[PATCH v4 0/3] Add support for Variscite DART-MX91 and Sonata board

[PATCH v4 0/3] Add support for Variscite DART-MX91 and Sonata board

[Stefano Radaelli]

This patch series adds support for the Variscite DART-MX91 system on
module and the Sonata carrier board.

The series includes:
- Device tree bindings documentation for both SOM and carrier board
- SOM device tree with on-module peripherals
- Sonata carrier board device tree with board-specific features

The implementation follows the standard SOM + carrier board pattern
where the SOM dtsi contains only peripherals mounted on the module,
while carrier-specific interfaces are enabled in the board dts.

v3->v4:
 - Fix space between BUCK4/BUCK5 aned parenthesis
 - Remove unused pinctrl groups

v2->v3:
 - Rebased the series to fix DTS apply issues.

v1->v2:
 - Ordering by hex and node name.

Stefano Radaelli (3):
  dt-bindings: arm: fsl: add Variscite DART-MX91 Boards
  arm64: dts: freescale: Add support for Variscite DART-MX91
  arm64: dts: imx91-var-dart: Add support for Variscite Sonata board

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx91-var-dart-sonata.dts   | 471 ++++++++++++++++++
 .../boot/dts/freescale/imx91-var-dart.dtsi    | 468 +++++++++++++++++
 4 files changed, 946 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx91-var-dart.dtsi


base-commit: a251f9ed77f01f16adaaa1b3d2f568fc1b5acbfd
-- 
2.47.3

[PATCH v4 1/3] dt-bindings: arm: fsl: add Variscite DART-MX91 Boards

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add DT compatible strings for Variscite DART-MX91 SoM and Variscite
development carrier Board.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - Fix space between BUCK4/BUCK5 aned parenthesis
 - Remove unused pinctrl groups

v2->v3:
 - Rebased the series to fix DTS apply issues.

v1->v2:
 - Ordering by hex and node name.

 Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 5716d701292c..be2b88c3d9ee 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1545,6 +1545,12 @@ properties:
           - const: phytec,imx93-phycore-som # phyCORE-i.MX93 SoM
           - const: fsl,imx93
 
+      - description: Variscite DART-MX91 based boards
+        items:
+          - const: variscite,var-dart-mx91-sonata # Variscite DART-MX91 on Sonata Development Board
+          - const: variscite,var-dart-mx91 # Variscite DART-MX91 SOM
+          - const: fsl,imx91
+
       - description: Variscite VAR-SOM-MX93 based boards
         items:
           - const: variscite,var-som-mx93-symphony
-- 
2.47.3

[PATCH v4 2/3] arm64: dts: freescale: Add support for Variscite DART-MX91

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add device tree support for the Variscite DART-MX91 system on module.
This SOM is designed to be used with various carrier boards.

The module includes:
- NXP i.MX91 MPU processor
- Up to 2GB of LPDDR4 memory
- Up to 128GB of eMMC storage memory
- Integrated 10/100/1000 Mbps Ethernet Transceiver
- Codec audio WM8904
- WIFI6 dual-band 802.11ax/ac/a/b/g/n with optional 802.15.4 and Bluetooth

Only SOM-specific peripherals are enabled by default. Carrier board
specific interfaces are left disabled to be enabled in the respective
carrier board device trees.

Link: https://variscite.com/system-on-module-som/i-mx-9/i-mx-91/dart-mx91/

Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - Fix space between BUCK4/BUCK5 aned parenthesis
 - Remove unused pinctrl groups

v2->v3:
 - Rebased the series to fix DTS apply issues.

v1->v2:
 - Ordering by hex and node name.

