devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Marijn Suijten <marijn.suijten@somainline.org>,
	phone-devel@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@somainline.org>,
	Konrad Dybcio <konrad.dybcio@somainline.org>,
	Martin Botka <martin.botka@somainline.org>,
	Jami Kettunen <jami.kettunen@somainline.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: sdm845-tama: Add volume up and camera GPIO keys
Date: Thu, 22 Dec 2022 20:18:29 +0100	[thread overview]
Message-ID: <d1e1b18c-0d17-2145-0fc2-3f9be8d68fe9@linaro.org> (raw)
In-Reply-To: <20221222190656.31664-1-marijn.suijten@somainline.org>



On 22.12.2022 20:06, