD7091R-5 except they use SPI interface.
This has been tested with raspberrypi and eval board on kernel 6.1 from ADI fork.
Link: https://wiki.analog.com/resources/tools-software/linux-drivers/iio-adc/ad7091r8
I ran get_maintainers on driver files but completely forgot to run it on the
yaml doc, my bad.
I made the changes requested so far.
For v2, I also ran dt_binding_check on iio testing branch to check out for any
additional dt-schema issues. None reported.
Didn't see any other warn after running Sparse, Smatch, and Coccicheck.
I get a warn from checkpatch about IIO_DMA_MINALIGN which I don't know how to fix :(
Change log v1 -> v2:
- Added device tree related To/Cc recipients.
- Removed extra print of error code
- $ref: "adc.yaml" -> $ref: adc.yaml
- Fixed defined but not used build warn
- Moved dt documentation of required properties to after patternProperties.
- Removed incorrect return before regmap_update_bits().
Marcelo Schmitt (7):
iio: adc: ad7091r-base: Set alert config and drvdata
MAINTAINERS: Add MAINTAINERS entry for AD7091R
iio: adc: ad7091r: Move defines to header file
iio: adc: ad7091r: Alloc IIO device before generic probe
dt-bindings: iio: Add binding documentation for AD7091R-8
iio: adc: Add support for AD7091R-8
iio: adc: ad7091r-base: Add debugfs reg access
.../bindings/iio/adc/adi,ad7091r8.yaml | 101 +++++++
MAINTAINERS | 12 +
drivers/iio/adc/Kconfig | 16 ++
drivers/iio/adc/Makefile | 4 +-
drivers/iio/adc/ad7091r-base.c | 114 +++++---
drivers/iio/adc/ad7091r-base.h | 64 ++++-
drivers/iio/adc/ad7091r5.c | 55 ++--
drivers/iio/adc/ad7091r8.c | 270 ++++++++++++++++++
8 files changed, 549 insertions(+), 87 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7091r8.yaml
create mode 100644 drivers/iio/adc/ad7091r8.c
--
2.42.0
next reply other threads:[~2023-11-23 16:29 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-23 16:29 Marcelo Schmitt [this message]
2023-11-23 16:40 ` [PATCH v2 1/7] iio: adc: ad7091r-base: Set alert config and drvdata Marcelo Schmitt
2023-11-25 16:13 ` Jonathan Cameron
2023-11-23 16:40 ` [PATCH v2 2/7] MAINTAINERS: Add MAINTAINERS entry for AD7091R Marcelo Schmitt
2023-11-25 16:15 ` Jonathan Cameron
2023-11-23 16:41 ` [PATCH v2 3/7] iio: adc: ad7091r: Move defines to header file Marcelo Schmitt
2023-11-25 16:18 ` Jonathan Cameron
2023-11-23 16:41 ` [PATCH v2 4/7] iio: adc: ad7091r: Alloc IIO device before generic probe Marcelo Schmitt
2023-11-25 16:21 ` Jonathan Cameron
2023-11-23 16:42 ` [PATCH v2 5/7] dt-bindings: iio: Add binding documentation for AD7091R-8 Marcelo Schmitt
2023-11-25 12:21 ` Conor Dooley
2023-11-27 20:53 ` Rob Herring
2023-11-23 16:42 ` [PATCH v2 6/7] iio: adc: Add support " Marcelo Schmitt
2023-11-25 16:41 ` Jonathan Cameron
2023-11-23 16:43 ` [PATCH v2 7/7] iio: adc: ad7091r-base: Add debugfs reg access Marcelo Schmitt
2023-11-25 16:44 ` Jonathan Cameron
2023-11-25 16:08 ` [PATCH v2 0/7] Add support for AD7091R-2/-4/-8 Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1700751907.git.marcelo.schmitt1@gmail.com \
--to=marcelo.schmitt@analog.com \
--cc=Michael.Hennerich@analog.com \
--cc=beniamin.bia@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.schmitt1@gmail.com \
--cc=paul.cercueil@analog.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).