 .../boot/dts/freescale/imx91-var-dart.dtsi    | 468 ++++++++++++++++++
 1 file changed, 468 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx91-var-dart.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx91-var-dart.dtsi b/arch/arm64/boot/dts/freescale/imx91-var-dart.dtsi
new file mode 100644
index 000000000000..a9e44efad13f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-var-dart.dtsi
@@ -0,0 +1,468 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common dtsi for Variscite DART-MX91
+ *
+ * Link: https://variscite.com/system-on-module-som/i-mx-9/i-mx-91/dart-mx91/
+ *
+ * Copyright (C) 2026 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx91.dtsi"
+
+/ {
+	model = "Variscite DART-MX91 Module";
+	compatible = "variscite,var-dart-mx91", "fsl,imx91";
+
+	sound-wm8904 {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "wm8904-audio";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"IN1L", "Microphone Jack",
+			"IN1R", "Microphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&wm8904>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <10000>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>, /* WIFI_RESET */
+			      <&gpio3 7 GPIO_ACTIVE_LOW>; /* WIFI_PWR_EN */
+	};
+};
+
+&eqos {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-1 = <&pinctrl_eqos_sleep>;
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the SOM PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	snps,clk-csr = <5>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		clock-frequency = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <15000>;
+			reset-deassert-us = <100000>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+			};
+		};
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c3_gpio>;
+	scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	wm8904: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk IMX93_CLK_SAI1_GATE>;
+		clock-names = "mclk";
+		AVDD-supply = <&buck5>;
+		CPVDD-supply = <&buck5>;
+		DBVDD-supply = <&buck4>;
+		DCVDD-supply = <&buck5>;
+		MICVDD-supply = <&buck5>;
+		wlf,drc-cfg-names = "default", "peaklimiter", "tradition",
+				    "soft", "music";
+		/*
+		 * Config registers per name, respectively:
+		 * KNEE_IP = 0,   KNEE_OP = 0,     HI_COMP = 1,   LO_COMP = 1
+		 * KNEE_IP = -24, KNEE_OP = -6,    HI_COMP = 1/4, LO_COMP = 1
+		 * KNEE_IP = -42, KNEE_OP = -3,    HI_COMP = 0,   LO_COMP = 1
+		 * KNEE_IP = -45, KNEE_OP = -9,    HI_COMP = 1/8, LO_COMP = 1
+		 * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1
+		 */
+		wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>,
+				   /bits/ 16 <0x04af 0x324b 0x0010 0x0408>,
+				   /bits/ 16 <0x04af 0x324b 0x0028 0x0704>,
+				   /bits/ 16 <0x04af 0x324b 0x0018 0x078c>,
+				   /bits/ 16 <0x04af 0x324b 0x0010 0x050e>;
+		/* GPIO1 = DMIC_CLK, don't touch others */
+		wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>;
+		/* DMIC is connected to IN1L */
+		wlf,in1l-as-dmicdat1;
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <650000>;
+				regulator-max-microvolt = <2237500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* BT module */
+&lpuart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>, <&pinctrl_bt>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai1>;
+	pinctrl-1 = <&pinctrl_sai1_sleep>;
+	assigned-clocks = <&clk IMX93_CLK_SAI1>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <12288000>;
+	#sound-dai-cells = <0>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+/* WiFi */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
+	pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	keep-power-in-suspend;
+	bus-width = <4>;
+	non-removable;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bt: btgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_MDIO__GPIO4_IO15				0x51e
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_MDC__ENET1_MDC				0x57e
+			MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO			0x57e
+			MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x57e
+			MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x57e
+			MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x57e
+			MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x57e
+			MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC			0x5fe
+			MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x57e
+			MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x57e
+			MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1			0x57e
+			MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x57e
+			MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x57e
+			MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x5fe
+			MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x57e
+			MX91_PAD_UART2_TXD__GPIO1_IO7				0x51e
+		>;
+	};
+
+	pinctrl_eqos_sleep: eqos-sleepgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_MDC__GPIO4_IO0				0x31e
+			MX91_PAD_ENET1_MDIO__GPIO4_IO1				0x31e
+			MX91_PAD_ENET1_RD0__GPIO4_IO10				0x31e
+			MX91_PAD_ENET1_RD1__GPIO4_IO11				0x31e
+			MX91_PAD_ENET1_RD2__GPIO4_IO12				0x31e
+			MX91_PAD_ENET1_RD3__GPIO4_IO13				0x31e
+			MX91_PAD_ENET1_RXC__GPIO4_IO9				0x31e
+			MX91_PAD_ENET1_RX_CTL__GPIO4_IO8			0x31e
