[PATCH v1 0/8] Add Loongson-2k0500 and Loongson-2k2000 clock support

[PATCH v1 0/8] Add Loongson-2k0500 and Loongson-2k2000 clock support

[Binbin Zhou]

Hi all:

As we know, the Loongson-2K family of SoCs (ls2k0500/ls2k1000/ls2k2000)
have a similar clock structure, and I support them to be configured with
different parameters (e.g., register offsets, etc.).

To make it easier to add support for different SoCs, I refactored the
original driver to make the whole driver as understandable as possible.

Briefly, I have divided all clocks into three categories according to
their properties and their parent clocks: Independent PLLs, clocks based
on frequency scales, and clock dividers.

Thanks.

Binbin Zhou (8):
  dt-bindings: clock: add Loongson-2K expand clock index
  clk: clk-loongson2: Refactor driver for adding new platforms
  dt-bindings: clock: loongson2: add Loongson-2K0500 compatible
  clk: clk-loongson2: Add Loongson-2K0500 clock support
  dt-bindings: clock: loongson2: add Loongson-2K2000 compatible
  clk: clk-loongson2: Add Loongson-2K2000 clock support
  LoongArch: dts: Add clock support to Loongson-2K0500
  LoongArch: dts: Add clock support to Loongson-2K2000

 .../bindings/clock/loongson,ls2k-clk.yaml     |   4 +-
 .../boot/dts/loongson-2k0500-ref.dts          |   4 +
 arch/loongarch/boot/dts/loongson-2k0500.dtsi  |  57 +-
 .../boot/dts/loongson-2k2000-ref.dts          |   4 +
 arch/loongarch/boot/dts/loongson-2k2000.dtsi  |  19 +-
 drivers/clk/clk-loongson2.c                   | 549 ++++++++++--------
 include/dt-bindings/clock/loongson,ls2k-clk.h |  58 +-
 7 files changed, 410 insertions(+), 285 deletions(-)

-- 
2.43.0

[PATCH v1 1/8] dt-bindings: clock: add Loongson-2K expand clock index

[Binbin Zhou]

The Loongson-2K2000 has more clock indexs, such as clock gates.
This patch adds these clock indexes.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
---
 include/dt-bindings/clock/loongson,ls2k-clk.h | 58 +++++++++++++------
 1 file changed, 39 insertions(+), 19 deletions(-)

diff --git a/include/dt-bindings/clock/loongson,ls2k-clk.h b/include/dt-bindings/clock/loongson,ls2k-clk.h
index 3bc4dfc193c2..59546c7a1c5e 100644
--- a/include/dt-bindings/clock/loongson,ls2k-clk.h
+++ b/include/dt-bindings/clock/loongson,ls2k-clk.h
@@ -7,24 +7,44 @@
 #ifndef __DT_BINDINGS_CLOCK_LOONGSON2_H
 #define __DT_BINDINGS_CLOCK_LOONGSON2_H
 
-#define LOONGSON2_REF_100M				0
-#define LOONGSON2_NODE_PLL				1
-#define LOONGSON2_DDR_PLL				2
-#define LOONGSON2_DC_PLL				3
-#define LOONGSON2_PIX0_PLL				4
-#define LOONGSON2_PIX1_PLL				5
-#define LOONGSON2_NODE_CLK				6
-#define LOONGSON2_HDA_CLK				7
-#define LOONGSON2_GPU_CLK				8
-#define LOONGSON2_DDR_CLK				9
-#define LOONGSON2_GMAC_CLK				10
-#define LOONGSON2_DC_CLK				11
-#define LOONGSON2_APB_CLK				12
-#define LOONGSON2_USB_CLK				13
-#define LOONGSON2_SATA_CLK				14
-#define LOONGSON2_PIX0_CLK				15
-#define LOONGSON2_PIX1_CLK				16
-#define LOONGSON2_BOOT_CLK				17
-#define LOONGSON2_CLK_END				18
+#define LOONGSON2_REF_100M	0
+#define LOONGSON2_NODE_PLL	1
+#define LOONGSON2_DDR_PLL	2
+#define LOONGSON2_DC_PLL	3
+#define LOONGSON2_PIX0_PLL	4
+#define LOONGSON2_PIX1_PLL	5
+#define LOONGSON2_NODE_CLK	6
+#define LOONGSON2_HDA_CLK	7
+#define LOONGSON2_GPU_CLK	8
+#define LOONGSON2_DDR_CLK	9
+#define LOONGSON2_GMAC_CLK	10
+#define LOONGSON2_DC_CLK	11
+#define LOONGSON2_APB_CLK	12
+#define LOONGSON2_USB_CLK	13
+#define LOONGSON2_SATA_CLK	14
+#define LOONGSON2_PIX0_CLK	15
+#define LOONGSON2_PIX1_CLK	16
+#define LOONGSON2_BOOT_CLK	17
+
+/* Loongson-2K2000 */
+#define LOONGSON2_OUT0_GATE	18
+#define LOONGSON2_GMAC_GATE	19
+#define LOONGSON2_RIO_GATE	20
+#define LOONGSON2_DC_GATE	21
+#define LOONGSON2_GPU_GATE	22
+#define LOONGSON2_DDR_GATE	23
+#define LOONGSON2_HDA_GATE	24
+#define LOONGSON2_NODE_GATE	25
+#define LOONGSON2_EMMC_GATE	26
+#define LOONGSON2_PIX0_GATE	27
+#define LOONGSON2_PIX1_GATE	28
+#define LOONGSON2_OUT0_CLK	29
+#define LOONGSON2_RIO_CLK	30
+#define LOONGSON2_EMMC_CLK	31
+#define LOONGSON2_DES_CLK	32
+#define LOONGSON2_I2S_CLK	33
+#define LOONGSON2_MISC_CLK	34
+
+#define LOONGSON2_CLK_END	35
 
 #endif
-- 
2.43.0

Re: [PATCH v1 1/8] dt-bindings: clock: add Loongson-2K expand clock index

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 268 bytes --]

On Tue, Mar 26, 2024 at 05:01:00PM +0800, Binbin Zhou wrote:

> -#define LOONGSON2_CLK_END				18


> +#define LOONGSON2_CLK_END	35

Please just delete this. If you can change it, it is not a binding.
Just define it in the driver if it is needed there.

