* [PATCH v6 1/2] dt-bindings: altera: Add fallback compatible for Stratix 10 SoCDK eMMC variant
2026-02-24 6:01 [PATCH v6 0/2] Add eMMC support for Stratix 10 SoCDK tzeyee.ng
@ 2026-02-24 6:01 ` tzeyee.ng
2026-02-24 6:01 ` [PATCH v6 2/2] arm64: dts: socfpga: stratix10: Add emmc support tzeyee.ng
2026-02-25 3:59 ` [PATCH v6 0/2] Add eMMC support for Stratix 10 SoCDK Dinh Nguyen
2 siblings, 0 replies; 4+ messages in thread
From: tzeyee.ng @ 2026-02-24 6:01 UTC (permalink / raw)
To: Dinh Nguyen, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree, linux-kernel
From: Ng Tze Yee <tzeyee.ng@altera.com>
Stratix 10 devkit support a separate eMMC daughter card. Add compatible
string for the Stratix 10 SoCDK eMMC daughter board with
"altr,socfpga-stratix10-socdk" as a fallback, since this variant is based
on the standard SoCDK board.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
---
Changes in v6:
- Rebased to v7.0-rc1
- No code change
Changes in v5:
- Move Acked-by's above the Signed-off-by: and remove the empty
line between them.
- No code change
Changes in v4:
- Included Acked-by from Rob Herring and Krzysztof Kozlowski in the commit
message
- No code change
Changes in v2:
- Added fallback compatible string "altr,socfpga-stratix10-socdk" in the
binding documentation for broader compatibility
---
Documentation/devicetree/bindings/arm/altera.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml
index 13a3a9696821..712916b7447a 100644
--- a/Documentation/devicetree/bindings/arm/altera.yaml
+++ b/Documentation/devicetree/bindings/arm/altera.yaml
@@ -84,6 +84,12 @@ properties:
- altr,socfpga-stratix10-swvp
- const: altr,socfpga-stratix10
+ - description: Stratix 10 SoCDK eMMC variant
+ items:
+ - const: altr,socfpga-stratix10-socdk-emmc
+ - const: altr,socfpga-stratix10-socdk
+ - const: altr,socfpga-stratix10
+
- description: AgileX boards
items:
- enum:
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v6 2/2] arm64: dts: socfpga: stratix10: Add emmc support
2026-02-24 6:01 [PATCH v6 0/2] Add eMMC support for Stratix 10 SoCDK tzeyee.ng
2026-02-24 6:01 ` [PATCH v6 1/2] dt-bindings: altera: Add fallback compatible for Stratix 10 SoCDK eMMC variant tzeyee.ng
@ 2026-02-24 6:01 ` tzeyee.ng
2026-02-25 3:59 ` [PATCH v6 0/2] Add eMMC support for Stratix 10 SoCDK Dinh Nguyen
2 siblings, 0 replies; 4+ messages in thread
From: tzeyee.ng @ 2026-02-24 6:01 UTC (permalink / raw)
To: Dinh Nguyen, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree, linux-kernel
From: Ng Tze Yee <tzeyee.ng@altera.com>
The Stratix10 devkit supports a separate eMMC daughter card. The eMMC
daughter card replaces the SDMMC slot that is on the default daughter card
and thus requires a separate board dts file.