+			MX91_PAD_ENET1_TD0__GPIO4_IO5				0x31e
+			MX91_PAD_ENET1_TD1__GPIO4_IO4				0x31e
+			MX91_PAD_ENET1_TD2__GPIO4_IO3				0x31e
+			MX91_PAD_ENET1_TD3__GPIO4_IO2				0x31e
+			MX91_PAD_ENET1_TXC__GPIO4_IO7				0x31e
+			MX91_PAD_ENET1_TX_CTL__GPIO4_IO6			0x31e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX91_PAD_GPIO_IO28__LPI2C3_SDA				0x40000b9e
+			MX91_PAD_GPIO_IO29__LPI2C3_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3_gpio: lpi2c3gpiogrp {
+		fsl,pins = <
+			MX91_PAD_GPIO_IO28__GPIO2_IO28				0x40000b9e
+			MX91_PAD_GPIO_IO29__GPIO2_IO29				0x40000b9e
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX91_PAD_SAI1_TXC__SAI1_TX_BCLK				0x31e
+			MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC			0x31e
+			MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0			0x31e
+			MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0			0x31e
+			MX91_PAD_I2C2_SDA__SAI1_RX_BCLK				0x31e
+			MX91_PAD_I2C2_SCL__SAI1_RX_SYNC				0x31e
+			MX91_PAD_UART2_RXD__SAI1_MCLK				0x31e
+		>;
+	};
+
+	pinctrl_sai1_sleep: sai1-sleepgrp {
+		fsl,pins = <
+			MX91_PAD_SAI1_TXC__GPIO1_IO12				0x31e
+			MX91_PAD_SAI1_TXFS__GPIO1_IO11				0x31e
+			MX91_PAD_SAI1_TXD0__GPIO1_IO13				0x31e
+			MX91_PAD_SAI1_RXD0__GPIO1_IO14				0x31e
+			MX91_PAD_UART2_RXD__GPIO1_IO6				0x31e
+			MX91_PAD_I2C2_SDA__GPIO1_IO3				0x31e
+			MX91_PAD_I2C2_SCL__GPIO1_IO2				0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX			0x31e
+			MX91_PAD_DAP_TDI__LPUART5_RX				0x31e
+			MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B			0x31e
+			MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B			0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK				0x1582
+			MX91_PAD_SD1_CMD__USDHC1_CMD				0x1382
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0			0x1382
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1			0x1382
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2			0x1382
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3			0x1382
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4			0x1382
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5			0x1382
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6			0x1382
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7			0x1382
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE			0x1582
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK				0x158e
+			MX91_PAD_SD1_CMD__USDHC1_CMD				0x138e
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0			0x138e
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1			0x138e
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2			0x138e
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3			0x138e
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4			0x138e
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5			0x138e
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6			0x138e
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7			0x138e
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE			0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK				0x15fe
+			MX91_PAD_SD1_CMD__USDHC1_CMD				0x13fe
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0			0x13fe
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1			0x13fe
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2			0x13fe
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3			0x13fe
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4			0x13fe
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5			0x13fe
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6			0x13fe
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7			0x13fe
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE			0x15fe
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX91_PAD_SD3_CLK__USDHC3_CLK				0x1582
+			MX91_PAD_SD3_CMD__USDHC3_CMD				0x1382
+			MX91_PAD_SD3_DATA0__USDHC3_DATA0			0x1382
+			MX91_PAD_SD3_DATA1__USDHC3_DATA1			0x1382
+			MX91_PAD_SD3_DATA2__USDHC3_DATA2			0x1382
+			MX91_PAD_SD3_DATA3__USDHC3_DATA3			0x1382
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD3_CLK__USDHC3_CLK				0x158e
+			MX91_PAD_SD3_CMD__USDHC3_CMD				0x138e
+			MX91_PAD_SD3_DATA0__USDHC3_DATA0			0x138e
+			MX91_PAD_SD3_DATA1__USDHC3_DATA1			0x138e
+			MX91_PAD_SD3_DATA2__USDHC3_DATA2			0x138e
+			MX91_PAD_SD3_DATA3__USDHC3_DATA3			0x138e
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD3_CLK__USDHC3_CLK				0x15fe
+			MX91_PAD_SD3_CMD__USDHC3_CMD				0x13fe
+			MX91_PAD_SD3_DATA0__USDHC3_DATA0			0x13fe
+			MX91_PAD_SD3_DATA1__USDHC3_DATA1			0x13fe
+			MX91_PAD_SD3_DATA2__USDHC3_DATA2			0x13fe
+			MX91_PAD_SD3_DATA3__USDHC3_DATA3			0x13fe
+		>;
+	};
+
+	pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
+		fsl,pins = <
+			MX91_PAD_SD3_CLK__GPIO3_IO20				0x31e
+			MX91_PAD_SD3_CMD__GPIO3_IO21				0x31e
+			MX91_PAD_SD3_DATA0__GPIO3_IO22				0x31e
+			MX91_PAD_SD3_DATA1__GPIO3_IO23				0x31e
+			MX91_PAD_SD3_DATA2__GPIO3_IO24				0x31e
+			MX91_PAD_SD3_DATA3__GPIO3_IO25				0x31e
+		>;
+	};
+
+	pinctrl_usdhc3_wlan: usdhc3wlangrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_MDC__GPIO4_IO14				0x51e
+			MX91_PAD_SD2_RESET_B__GPIO3_IO7				0x51e
+		>;
+	};
+};
-- 
2.47.3

[PATCH v4 3/3] arm64: dts: imx91-var-dart: Add support for Variscite Sonata board

[Stefano Radaelli]

From: Stefano Radaelli <stefano.r@variscite.com>

Add device tree support for the Variscite Sonata carrier board with
the DART-MX91 system on module.

The Sonata board includes
- uSD Card support
- USB ports and OTG
- Additional Gigabit Ethernet interface
- Uart interfaces
- GPIO Expanders
- RTC module
- TPM module

Link: https://variscite.com/carrier-boards/sonata-board/
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
 - Fix space between BUCK4/BUCK5 aned parenthesis
 - Remove unused pinctrl groups

v2->v3:
 - Rebased the series to fix DTS apply issues.

v1->v2:
 - Ordering by hex and node name.

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx91-var-dart-sonata.dts   | 471 ++++++++++++++++++
 2 files changed, 472 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index e0738525d37e..8ee7d41a367d 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -411,6 +411,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-frdm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-frdm-s.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx91-phyboard-segin.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-var-dart-sonata.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
 
 imx93-9x9-qsb-can1-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-can1.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts b/arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts
new file mode 100644
index 000000000000..afa39dab240a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Variscite Sonata carrier board for DART-MX91
+ *
+ * Link: https://variscite.com/carrier-boards/sonata-board/
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include "imx91-var-dart.dtsi"
+
+/ {
+	model = "Variscite DART-MX91 on Sonata-Board";
+	compatible = "variscite,var-dart-mx91-sonata",
+		     "variscite,var-dart-mx91",
+		     "fsl,imx91";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pca6408_1 4 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-up {
+			label = "Up";
+			linux,code = <KEY_UP>;
+			gpios = <&pca6408_1 5 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-down {
+			label = "Down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&pca6408_1 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pca6408_1 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-emmc {
+			label = "eMMC";
+			gpios = <&pca6408_2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-vmmc-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VDD_SD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		off-on-delay-us = <20000>;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+/* Use external instead of internal RTC */
+&bbnsm_rtc {
+	status = "disabled";
+};
+
+&eqos {
+	mdio {
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&pca6408_2 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <15000>;
+			reset-deassert-us = <100000>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					color = <LED_COLOR_ID_YELLOW>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+
+				led@1 {
+					reg = <1>;
+					color = <LED_COLOR_ID_GREEN>;
+					function = LED_FUNCTION_LAN;
+					linux,default-trigger = "netdev";
+				};
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the SOM PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep", "gpio";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1_gpio>;
+	pinctrl-2 = <&pinctrl_lpi2c1_gpio>;
+	scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pca6408_1: gpio@20 {
+		compatible = "nxp,pcal6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pca6408_2: gpio@21 {
+		compatible = "nxp,pcal6408";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pca9534: gpio@22 {
+		compatible = "nxp,pca9534";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	st33ktpm2xi2c: tpm@2e {
+		compatible = "st,st33ktpm2xi2c", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+	};
+
+	/* Capacitive touch controller */
+	ft5x06_ts: touchscreen@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_captouch>;
+		reset-gpios = <&pca6408_2 4 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		wakeup-source;
+	};
+
+	/* USB Type-C Controller */
+	typec@3d {
+		compatible = "nxp,ptn5150";