Thanks,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v1 1/8] dt-bindings: clock: add Loongson-2K expand clock index

[Binbin Zhou]

On Wed, Mar 27, 2024 at 12:54 AM Conor Dooley <conor@kernel.org> wrote:
>
> On Tue, Mar 26, 2024 at 05:01:00PM +0800, Binbin Zhou wrote:
>
> > -#define LOONGSON2_CLK_END                            18
>
>
> > +#define LOONGSON2_CLK_END    35
>
> Please just delete this. If you can change it, it is not a binding.
> Just define it in the driver if it is needed there.

Hi Conor:

Ok, I will drop it in the next version.

Thanks.
Binbin
>
> Thanks,
> Conor.

Re: [PATCH v1 1/8] dt-bindings: clock: add Loongson-2K expand clock index

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 621 bytes --]

On Wed, Mar 27, 2024 at 07:15:40AM +0600, Binbin Zhou wrote:
> On Wed, Mar 27, 2024 at 12:54 AM Conor Dooley <conor@kernel.org> wrote:
> >
> > On Tue, Mar 26, 2024 at 05:01:00PM +0800, Binbin Zhou wrote:
> >
> > > -#define LOONGSON2_CLK_END                            18
> >
> >
> > > +#define LOONGSON2_CLK_END    35
> >
> > Please just delete this. If you can change it, it is not a binding.
> > Just define it in the driver if it is needed there.
> 
> Hi Conor:
> 
> Ok, I will drop it in the next version.

With that removed
Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH v1 2/8] clk: clk-loongson2: Refactor driver for adding new platforms

[Binbin Zhou]

The driver only supported loongson-2K1000 at first, but the clock
structure of loongson-2K0500 and loongson-2K2000 are actually similar,
and I tried to refactor the whole driver to adjust to the addition of
the new platform.

Briefly, I have divided all clocks into three categories according to
their properties and their parent clocks: Independent PLLs, clocks based
on frequency scales, and clock dividers.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
---
 drivers/clk/clk-loongson2.c | 459 ++++++++++++++++--------------------
 1 file changed, 199 insertions(+), 260 deletions(-)

diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c
index bacdcbb287ac..00e384290314 100644
--- a/drivers/clk/clk-loongson2.c
+++ b/drivers/clk/clk-loongson2.c
@@ -6,6 +6,7 @@
 
 #include <linux/err.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -13,317 +14,254 @@
 #include <linux/io-64-nonatomic-lo-hi.h>
 #include <dt-bindings/clock/loongson,ls2k-clk.h>
 
-#define LOONGSON2_PLL_MULT_SHIFT		32
-#define LOONGSON2_PLL_MULT_WIDTH		10
-#define LOONGSON2_PLL_DIV_SHIFT			26
-#define LOONGSON2_PLL_DIV_WIDTH			6
-#define LOONGSON2_APB_FREQSCALE_SHIFT		20
-#define LOONGSON2_APB_FREQSCALE_WIDTH		3
-#define LOONGSON2_USB_FREQSCALE_SHIFT		16
-#define LOONGSON2_USB_FREQSCALE_WIDTH		3
-#define LOONGSON2_SATA_FREQSCALE_SHIFT		12
-#define LOONGSON2_SATA_FREQSCALE_WIDTH		3
-#define LOONGSON2_BOOT_FREQSCALE_SHIFT		8
-#define LOONGSON2_BOOT_FREQSCALE_WIDTH		3
-
-static void __iomem *loongson2_pll_base;
-
 static const struct clk_parent_data pdata[] = {
-	{ .fw_name = "ref_100m",},
+	{ .fw_name = "ref_100m", },
 };
 
-static struct clk_hw *loongson2_clk_register(struct device *dev,
-					  const char *name,
-					  const char *parent_name,
-					  const struct clk_ops *ops,
-					  unsigned long flags)
-{
-	int ret;
-	struct clk_hw *hw;
-	struct clk_init_data init = { };
-
-	hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
-	if (!hw)
-		return ERR_PTR(-ENOMEM);
-
-	init.name = name;
-	init.ops = ops;
-	init.flags = flags;
-	init.num_parents = 1;
-
-	if (!parent_name)
-		init.parent_data = pdata;
-	else
-		init.parent_names = &parent_name;
-
-	hw->init = &init;
-
-	ret = devm_clk_hw_register(dev, hw);
-	if (ret)
-		hw = ERR_PTR(ret);
-
-	return hw;
-}
-
-static unsigned long loongson2_calc_pll_rate(int offset, unsigned long rate)
-{
-	u64 val;
-	u32 mult, div;
-
-	val = readq(loongson2_pll_base + offset);
-
-	mult = (val >> LOONGSON2_PLL_MULT_SHIFT) &
-			clk_div_mask(LOONGSON2_PLL_MULT_WIDTH);
-	div = (val >> LOONGSON2_PLL_DIV_SHIFT) &
-			clk_div_mask(LOONGSON2_PLL_DIV_WIDTH);
-
-	return div_u64((u64)rate * mult, div);
-}
-
-static unsigned long loongson2_node_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
-{
-	return loongson2_calc_pll_rate(0x0, parent_rate);
-}
-
-static const struct clk_ops loongson2_node_clk_ops = {
-	.recalc_rate = loongson2_node_recalc_rate,
+enum loongson2_clk_type {
+	CLK_TYPE_PLL,
+	CLK_TYPE_SCALE,
+	CLK_TYPE_DIVIDER,
+	CLK_TYPE_NONE,
 };
 
-static unsigned long loongson2_ddr_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
-{
-	return loongson2_calc_pll_rate(0x10, parent_rate);
-}
+struct loongson2_clk_provider {
+	void __iomem *base;
+	struct device *dev;
+	struct clk_hw_onecell_data clk_data;
+	spinlock_t clk_lock;	/* protect access to DIV registers */
+};
 
-static const struct clk_ops loongson2_ddr_clk_ops = {
-	.recalc_rate = loongson2_ddr_recalc_rate,
+struct loongson2_clk_data {
+	struct clk_hw hw;
+	void __iomem *reg;
+	u8 div_shift;
+	u8 div_width;
+	u8 mult_shift;
+	u8 mult_width;
 };
 
-static unsigned long loongson2_dc_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
-{
-	return loongson2_calc_pll_rate(0x20, parent_rate);
-}
+struct loongson2_clk_board_info {
+	u8 id;
+	enum loongson2_clk_type type;
+	const char *name;
+	const char *parent_name;
+	u8 reg_offset;
+	u8 div_shift;
+	u8 div_width;
+	u8 mult_shift;
+	u8 mult_width;
+};
 
-static const struct clk_ops loongson2_dc_clk_ops = {
-	.recalc_rate = loongson2_dc_recalc_rate,
+#define CLK_DIV(_id, _name, _pname, _offset, _dshift, _dwidth)	\
+	{							\
+		.id		= _id,				\
+		.type		= CLK_TYPE_DIVIDER,		\
+		.name		= _name,			\
+		.parent_name	= _pname,			\
+		.reg_offset	= _offset,			\
+		.div_shift	= _dshift,			\
+		.div_width	= _dwidth,			\
+	}
+
+#define CLK_PLL(_id, _name, _offset, _mshift, _mwidth,		\
+		_dshift, _dwidth)				\
+	{							\
+		.id		= _id,				\
+		.type		= CLK_TYPE_PLL,			\
+		.name		= _name,			\
+		.parent_name	= NULL,				\
+		.reg_offset	= _offset,			\
+		.mult_shift	= _mshift,			\
+		.mult_width	= _mwidth,			\
+		.div_shift	= _dshift,			\
+		.div_width	= _dwidth,			\
+	}
+
+#define CLK_SCALE(_id, _name, _pname, _offset,			\
+		  _dshift, _dwidth)				\
+	{							\
+		.id		= _id,				\
+		.type		= CLK_TYPE_SCALE,		\
+		.name		= _name,			\
+		.parent_name	= _pname,			\
+		.reg_offset	= _offset,			\
+		.div_shift	= _dshift,			\
+		.div_width	= _dwidth,			\
+	}
+
+static const struct loongson2_clk_board_info ls2k1000_clks[] = {
+	CLK_PLL(LOONGSON2_NODE_PLL,   "pll_node", 0,    32, 10, 26, 6),
+	CLK_PLL(LOONGSON2_DDR_PLL,    "pll_ddr",  0x10, 32, 10, 26, 6),
+	CLK_PLL(LOONGSON2_DC_PLL,     "pll_dc",   0x20, 32, 10, 26, 6),
+	CLK_PLL(LOONGSON2_PIX0_PLL,   "pll_pix0", 0x30, 32, 10, 26, 6),
+	CLK_PLL(LOONGSON2_PIX1_PLL,   "pll_pix1", 0x40, 32, 10, 26, 6),
+	CLK_DIV(LOONGSON2_NODE_CLK,   "clk_node", "pll_node", 0x8,  0,  6),
+	CLK_DIV(LOONGSON2_DDR_CLK,    "clk_ddr",  "pll_ddr",  0x18, 0,  6),
+	CLK_DIV(LOONGSON2_GPU_CLK,    "clk_gpu",  "pll_ddr",  0x18, 22, 6),
+	/*
+	 * The hda clk divisor in the upper 32bits and the clk-prodiver
+	 * layer code doesn't support 64bit io operation thus a conversion
+	 * is required that subtract shift by 32 and add 4byte to the hda
+	 * address
+	 */
+	CLK_DIV(LOONGSON2_HDA_CLK,    "clk_hda",  "pll_ddr",  0x22, 12, 7),
+	CLK_DIV(LOONGSON2_DC_CLK,     "clk_dc",   "pll_dc",   0x28, 0,  6),
+	CLK_DIV(LOONGSON2_GMAC_CLK,   "clk_gmac", "pll_dc",   0x28, 22, 6),
+	CLK_DIV(LOONGSON2_PIX0_CLK,   "clk_pix0", "pll_pix0", 0x38, 0,  6),
+	CLK_DIV(LOONGSON2_PIX1_CLK,   "clk_pix1", "pll_pix1", 0x38, 0,  6),
+	CLK_SCALE(LOONGSON2_BOOT_CLK, "clk_boot", NULL,       0x50, 8,  3),
+	CLK_SCALE(LOONGSON2_SATA_CLK, "clk_sata", "clk_gmac", 0x50, 12, 3),
+	CLK_SCALE(LOONGSON2_USB_CLK,  "clk_usb",  "clk_gmac", 0x50, 16, 3),
+	CLK_SCALE(LOONGSON2_APB_CLK,  "clk_apb",  "clk_gmac", 0x50, 20, 3),
+	{ /* Sentinel */ },
 };
 
-static unsigned long loongson2_pix0_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
+static inline struct loongson2_clk_data *to_loongson2_clk(struct clk_hw *hw)
 {
-	return loongson2_calc_pll_rate(0x30, parent_rate);
+	return container_of(hw, struct loongson2_clk_data, hw);
 }
 
-static const struct clk_ops loongson2_pix0_clk_ops = {
-	.recalc_rate = loongson2_pix0_recalc_rate,
-};
-
-static unsigned long loongson2_pix1_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
+static inline unsigned long loongson2_rate_part(u64 val, u8 shift, u8 width)
 {
-	return loongson2_calc_pll_rate(0x40, parent_rate);
+	return (val & GENMASK(shift + width - 1, shift)) >> shift;
 }
 
-static const struct clk_ops loongson2_pix1_clk_ops = {
-	.recalc_rate = loongson2_pix1_recalc_rate,
-};
-
-static unsigned long loongson2_calc_rate(unsigned long rate,
-					 int shift, int width)
+static unsigned long loongson2_pll_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
 {
-	u64 val;
-	u32 mult;
-
-	val = readq(loongson2_pll_base + 0x50);
+	u64 val, mult, div;
+	struct loongson2_clk_data *clk = to_loongson2_clk(hw);
 
-	mult = (val >> shift) & clk_div_mask(width);
+	val  = readq(clk->reg);
+	mult = loongson2_rate_part(val, clk->mult_shift, clk->mult_width);
+	div  = loongson2_rate_part(val, clk->div_shift,  clk->div_width);
 
-	return div_u64((u64)rate * (mult + 1), 8);
-}
-
-static unsigned long loongson2_boot_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
-{
-	return loongson2_calc_rate(parent_rate,
-				   LOONGSON2_BOOT_FREQSCALE_SHIFT,
-				   LOONGSON2_BOOT_FREQSCALE_WIDTH);
+	return div_u64((u64)parent_rate * mult, div);
 }
 
-static const struct clk_ops loongson2_boot_clk_ops = {
-	.recalc_rate = loongson2_boot_recalc_rate,
+static const struct clk_ops loongson2_pll_recalc_ops = {
+	.recalc_rate = loongson2_pll_recalc_rate,
 };
 
-static unsigned long loongson2_apb_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
+static unsigned long loongson2_freqscale_recalc_rate(struct clk_hw *hw,
+						     unsigned long parent_rate)
 {
-	return loongson2_calc_rate(parent_rate,
-				   LOONGSON2_APB_FREQSCALE_SHIFT,
-				   LOONGSON2_APB_FREQSCALE_WIDTH);
-}
+	u64 val, mult;
+	struct loongson2_clk_data *clk = to_loongson2_clk(hw);
 
-static const struct clk_ops loongson2_apb_clk_ops = {
-	.recalc_rate = loongson2_apb_recalc_rate,
-};
+	val  = readq(clk->reg);
+	mult = loongson2_rate_part(val, clk->div_shift, clk->div_width) + 1;
 
-static unsigned long loongson2_usb_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
-{
-	return loongson2_calc_rate(parent_rate,
-				   LOONGSON2_USB_FREQSCALE_SHIFT,
-				   LOONGSON2_USB_FREQSCALE_WIDTH);
+	return div_u64((u64)parent_rate * mult, 8);
 }
 
-static const struct clk_ops loongson2_usb_clk_ops = {
-	.recalc_rate = loongson2_usb_recalc_rate,
+static const struct clk_ops loongson2_freqscale_recalc_ops = {
+	.recalc_rate = loongson2_freqscale_recalc_rate,
 };
 
-static unsigned long loongson2_sata_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
+static struct clk_hw *loongson2_clk_register(struct loongson2_clk_provider *clp,
+					     const struct loongson2_clk_board_info *cld,
+					     const struct clk_ops *ops)
 {
-	return loongson2_calc_rate(parent_rate,
-				   LOONGSON2_SATA_FREQSCALE_SHIFT,
-				   LOONGSON2_SATA_FREQSCALE_WIDTH);
-}
+	int ret;
+	struct clk_hw *hw;
+	struct loongson2_clk_data *clk;
+	struct clk_init_data init = { };
 
-static const struct clk_ops loongson2_sata_clk_ops = {
-	.recalc_rate = loongson2_sata_recalc_rate,
-};
+	clk = devm_kzalloc(clp->dev, sizeof(*clk), GFP_KERNEL);
+	if (!clk)
+		return ERR_PTR(-ENOMEM);
 
-static inline int loongson2_check_clk_hws(struct clk_hw *clks[], unsigned int count)
-{
-	unsigned int i;
+	init.name  = cld->name;
+	init.ops   = ops;
+	init.flags = 0;
+	init.num_parents = 1;
 
-	for (i = 0; i < count; i++)
-		if (IS_ERR(clks[i])) {
-			pr_err("Loongson2 clk %u: register failed with %ld\n",
-				i, PTR_ERR(clks[i]));
-			return PTR_ERR(clks[i]);
-		}
+	if (!cld->parent_name)
+		init.parent_data = pdata;
+	else
+		init.parent_names = &cld->parent_name;
+
+	clk->reg	= clp->base + cld->reg_offset;
+	clk->div_shift	= cld->div_shift;
+	clk->div_width	= cld->div_width;
+	clk->mult_shift	= cld->mult_shift;
+	clk->mult_width	= cld->mult_width;
+	clk->hw.init	= &init;
 
-	return 0;
+	hw = &clk->hw;
+	ret = devm_clk_hw_register(clp->dev, hw);
+	if (ret)
+		clk = ERR_PTR(ret);
+
+	return hw;
 }
 
 static int loongson2_clk_probe(struct platform_device *pdev)
 {
-	int ret;
-	struct clk_hw **hws;
-	struct clk_hw_onecell_data *clk_hw_data;
-	spinlock_t loongson2_clk_lock;
+	int i, clks_num = 0;
+	struct clk_hw *hw;
 	struct device *dev = &pdev->dev;
+	struct loongson2_clk_provider *clp;
+	const struct loongson2_clk_board_info *p, *data;
 
-	loongson2_pll_base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(loongson2_pll_base))
-		return PTR_ERR(loongson2_pll_base);
-
-	clk_hw_data = devm_kzalloc(dev, struct_size(clk_hw_data, hws, LOONGSON2_CLK_END),
-					GFP_KERNEL);
-	if (WARN_ON(!clk_hw_data))
-		return -ENOMEM;
-
-	clk_hw_data->num = LOONGSON2_CLK_END;
-	hws = clk_hw_data->hws;
-
-	hws[LOONGSON2_NODE_PLL] = loongson2_clk_register(dev, "node_pll",
-						NULL,
-						&loongson2_node_clk_ops, 0);
-
-	hws[LOONGSON2_DDR_PLL] = loongson2_clk_register(dev, "ddr_pll",
-						NULL,
-						&loongson2_ddr_clk_ops, 0);
+	data = device_get_match_data(dev);
+	if (!data)
+		return -EINVAL;
 
-	hws[LOONGSON2_DC_PLL] = loongson2_clk_register(dev, "dc_pll",
-						NULL,
-						&loongson2_dc_clk_ops, 0);
+	for (p = data; p->name; p++)
+		clks_num++;
 
-	hws[LOONGSON2_PIX0_PLL] = loongson2_clk_register(dev, "pix0_pll",
-						NULL,
-						&loongson2_pix0_clk_ops, 0);
-
-	hws[LOONGSON2_PIX1_PLL] = loongson2_clk_register(dev, "pix1_pll",
-						NULL,
-						&loongson2_pix1_clk_ops, 0);
+	clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num),
+			   GFP_KERNEL);
+	if (!clp)
+		return -ENOMEM;
 