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
---
Changes in v6:
- Rebased to v7.0-rc1
- No code change
Changes in v3:
- Refactored socfpga_stratix10_socdk.dts to use socfpga_stratix10_socdk.dtsi
for common board configurations, eliminating code duplication
- Moved gmac2 and i2c2 nodes from socfpga_stratix10_socdk.dtsi back to
socfpga_stratix10_socdk_emmc.dts as they are specific to the eMMC
daughter board variant and not common to all Stratix 10 SoCDK boards
- Fixed PHY address in socfpga_stratix10_socdk.dts from @0 to @4
Changes in v2:
- Introduced socfpga_stratix10_socdk.dtsi for common board settings
- Updated socfpga_stratix10_socdk_emmc.dts to include the new dtsi
- Added fallback compatible string "altr,socfpga-stratix10-socdk" in
the socfpga_stratix10_socdk_emmc.dts
---
arch/arm64/boot/dts/altera/Makefile | 1 +
.../dts/altera/socfpga_stratix10_socdk.dts | 67 +--------------
.../dts/altera/socfpga_stratix10_socdk.dtsi | 71 ++++++++++++++++
.../altera/socfpga_stratix10_socdk_emmc.dts | 81 +++++++++++++++++++
4 files changed, 155 insertions(+), 65 deletions(-)
create mode 100755 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dtsi
create mode 100755 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts
diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile
index 1bf0c472f6b4..540bb5ae746b 100644
--- a/arch/arm64/boot/dts/altera/Makefile
+++ b/arch/arm64/boot/dts/altera/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_stratix10_socdk.dtb \
+ socfpga_stratix10_socdk_emmc.dtb \
socfpga_stratix10_socdk_nand.dtb \
socfpga_stratix10_swvp.dtb
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 4ae18a013bbe..e2a1cea7f3da 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -3,53 +3,11 @@
* Copyright Altera Corporation (C) 2015. All rights reserved.
*/
-#include "socfpga_stratix10.dtsi"
+#include "socfpga_stratix10_socdk.dtsi"
/ {
model = "SoCFPGA Stratix 10 SoCDK";
compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10";
-
- aliases {
- serial0 = &uart0;
- ethernet0 = &gmac0;
- ethernet1 = &gmac1;
- ethernet2 = &gmac2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
- led-hps0 {
- label = "hps_led0";
- gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
- };
-
- led-hps1 {
- label = "hps_led1";
- gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
- };
-
- led-hps2 {
- label = "hps_led2";
- gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- /* We expect the bootloader to fill in the reg */
- reg = <0 0x80000000 0 0>;
- };
-
- ref_033v: regulator-v-ref {
- compatible = "regulator-fixed";
- regulator-name = "0.33V";
- regulator-min-microvolt = <330000>;
- regulator-max-microvolt = <330000>;
- };
};
&pinctrl0 {
@@ -68,10 +26,6 @@ i2c1_pmx_func_gpio: i2c1-pmx-func-gpio-pins {
};
};
-&gpio1 {
- status = "okay";
-};
-
&gmac0 {
status = "okay";
phy-mode = "rgmii";
@@ -83,7 +37,7 @@ mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
- phy0: ethernet-phy@0 {
+ phy0: ethernet-phy@4 {
reg = <4>;
txd0-skew-ps = <0>; /* -420ps */
@@ -111,23 +65,6 @@ &mmc {
clk-phase-sd-hs = <0>, <135>;
};
-&osc1 {
- clock-frequency = <25000000>;
-};
-
-&uart0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- disable-over-current;
-};
-
-&watchdog0 {
- status = "okay";
-};
-
&i2c1 {
status = "okay";
clock-frequency = <100000>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dtsi
new file mode 100755
index 000000000000..1d50f7b21160
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2026. All rights reserved.
+ */
+
+#include "socfpga_stratix10.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led-hps0 {
+ label = "hps_led0";
+ gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-hps1 {
+ label = "hps_led1";
+ gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-hps2 {
+ label = "hps_led2";
+ gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0x80000000 0 0>;
+ };
+
+ ref_033v: regulator-0v33-ref {
+ compatible = "regulator-fixed";
+ regulator-name = "0.33V";
+ regulator-min-microvolt = <330000>;
+ regulator-max-microvolt = <330000>;
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&osc1 {
+ clock-frequency = <25000000>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ disable-over-current;
+};
+
+&watchdog0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts
new file mode 100755
index 000000000000..b2a3449638dd
--- /dev/null
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright Altera Corporation (C) 2026. All rights reserved.