+		reg = <0x3d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_extcon>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+/* Console (J10) */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* Header (J12.4, J12.6) */
+&lpuart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usbotg2 {
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* GPIO Expanders shared IRQ */
+			MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10            0x31e
+		>;
+	};
+
+	pinctrl_captouch: captouchgrp {
+		fsl,pins = <
+			MX91_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
+		>;
+	};
+
+	pinctrl_extcon: extcongrp {
+		fsl,pins = <
+			MX91_PAD_CCM_CLKO4__GPIO4_IO29			0x31e
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0             0x57e
+			MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1             0x57e
+			MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2             0x57e
+			MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3             0x37e
+			MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC             0x5fe
+			MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL       0x57e
+			MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0             0x57e
+			MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1             0x57e
+			MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2             0x57e
+			MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3             0x57e
+			MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC             0x5fe
+			MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL       0x57e
+		>;
+	};
+
+	pinctrl_fec_sleep: fecsleepgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_RD0__GPIO4_IO24                  0x51e
+			MX91_PAD_ENET2_RD1__GPIO4_IO25                  0x51e
+			MX91_PAD_ENET2_RD2__GPIO4_IO26                  0x51e
+			MX91_PAD_ENET2_RD3__GPIO4_IO27                  0x31e
+			MX91_PAD_ENET2_RXC__GPIO4_IO23                  0x51e
+			MX91_PAD_ENET2_RX_CTL__GPIO4_IO22               0x51e
+			MX91_PAD_ENET2_TD0__GPIO4_IO19                  0x51e
+			MX91_PAD_ENET2_TD1__GPIO4_IO18                  0x51e
+			MX91_PAD_ENET2_TD2__GPIO4_IO17                  0x51e
+			MX91_PAD_ENET2_TD3__GPIO4_IO16                  0x51e
+			MX91_PAD_ENET2_TXC__GPIO4_IO21                  0x51e
+			MX91_PAD_ENET2_TX_CTL__GPIO4_IO20               0x51e
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX91_PAD_PDM_CLK__CAN1_TX			0x139e
+			MX91_PAD_PDM_BIT_STREAM0__CAN1_RX		0x139e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX91_PAD_I2C1_SCL__LPI2C1_SCL			0x40000b9e
+			MX91_PAD_I2C1_SDA__LPI2C1_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c1_gpio: lpi2c1-gpiogrp {
+		fsl,pins = <
+			MX91_PAD_I2C1_SCL__GPIO1_IO0			0x31e
+			MX91_PAD_I2C1_SDA__GPIO1_IO1			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX91_PAD_CCM_CLKO3__GPIO4_IO28			0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX91_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX91_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX91_PAD_GPIO_IO05__LPUART6_RX			0x31e
+			MX91_PAD_GPIO_IO04__LPUART6_TX			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK			0x1582
+			MX91_PAD_SD2_CMD__USDHC2_CMD			0x1382
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0		0x1382
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1		0x1382
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2		0x1382
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3		0x1382
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK			0x158e
+			MX91_PAD_SD2_CMD__USDHC2_CMD			0x138e
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3		0x138e
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK			0x15fe
+			MX91_PAD_SD2_CMD__USDHC2_CMD			0x13fe
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0		0x13fe
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1		0x13fe
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2		0x13fe
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3		0x13fe
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__GPIO3_IO1			0x51e
+			MX91_PAD_SD2_CMD__GPIO3_IO2			0x51e
+			MX91_PAD_SD2_DATA0__GPIO3_IO3			0x51e
+			MX91_PAD_SD2_DATA1__GPIO3_IO4			0x51e
+			MX91_PAD_SD2_DATA2__GPIO3_IO5			0x51e
+			MX91_PAD_SD2_DATA3__GPIO3_IO6			0x51e
+			MX91_PAD_SD2_VSELECT__GPIO3_IO19		0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0			0x51e
+		>;
+	};
+};
-- 
2.47.3