-	hws[LOONGSON2_BOOT_CLK] = loongson2_clk_register(dev, "boot",
-						NULL,
-						&loongson2_boot_clk_ops, 0);
+	clp->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(clp->base))
+		return PTR_ERR(clp->base);
+
+	spin_lock_init(&clp->clk_lock);
+	clp->clk_data.num = clks_num + 1;
+	clp->dev = dev;
+
+	for (i = 0; i < clks_num; i++) {
+		p = &data[i];
+		switch (p->type) {
+		case CLK_TYPE_PLL:
+			hw = loongson2_clk_register(clp, p,
+						    &loongson2_pll_recalc_ops);
+			break;
+		case CLK_TYPE_SCALE:
+			hw = loongson2_clk_register(clp, p,
+						    &loongson2_freqscale_recalc_ops);
+			break;
+		case CLK_TYPE_DIVIDER:
+			hw = devm_clk_hw_register_divider(dev, p->name,
+							  p->parent_name, 0,
+							  clp->base + p->reg_offset,
+							  p->div_shift, p->div_width,
+							  CLK_DIVIDER_ONE_BASED,
+							  &clp->clk_lock);
+			break;
+		default:
+			return dev_err_probe(dev, -EINVAL, "Invalid clk type\n");
+		}
 
-	hws[LOONGSON2_NODE_CLK] = devm_clk_hw_register_divider(dev, "node",
-						"node_pll", 0,
-						loongson2_pll_base + 0x8, 0,
-						6, CLK_DIVIDER_ONE_BASED,
-						&loongson2_clk_lock);
+		if (IS_ERR(hw))
+			return dev_err_probe(dev, PTR_ERR(hw),
+					     "Register clk: %s, type: %u failed!\n",
+					     p->name, p->type);
 
-	/*
-	 * The hda clk divisor in the upper 32bits and the clk-prodiver
-	 * layer code doesn't support 64bit io operation thus a conversion
-	 * is required that subtract shift by 32 and add 4byte to the hda
-	 * address
-	 */
-	hws[LOONGSON2_HDA_CLK] = devm_clk_hw_register_divider(dev, "hda",
-						"ddr_pll", 0,
-						loongson2_pll_base + 0x22, 12,
-						7, CLK_DIVIDER_ONE_BASED,
-						&loongson2_clk_lock);
-
-	hws[LOONGSON2_GPU_CLK] = devm_clk_hw_register_divider(dev, "gpu",
-						"ddr_pll", 0,
-						loongson2_pll_base + 0x18, 22,
-						6, CLK_DIVIDER_ONE_BASED,
-						&loongson2_clk_lock);
-
-	hws[LOONGSON2_DDR_CLK] = devm_clk_hw_register_divider(dev, "ddr",
-						"ddr_pll", 0,
-						loongson2_pll_base + 0x18, 0,
-						6, CLK_DIVIDER_ONE_BASED,
-						&loongson2_clk_lock);
-
-	hws[LOONGSON2_GMAC_CLK] = devm_clk_hw_register_divider(dev, "gmac",
-						"dc_pll", 0,
-						loongson2_pll_base + 0x28, 22,
-						6, CLK_DIVIDER_ONE_BASED,
-						&loongson2_clk_lock);
-
-	hws[LOONGSON2_DC_CLK] = devm_clk_hw_register_divider(dev, "dc",
-						"dc_pll", 0,
-						loongson2_pll_base + 0x28, 0,
-						6, CLK_DIVIDER_ONE_BASED,
-						&loongson2_clk_lock);
-
-	hws[LOONGSON2_APB_CLK] = loongson2_clk_register(dev, "apb",
-						"gmac",
-						&loongson2_apb_clk_ops, 0);
-
-	hws[LOONGSON2_USB_CLK] = loongson2_clk_register(dev, "usb",
-						"gmac",
-						&loongson2_usb_clk_ops, 0);
-
-	hws[LOONGSON2_SATA_CLK] = loongson2_clk_register(dev, "sata",
-						"gmac",
-						&loongson2_sata_clk_ops, 0);
-
-	hws[LOONGSON2_PIX0_CLK] = clk_hw_register_divider(NULL, "pix0",
-						"pix0_pll", 0,
-						loongson2_pll_base + 0x38, 0, 6,
-						CLK_DIVIDER_ONE_BASED,
-						&loongson2_clk_lock);
-
-	hws[LOONGSON2_PIX1_CLK] = clk_hw_register_divider(NULL, "pix1",
-						"pix1_pll", 0,
-						loongson2_pll_base + 0x48, 0, 6,
-						CLK_DIVIDER_ONE_BASED,
-						&loongson2_clk_lock);
-
-	ret = loongson2_check_clk_hws(hws, LOONGSON2_CLK_END);
-	if (ret)
-		return ret;
+		clp->clk_data.hws[p->id] = hw;
+	}
 
-	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, clk_hw_data);
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, &clp->clk_data);
 }
 
 static const struct of_device_id loongson2_clk_match_table[] = {
-	{ .compatible = "loongson,ls2k-clk" },
+	{ .compatible = "loongson,ls2k-clk", .data = &ls2k1000_clks },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, loongson2_clk_match_table);
@@ -338,4 +276,5 @@ static struct platform_driver loongson2_clk_driver = {
 module_platform_driver(loongson2_clk_driver);
 
 MODULE_DESCRIPTION("Loongson2 clock driver");
+MODULE_AUTHOR("Loongson Technology Corporation Limited");
 MODULE_LICENSE("GPL");
-- 
2.43.0

[PATCH v1 3/8] dt-bindings: clock: loongson2: add Loongson-2K0500 compatible

[Binbin Zhou]

Add the devicetree compatible for Loongson-2K0500 clocks.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
---
 Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
index 63a59015987e..83baee40e200 100644
--- a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
@@ -16,7 +16,8 @@ description: |
 properties:
   compatible:
     enum:
-      - loongson,ls2k-clk
+      - loongson,ls2k0500-clk
+      - loongson,ls2k-clk  # This is for Loongson-2K1000
 
   reg:
     maxItems: 1
-- 
2.43.0

Re: [PATCH v1 3/8] dt-bindings: clock: loongson2: add Loongson-2K0500 compatible

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 989 bytes --]

