From: Binbin Zhou <zhoubinbin@loongson.cn>
To: Binbin Zhou <zhoubb.aaron@gmail.com>,
Huacai Chen <chenhuacai@loongson.cn>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>
Cc: Huacai Chen <chenhuacai@kernel.org>,
Xuerui Wang <kernel@xen0n.name>,
loongarch@lists.linux.dev, devicetree@vger.kernel.org,
linux-sound@vger.kernel.org, Binbin Zhou <zhoubinbin@loongson.cn>
Subject: [PATCH v2 0/7] ASoC: Add Loongson-2K0300 I2S controller and sound card support
Date: Thu, 4 Jun 2026 10:11:20 +0800 [thread overview]
Message-ID: <cover.1780538113.git.zhoubinbin@loongson.cn> (raw)
Hi all:
This series adds ASoC support for the Loongson-2K0300 SoC and its
associated development boards, including the CTCISZ Forever Pi and the
ATK-DL2K0300B.
Key changes:
- Extend DT bindings to support ls2k0300-i2s and new audio card
compatibles.
- Refactor the platform I2S driver to handle SoC differences via per-device
configuration (rev_id, optional APB DMA config, reset sequence).
- Refactor the audio machine driver to support board-specific DAI formats,
GPIO-based headphone detection/mute, speaker enable, and DAPM routing.
- Add jack detection and automatic switching between headphones and
speakers for the DL2K0300B board.
The patchset also cleans up the existing audio card binding by
referencing the common sound-card properties, and adds new compatibles
for the Loongson-2K0300 variants with proper DAI format handling.
All changes have been tested on Loongson-2K2000 (PCI), Loongson-2K0300
Forever Pi and Loongson-2K0300 DL2K0300B boards.
Thanks.
Binbin
========
v2:
- The first four patches for V1 (related to code cleanup) have been
accepted as a separate series. The link is as follows:
https://lore.kernel.org/all/178041371415.93058.4794135670349989571.b4-ty@b4/
Patch (1/7):
- Add Reviewed-by tag from Krzysztof Kozlowski;
Patch (3/7):
- New patch;
- Reference sound-card-common.yaml, drop custom model property;
Patch (4/7)(5/7):
- New patches;
- Support Forever Pi board with different DAI format;
Patch (6/7)(7/7):
- New patches;
- Implement headphone jack detection and DAPM routing for ATK-DL2K0300B
board.
Link to V1:
https://lore.kernel.org/all/cover.1773107475.git.zhoubinbin@loongson.cn/
Binbin Zhou (7):
ASoC: dt-bindings: loongson,ls2k1000-i2s: Document Loongson-2K0300
compatible
ASoC: loongson: Add Loongson-2K0300 I2S controller support
ASoC: dt-bindings: loongson,ls-audio-card: Use common sound card
ASoC: dt-bindings: loongson,ls-audio-card: Add ctcisz forever pi
compatible
ASoC: loongson: Add Loongson-2K0300 CTCISZ Forever Pi sound card
support
ASoC: dt-bindings: loongson,ls-audio-card: Add ATK-DL2K0300B
compatible
ASoC: loongson: Add headphone jack detection and DAPM routing
.../sound/loongson,ls-audio-card.yaml | 52 +++++-
.../bindings/sound/loongson,ls2k1000-i2s.yaml | 22 ++-
sound/soc/loongson/loongson_card.c | 163 +++++++++++++++++-
sound/soc/loongson/loongson_i2s_plat.c | 42 ++++-
4 files changed, 256 insertions(+), 23 deletions(-)
base-commit: b2a71527074f5e4d273a25f6c89fb159172b2877
--
2.52.0
next reply other threads:[~2026-06-04 2:11 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-04 2:11 Binbin Zhou [this message]
2026-06-04 2:11 ` [PATCH v2 1/7] ASoC: dt-bindings: loongson,ls2k1000-i2s: Document Loongson-2K0300 compatible Binbin Zhou
2026-06-04 2:11 ` [PATCH v2 2/7] ASoC: loongson: Add Loongson-2K0300 I2S controller support Binbin Zhou
2026-06-04 2:24 ` sashiko-bot
2026-06-04 2:11 ` [PATCH v2 3/7] ASoC: dt-bindings: loongson,ls-audio-card: Use common sound card Binbin Zhou
2026-06-04 2:11 ` [PATCH v2 4/7] ASoC: dt-bindings: loongson,ls-audio-card: Add ctcisz forever pi compatible Binbin Zhou
2026-06-04 2:21 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1780538113.git.zhoubinbin@loongson.cn \
--to=zhoubinbin@loongson.cn \
--cc=broonie@kernel.org \
--cc=chenhuacai@kernel.org \
--cc=chenhuacai@loongson.cn \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@xen0n.name \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-sound@vger.kernel.org \
--cc=loongarch@lists.linux.dev \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=tiwai@suse.com \
--cc=zhoubb.aaron@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox