[PATCH 0/4] Fix RP1 DeviceTree hierarchy and drop overlay support

[Andrea della Porta <andrea.porta@suse.com>]

The current RP1 implementation is plagued by several issues, as follows:

- the node name for RP1 is too specific and should be generic instead
  (see [1]).

- the fully defined DTS has its PCI hierarchy wrongly described. There
  should be a PCI root port between the root complex and the endpoint
  (see [1]).

- since CONFIG_PCI_DYNAMIC_OF_NODES can be dropped in the future
  becoming an automatically enabled feature, it would be wise to not
  depend on it (see [2]).

- overlay support has led to a lot of confusion. It's not really usable 
  right now and users are not even used to it (see [3]).

This patch aims at solving the aforementioned problems by amending the
PCI topology as follows:

  ...
  pcie@1000120000 {
    ...

    pci@0,0 {
      device_type = "pci";
      reg = <0x00 0x00 0x00 0x00 0x00>;
      ...

      dev@0,0 {
        compatible = "pci1de4,1";
        reg = <0x10000 0x00 0x00 0x00 0x00>;
        ...

        pci-ep-bus@1 {
          compatible = "simple-bus";
          ...

          /* peripherals child nodes */
        }; 
      }; 
    }; 
  }; 

The reg property is important since it permits the binding the OF
device_node structure to the pci_dev, encoding the BDF in the upper
portion of the address.

This patch also drops the overlay support in favor of the fully
described DT while streamlining it as a result.

Links:
[1] - https://lore.kernel.org/all/aTvz_OeVnciiqATz@apocalypse/
[2] - https://lore.kernel.org/all/CAL_JsqJUzB71QdMcxJtNZ7raoPcK+SfTh7EVzGmk=syo8xLKQw@mail.gmail.com/
[3] - https://lore.kernel.org/all/CAL_JsqJUzB71QdMcxJtNZ7raoPcK+SfTh7EVzGmk=syo8xLKQw@mail.gmail.com/

Andrea della Porta (4):
  dt-bindings: misc: pci1de4,1: add required reg property for endpoint
  misc: rp1: drop overlay support
  arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
  arm64: dts: broadcom: rp1: drop RP1 overlay

 .../devicetree/bindings/misc/pci1de4,1.yaml   |  8 +++-
 arch/arm64/boot/dts/broadcom/Makefile         |  4 +-
 ...-ovl-rp1.dts => bcm2712-rpi-5-b-base.dtsi} |  0
 .../boot/dts/broadcom/bcm2712-rpi-5-b.dts     | 39 ++++++++++++-------
 arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi   | 14 -------
 arch/arm64/boot/dts/broadcom/rp1.dtso         | 11 ------
 drivers/misc/rp1/Kconfig                      |  6 +--
 drivers/misc/rp1/Makefile                     |  3 +-
 drivers/misc/rp1/rp1-pci.dtso                 | 25 ------------
 drivers/misc/rp1/rp1_pci.c                    | 37 ++----------------
 drivers/pci/quirks.c                          |  1 -
 11 files changed, 40 insertions(+), 108 deletions(-)
 rename arch/arm64/boot/dts/broadcom/{bcm2712-rpi-5-b-ovl-rp1.dts => bcm2712-rpi-5-b-base.dtsi} (100%)
 delete mode 100644 arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi
 delete mode 100644 arch/arm64/boot/dts/broadcom/rp1.dtso
 delete mode 100644 drivers/misc/rp1/rp1-pci.dtso

-- 
2.35.3