Re: [PATCH v4 0/3] Add support for Variscite DART-MX91 and Sonata board

[Frank Li]

On Wed, Mar 04, 2026 at 05:59:52PM +0100, Stefano Radaelli wrote:
> This patch series adds support for the Variscite DART-MX91 system on
> module and the Sonata carrier board.
>
> The series includes:
> - Device tree bindings documentation for both SOM and carrier board
> - SOM device tree with on-module peripherals
> - Sonata carrier board device tree with board-specific features
>
> The implementation follows the standard SOM + carrier board pattern
> where the SOM dtsi contains only peripherals mounted on the module,
> while carrier-specific interfaces are enabled in the board dts.
>
> v3->v4:
>  - Fix space between BUCK4/BUCK5 aned parenthesis
>  - Remove unused pinctrl groups
>
> v2->v3:
>  - Rebased the series to fix DTS apply issues.
>
> v1->v2:
>  - Ordering by hex and node name.
>
> Stefano Radaelli (3):
>   dt-bindings: arm: fsl: add Variscite DART-MX91 Boards
>   arm64: dts: freescale: Add support for Variscite DART-MX91
>   arm64: dts: imx91-var-dart: Add support for Variscite Sonata board

Can you rebase to my for-next tree
https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux.git/log/?h=for-next

And new file, run https://github.com/lznuaa/dt-format to keep node nice
ordered.

Frank

>
>  .../devicetree/bindings/arm/fsl.yaml          |   6 +
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  .../dts/freescale/imx91-var-dart-sonata.dts   | 471 ++++++++++++++++++
>  .../boot/dts/freescale/imx91-var-dart.dtsi    | 468 +++++++++++++++++
>  4 files changed, 946 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx91-var-dart-sonata.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx91-var-dart.dtsi
>
>
> base-commit: a251f9ed77f01f16adaaa1b3d2f568fc1b5acbfd
> --
> 2.47.3
>

Re: [PATCH v4 0/3] Add support for Variscite DART-MX91 and Sonata board

[Stefano Radaelli]

Hi Frank,

On Fri, Mar 13, 2026 at 11:13:35AM -0400, Frank Li wrote:
> 
> Can you rebase to my for-next tree
> https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux.git/log/?h=for-next
> 
> And new file, run https://github.com/lznuaa/dt-format to keep node nice
> ordered.
> 

Sure, I will rebase the series on top of your for-next branch and send an
updated version.
If possible, it would be great if the series could be merged as soon as
possible, to avoid having to rebase it again on newer changes.

Regarding dt-format, I can run it, but in my experience it is a bit buggy.
It sometimes moves comments to completely unrelated locations and does not
always keep a logical ordering of nodes. For example, I saw cases where
usdhc3_wlan was moved before usdhc3_sleep, and pinctrl nodes were not kept
at the end of the file.