+ */
+
+#include "socfpga_stratix10_socdk.dtsi"
+
+/ {
+ model = "SoCFPGA Stratix 10 SoCDK eMMC daughter board";
+ compatible = "altr,socfpga-stratix10-socdk-emmc",
+ "altr,socfpga-stratix10-socdk",
+ "altr,socfpga-stratix10";
+};
+
+&gmac2 {
+ status = "okay";
+ /* PHY delays is configured via skew properties */
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ max-frame-size = <9000>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <900>; /* 0ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ };
+ };
+};
+
+&mmc {
+ status = "okay";
+ cap-mmc-highspeed;
+ broken-cd;
+ bus-width = <4>;
+ clk-phase-sd-hs = <0>, <135>;
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <100000>;
+ i2c-sda-falling-time-ns = <890>; /* hcnt */
+ i2c-scl-falling-time-ns = <890>; /* lcnt */
+
+ adc@14 {
+ compatible = "lltc,ltc2497";
+ reg = <0x14>;
+ vref-supply = <&ref_033v>;
+ };
+
+ temp@4c {
+ compatible = "maxim,max1619";
+ reg = <0x4c>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ pagesize = <32>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v6 0/2] Add eMMC support for Stratix 10 SoCDK
2026-02-24 6:01 [PATCH v6 0/2] Add eMMC support for Stratix 10 SoCDK tzeyee.ng
2026-02-24 6:01 ` [PATCH v6 1/2] dt-bindings: altera: Add fallback compatible for Stratix 10 SoCDK eMMC variant tzeyee.ng
2026-02-24 6:01 ` [PATCH v6 2/2] arm64: dts: socfpga: stratix10: Add emmc support tzeyee.ng
@ 2026-02-25 3:59 ` Dinh Nguyen
2 siblings, 0 replies; 4+ messages in thread
From: Dinh Nguyen @ 2026-02-25 3:59 UTC (permalink / raw)
To: tzeyee.ng, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
devicetree, linux-kernel
On 2/24/26 00:01, tzeyee.ng@altera.com wrote:
> From: Ng Tze Yee <tzeyee.ng@altera.com>
>
> The first patch adds the device tree binding documentation for the new
> board compatible string. The second patch introduces a new base device
> tree include file (socfpga_stratix10_socdk.dtsi) containing common board
> configurations, and the eMMC-specific device tree file
> (socfpga_stratix10_socdk_emmc.dts) that includes the base dtsi along
> with eMMC controller configuration.
>
> This follows a hierarchical structure:
> - socfpga_stratix10.dtsi: SoC-level definitions
> - socfpga_stratix10_socdk.dtsi: Board-level common configurations
> - socfpga_stratix10_socdk_emmc.dts: eMMC daughter board specifics
>
> Changes in v6:
> - Rebased to v7.0-rc1
> - No code change
>
> Changes in v5:
> - Move Acked-by's above the Signed-off-by: and remove the empty
> line between them.
> - No code change
>
> Changes in v4:
> - Included Acked-by from Rob Herring and Krzysztof Kozlowski in the second
> patch commit message
> - No code change
>
> Changes in v3:
> - Refactor socfpga_stratix10_socdk.dts to use the new common dtsi file,
> eliminating code duplication
> - Move gmac2 and i2c2 nodes from socfpga_stratix10_socdk.dtsi to
> socfpga_stratix10_socdk_emmc.dts as they are specific to the eMMC
> daughter board variant
> - Fix PHY address in socfpga_stratix10_socdk.dts from @0 to @4
>
> Changes in v2:
> - Introduced socfpga_stratix10_socdk.dtsi for common board settings
> - Updated socfpga_stratix10_socdk_emmc.dts to include the new dtsi
> - Added fallback compatible string "altr,socfpga-stratix10-socdk" in
> the binding documentation for broader compatibility
>
> Ng Tze Yee (2):
> dt-bindings: altera: Add fallback compatible for Stratix 10 SoCDK eMMC
> variant
> arm64: dts: socfpga: stratix10: Add emmc support
>
> .../devicetree/bindings/arm/altera.yaml | 6 ++
> arch/arm64/boot/dts/altera/Makefile | 1 +
> .../dts/altera/socfpga_stratix10_socdk.dts | 67 +--------------
> .../dts/altera/socfpga_stratix10_socdk.dtsi | 71 ++++++++++++++++
> .../altera/socfpga_stratix10_socdk_emmc.dts | 81 +++++++++++++++++++
> 5 files changed, 161 insertions(+), 65 deletions(-)
> create mode 100755 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dtsi
> create mode 100755 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_emmc.dts
>
Applied!
Thanks,
Dinh
^ permalink raw reply [flat|nested] 4+ messages in thread