On Tue, Mar 26, 2024 at 05:01:02PM +0800, Binbin Zhou wrote:
> Add the devicetree compatible for Loongson-2K0500 clocks.
> 
> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
> ---
>  Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
> index 63a59015987e..83baee40e200 100644
> --- a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
> +++ b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
> @@ -16,7 +16,8 @@ description: |
>  properties:
>    compatible:
>      enum:
> -      - loongson,ls2k-clk
> +      - loongson,ls2k0500-clk
> +      - loongson,ls2k-clk  # This is for Loongson-2K1000

Ah yes, the generic "ls2k" compatibles strike again :)
Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH v1 4/8] clk: clk-loongson2: Add Loongson-2K0500 clock support

[Binbin Zhou]

The Loongson-2K0500 and Loongson-2K1000 clock is similar, we add its
support by different configurations.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
---
 drivers/clk/clk-loongson2.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c
index 00e384290314..4e3b287ff9a0 100644
--- a/drivers/clk/clk-loongson2.c
+++ b/drivers/clk/clk-loongson2.c
@@ -90,6 +90,27 @@ struct loongson2_clk_board_info {
 		.div_width	= _dwidth,			\
 	}
 
+static const struct loongson2_clk_board_info ls2k0500_clks[] = {
+	CLK_PLL(LOONGSON2_NODE_PLL,   "pll_node", 0,    16, 8, 8, 6),
+	CLK_PLL(LOONGSON2_DDR_PLL,    "pll_ddr",  0x8,  16, 8, 8, 6),
+	CLK_PLL(LOONGSON2_DC_PLL,     "pll_soc",  0x10, 16, 8, 8, 6),
+	CLK_PLL(LOONGSON2_PIX0_PLL,   "pll_pix0", 0x18, 16, 8, 8, 6),
+	CLK_PLL(LOONGSON2_PIX1_PLL,   "pll_pix1", 0x20, 16, 8, 8, 6),
+	CLK_DIV(LOONGSON2_NODE_CLK,   "clk_node", "pll_node", 0,    24, 6),
+	CLK_DIV(LOONGSON2_DDR_CLK,    "clk_ddr",  "pll_ddr",  0x8,  24, 6),
+	CLK_DIV(LOONGSON2_HDA_CLK,    "clk_hda",  "pll_ddr",  0xc,  8,  6),
+	CLK_DIV(LOONGSON2_GPU_CLK,    "clk_gpu",  "pll_soc",  0x10, 24, 6),
+	CLK_DIV(LOONGSON2_DC_CLK,     "clk_sb",   "pll_soc",  0x14, 0,  6),
+	CLK_DIV(LOONGSON2_GMAC_CLK,   "clk_gmac", "pll_soc",  0x14, 8,  6),
+	CLK_DIV(LOONGSON2_PIX0_CLK,   "clk_pix0", "pll_pix0", 0x18, 24, 6),
+	CLK_DIV(LOONGSON2_PIX1_CLK,   "clk_pix1", "pll_pix1", 0x20, 24, 6),
+	CLK_SCALE(LOONGSON2_BOOT_CLK, "clk_boot", "clk_sb",   0x28, 8,  3),
+	CLK_SCALE(LOONGSON2_SATA_CLK, "clk_sata", "clk_sb",   0x28, 12, 3),
+	CLK_SCALE(LOONGSON2_USB_CLK,  "clk_usb",  "clk_sb",   0x28, 16, 3),
+	CLK_SCALE(LOONGSON2_APB_CLK,  "clk_apb",  "clk_sb",   0x28, 20, 3),
+	{ /* Sentinel */ },
+};
+
 static const struct loongson2_clk_board_info ls2k1000_clks[] = {
 	CLK_PLL(LOONGSON2_NODE_PLL,   "pll_node", 0,    32, 10, 26, 6),
 	CLK_PLL(LOONGSON2_DDR_PLL,    "pll_ddr",  0x10, 32, 10, 26, 6),
@@ -261,6 +282,7 @@ static int loongson2_clk_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id loongson2_clk_match_table[] = {
+	{ .compatible = "loongson,ls2k0500-clk", .data = &ls2k0500_clks },
 	{ .compatible = "loongson,ls2k-clk", .data = &ls2k1000_clks },
 	{ }
 };
-- 
2.43.0

[PATCH v1 5/8] dt-bindings: clock: loongson2: add Loongson-2K2000 compatible

[Binbin Zhou]

Add the devicetree compatible for Loongson-2K2000 clocks.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
---
 Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
index 83baee40e200..4f79cdb417ab 100644
--- a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
@@ -18,6 +18,7 @@ properties:
     enum:
       - loongson,ls2k0500-clk
       - loongson,ls2k-clk  # This is for Loongson-2K1000
+      - loongson,ls2k2000-clk
 
   reg:
     maxItems: 1
-- 
2.43.0

Re: [PATCH v1 5/8] dt-bindings: clock: loongson2: add Loongson-2K2000 compatible

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 882 bytes --]

On Tue, Mar 26, 2024 at 05:01:25PM +0800, Binbin Zhou wrote:
> Add the devicetree compatible for Loongson-2K2000 clocks.
> 
> Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
> ---
>  Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
> index 83baee40e200..4f79cdb417ab 100644
> --- a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
> +++ b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
> @@ -18,6 +18,7 @@ properties:
>      enum:
>        - loongson,ls2k0500-clk
>        - loongson,ls2k-clk  # This is for Loongson-2K1000
> +      - loongson,ls2k2000-clk

Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[PATCH v1 6/8] clk: clk-loongson2: Add Loongson-2K2000 clock support

[Binbin Zhou]

The Loongson-2K2000 and Loongson-2K1000 clock is similar, we add its
support by different configurations.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
---
 drivers/clk/clk-loongson2.c | 72 +++++++++++++++++++++++++++++++++++++
 1 file changed, 72 insertions(+)

diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c
index 4e3b287ff9a0..271de0e10518 100644
--- a/drivers/clk/clk-loongson2.c
+++ b/drivers/clk/clk-loongson2.c
@@ -22,6 +22,8 @@ enum loongson2_clk_type {
 	CLK_TYPE_PLL,
 	CLK_TYPE_SCALE,
 	CLK_TYPE_DIVIDER,
+	CLK_TYPE_GATE,
+	CLK_TYPE_FIXED,
 	CLK_TYPE_NONE,
 };
 