Best regards,
Stefano

Re: [PATCH v4 0/3] Add support for Variscite DART-MX91 and Sonata board

[Frank Li]

On Fri, Mar 13, 2026 at 04:54:42PM +0100, Stefano Radaelli wrote:
> Hi Frank,
>
> On Fri, Mar 13, 2026 at 11:13:35AM -0400, Frank Li wrote:
> >
> > Can you rebase to my for-next tree
> > https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux.git/log/?h=for-next
> >
> > And new file, run https://github.com/lznuaa/dt-format to keep node nice
> > ordered.
> >
>
> Sure, I will rebase the series on top of your for-next branch and send an
> updated version.
> If possible, it would be great if the series could be merged as soon as
> possible, to avoid having to rebase it again on newer changes.

I try best. I go though as reverse order patchwork order.

https://patchwork.kernel.org/project/imx/list/?series=&submitter=&state=1&q=&archive=&delegate=

Small fix go high priority.

>
> Regarding dt-format, I can run it, but in my experience it is a bit buggy.

Put bugg in issue list, I will fix it.

> It sometimes moves comments to completely unrelated locations and does not
> always keep a logical ordering of nodes.

Logical order is hard to follow. Each one have difference opinion about
logic group. I am trying to normalize and machine script. I use same rule
for every new dts file.  property order is not so important. The key is
node orders, which try to avoid add duplicate one in future.

> For example, I saw cases where usdhc3_wlan was moved before usdhc3_sleep,

> and pinctrl nodes were not kept
> at the end of the file.

About pinctrl nodes at end of the file, we don't stick this rule. There will
be more than one pinctrl nodes.

Frank
>
> Best regards,
> Stefano

Re: [PATCH v4 0/3] Add support for Variscite DART-MX91 and Sonata board

[Stefano Radaelli]

Hi Frank,

On Fri, Mar 13, 2026 at 12:50:49PM -0400, Frank Li wrote:
> On Fri, Mar 13, 2026 at 04:54:42PM +0100, Stefano Radaelli wrote:
> > Hi Frank,
> >
> > On Fri, Mar 13, 2026 at 11:13:35AM -0400, Frank Li wrote:
> > >
> > > Can you rebase to my for-next tree
> > > https://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux.git/log/?h=for-next
> > >
> > > And new file, run https://github.com/lznuaa/dt-format to keep node nice
> > > ordered.
> > >
> >
> > Sure, I will rebase the series on top of your for-next branch and send an
> > updated version.
> > If possible, it would be great if the series could be merged as soon as
> > possible, to avoid having to rebase it again on newer changes.
> 
> I try best. I go though as reverse order patchwork order.
> 
> https://patchwork.kernel.org/project/imx/list/?series=&submitter=&state=1&q=&archive=&delegate=
> 
> Small fix go high priority.
> 
> >
> > Regarding dt-format, I can run it, but in my experience it is a bit buggy.
> 
> Put bugg in issue list, I will fix it.
> 
> > It sometimes moves comments to completely unrelated locations and does not
> > always keep a logical ordering of nodes.
> 
> Logical order is hard to follow. Each one have difference opinion about
> logic group. I am trying to normalize and machine script. I use same rule
> for every new dts file.  property order is not so important. The key is
> node orders, which try to avoid add duplicate one in future.
> 
> > For example, I saw cases where usdhc3_wlan was moved before usdhc3_sleep,
> 
> > and pinctrl nodes were not kept
> > at the end of the file.
> 
> About pinctrl nodes at end of the file, we don't stick this rule. There will
> be more than one pinctrl nodes.
> 

Thank you for the clarification and for the work you are putting into
reviewing and maintaining these patches.

Regarding dt-format, I will open issues for the cases where I noticed
incorrect behavior (such as comments being moved to unrelated sections),
so they can be tracked and fixed.

Thanks again for your support and for maintaining the i.MX tree.

Best regards,
Stefano