@@ -46,11 +48,13 @@ struct loongson2_clk_board_info {
 	enum loongson2_clk_type type;
 	const char *name;
 	const char *parent_name;
+	unsigned long fixed_rate;
 	u8 reg_offset;
 	u8 div_shift;
 	u8 div_width;
 	u8 mult_shift;
 	u8 mult_width;
+	u8 bit_idx;
 };
 
 #define CLK_DIV(_id, _name, _pname, _offset, _dshift, _dwidth)	\
@@ -90,6 +94,25 @@ struct loongson2_clk_board_info {
 		.div_width	= _dwidth,			\
 	}
 
+#define CLK_GATE(_id, _name, _pname, _offset, _bidx)		\
+	{							\
+		.id		= _id,				\
+		.type		= CLK_TYPE_GATE,		\
+		.name		= _name,			\
+		.parent_name	= _pname,			\
+		.reg_offset	= _offset,			\
+		.bit_idx	= _bidx,			\
+	}
+
+#define CLK_FIXED(_id, _name, _pname, _rate)			\
+	{							\
+		.id		= _id,				\
+		.type		= CLK_TYPE_FIXED,		\
+		.name		= _name,			\
+		.parent_name	= _pname,			\
+		.fixed_rate	= _rate,			\
+	}
+
 static const struct loongson2_clk_board_info ls2k0500_clks[] = {
 	CLK_PLL(LOONGSON2_NODE_PLL,   "pll_node", 0,    16, 8, 8, 6),
 	CLK_PLL(LOONGSON2_DDR_PLL,    "pll_ddr",  0x8,  16, 8, 8, 6),
@@ -138,6 +161,44 @@ static const struct loongson2_clk_board_info ls2k1000_clks[] = {
 	{ /* Sentinel */ },
 };
 
+static const struct loongson2_clk_board_info ls2k2000_clks[] = {
+	CLK_PLL(LOONGSON2_DC_PLL,     "pll_0",    0,    21, 9, 32, 6),
+	CLK_PLL(LOONGSON2_DDR_PLL,    "pll_1",    0x10, 21, 9, 32, 6),
+	CLK_PLL(LOONGSON2_NODE_PLL,   "pll_2",    0x20, 21, 9, 32, 6),
+	CLK_PLL(LOONGSON2_PIX0_PLL,   "pll_pix0", 0x30, 21, 9, 32, 6),
+	CLK_PLL(LOONGSON2_PIX1_PLL,   "pll_pix1", 0x40, 21, 9, 32, 6),
+	CLK_GATE(LOONGSON2_OUT0_GATE, "out0_gate", "pll_0",    0,    40),
+	CLK_GATE(LOONGSON2_GMAC_GATE, "gmac_gate", "pll_0",    0,    41),
+	CLK_GATE(LOONGSON2_RIO_GATE,  "rio_gate",  "pll_0",    0,    42),
+	CLK_GATE(LOONGSON2_DC_GATE,   "dc_gate",   "pll_1",    0x10, 40),
+	CLK_GATE(LOONGSON2_DDR_GATE,  "ddr_gate",  "pll_1",    0x10, 41),
+	CLK_GATE(LOONGSON2_GPU_GATE,  "gpu_gate",  "pll_1",    0x10, 42),
+	CLK_GATE(LOONGSON2_HDA_GATE,  "hda_gate",  "pll_2",    0x20, 40),
+	CLK_GATE(LOONGSON2_NODE_GATE, "node_gate", "pll_2",    0x20, 41),
+	CLK_GATE(LOONGSON2_EMMC_GATE, "emmc_gate", "pll_2",    0x20, 42),
+	CLK_GATE(LOONGSON2_PIX0_GATE, "pix0_gate", "pll_pix0", 0x30, 40),
+	CLK_GATE(LOONGSON2_PIX1_GATE, "pix1_gate", "pll_pix1", 0x40, 40),
+	CLK_DIV(LOONGSON2_OUT0_CLK,   "clk_out0", "out0_gate", 0,    0,  6),
+	CLK_DIV(LOONGSON2_GMAC_CLK,   "clk_gmac", "gmac_gate", 0,    7,  6),
+	CLK_DIV(LOONGSON2_RIO_CLK,    "clk_rio",  "rio_gate",  0,    14, 6),
+	CLK_DIV(LOONGSON2_DC_CLK,     "clk_dc",   "dc_gate",   0x10, 0,  6),
+	CLK_DIV(LOONGSON2_GPU_CLK,    "clk_gpu",  "gpu_gate",  0x10, 7,  6),
+	CLK_DIV(LOONGSON2_DDR_CLK,    "clk_ddr",  "ddr_gate",  0x10, 14, 6),
+	CLK_DIV(LOONGSON2_HDA_CLK,    "clk_hda",  "hda_gate",  0x20, 0,  6),
+	CLK_DIV(LOONGSON2_NODE_CLK,   "clk_node", "node_gate", 0x20, 7,  6),
+	CLK_DIV(LOONGSON2_EMMC_CLK,   "clk_emmc", "emmc_gate", 0x20, 14, 6),
+	CLK_DIV(LOONGSON2_PIX0_CLK,   "clk_pix0", "pll_pix0",  0x30, 0,  6),
+	CLK_DIV(LOONGSON2_PIX1_CLK,   "clk_pix1", "pll_pix1",  0x40, 0,  6),
+	CLK_SCALE(LOONGSON2_SATA_CLK, "clk_sata", "clk_out0",  0x50, 12, 3),
+	CLK_SCALE(LOONGSON2_USB_CLK,  "clk_usb",  "clk_out0",  0x50, 16, 3),
+	CLK_SCALE(LOONGSON2_APB_CLK,  "clk_apb",  "clk_node",  0x50, 20, 3),
+	CLK_SCALE(LOONGSON2_BOOT_CLK, "clk_boot", NULL,        0x50, 23, 3),
+	CLK_SCALE(LOONGSON2_DES_CLK,  "clk_des",  "clk_node",  0x50, 40, 3),
+	CLK_SCALE(LOONGSON2_I2S_CLK,  "clk_i2s",  "clk_node",  0x50, 44, 3),
+	CLK_FIXED(LOONGSON2_MISC_CLK, "clk_misc", NULL, 50000000),
+	{ /* Sentinel */ },
+};
+
 static inline struct loongson2_clk_data *to_loongson2_clk(struct clk_hw *hw)
 {
 	return container_of(hw, struct loongson2_clk_data, hw);
@@ -266,6 +327,16 @@ static int loongson2_clk_probe(struct platform_device *pdev)
 							  CLK_DIVIDER_ONE_BASED,
 							  &clp->clk_lock);
 			break;
+		case CLK_TYPE_GATE:
+			hw = devm_clk_hw_register_gate(dev, p->name, p->parent_name, 0,
+						       clp->base + p->reg_offset,
+						       p->bit_idx, 0,
+						       &clp->clk_lock);
+			break;
+		case CLK_TYPE_FIXED:
+			hw = clk_hw_register_fixed_rate_parent_data(dev, p->name, pdata,
+								    0, p->fixed_rate);
+			break;
 		default:
 			return dev_err_probe(dev, -EINVAL, "Invalid clk type\n");
 		}
@@ -284,6 +355,7 @@ static int loongson2_clk_probe(struct platform_device *pdev)
 static const struct of_device_id loongson2_clk_match_table[] = {
 	{ .compatible = "loongson,ls2k0500-clk", .data = &ls2k0500_clks },
 	{ .compatible = "loongson,ls2k-clk", .data = &ls2k1000_clks },
+	{ .compatible = "loongson,ls2k2000-clk", .data = &ls2k2000_clks },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, loongson2_clk_match_table);
-- 
2.43.0

[PATCH v1 7/8] LoongArch: dts: Add clock support to Loongson-2K0500

[Binbin Zhou]

The module is supported, enable it.
Also, add the dma node associated with it.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
---
 .../boot/dts/loongson-2k0500-ref.dts          |  4 ++
 arch/loongarch/boot/dts/loongson-2k0500.dtsi  | 57 ++++++++++++++++++-
 2 files changed, 58 insertions(+), 3 deletions(-)

diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
index 8aefb0c12672..62dad6297e82 100644
--- a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
+++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts
@@ -41,6 +41,10 @@ linux,cma {
 	};
 };
 
+&clk {
+	status = "okay";
+};
+
 &gmac0 {
 	status = "okay";
 
diff --git a/arch/loongarch/boot/dts/loongson-2k0500.dtsi b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
index 444779c21034..413b83366367 100644
--- a/arch/loongarch/boot/dts/loongson-2k0500.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k0500.dtsi
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
 
 / {
 	#address-cells = <2>;
@@ -19,14 +20,15 @@ cpu0: cpu@0 {
 			compatible = "loongson,la264";
 			device_type = "cpu";
 			reg = <0x0>;
-			clocks = <&cpu_clk>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
 		};
 	};
 
-	cpu_clk: cpu-clk {
+	ref_100m: clock-ref-100m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <500000000>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ref_100m";
 	};
 
 	cpuintc: interrupt-controller {
@@ -52,6 +54,55 @@ isa@16400000 {
 			ranges = <1 0x0 0x0 0x16400000 0x4000>;
 		};
 
+		clk: clock-controller@1fe10400 {
+			compatible = "loongson,ls2k0500-clk";
+			reg = <0x0 0x1fe10400 0x0 0x2c>;
+			#clock-cells = <1>;
+			clocks = <&ref_100m>;
+			clock-names = "ref_100m";
+			status = "disabled";
+		};
+
+		dma-controller@1fe10c00 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c00 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <67>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe10c10 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c10 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <68>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe10c20 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c20 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <69>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		dma-controller@1fe10c30 {
+			compatible = "loongson,ls2k0500-apbdma", "loongson,ls2k1000-apbdma";
+			reg = <0 0x1fe10c30 0 0x8>;
+			interrupt-parent = <&eiointc>;
+			interrupts = <70>;
+			clocks = <&clk LOONGSON2_APB_CLK>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
 		liointc0: interrupt-controller@1fe11400 {
 			compatible = "loongson,liointc-2.0";
 			reg = <0x0 0x1fe11400 0x0 0x40>,
-- 
2.43.0

[PATCH v1 8/8] LoongArch: dts: Add clock support to Loongson-2K2000

[Binbin Zhou]

The module is supported, enable it.

Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
---
 .../boot/dts/loongson-2k2000-ref.dts          |  4 ++++
 arch/loongarch/boot/dts/loongson-2k2000.dtsi  | 19 +++++++++++++++----
 2 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
index dca91caf895e..a7af345b30ea 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
+++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
@@ -39,6 +39,10 @@ linux,cma {
 	};
 };
 
+&clk {
+	status = "okay";
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
index a231949b5f55..605efaba7292 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/loongson,ls2k-clk.h>
 
 / {
 	#address-cells = <2>;
@@ -19,21 +20,22 @@ cpu0: cpu@1 {
 			compatible = "loongson,la364";
 			device_type = "cpu";
 			reg = <0x0>;
-			clocks = <&cpu_clk>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
 		};
 
 		cpu1: cpu@2 {
 			compatible = "loongson,la364";
 			device_type = "cpu";
 			reg = <0x1>;
-			clocks = <&cpu_clk>;
+			clocks = <&clk LOONGSON2_NODE_CLK>;
 		};
 	};
 
-	cpu_clk: cpu-clk {
+	ref_100m: clock-ref-100m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <1400000000>;
+		clock-frequency = <100000000>;
+		clock-output-names = "ref_100m";
 	};
 
 	cpuintc: interrupt-controller {
@@ -51,6 +53,15 @@ bus@10000000 {
 		#address-cells = <2>;
 		#size-cells = <2>;
 
+		clk: clock-controller@10010480 {
+			compatible = "loongson,ls2k2000-clk";
+			reg = <0x0 0x10010480 0x0 0x100>;
+			#clock-cells = <1>;
+			clocks = <&ref_100m>;
+			clock-names = "ref_100m";
+			status = "disabled";
+		};
+
 		pmc: power-management@100d0000 {
 			compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon";
 			reg = <0x0 0x100d0000 0x0 0x58>;
-- 
2.43.0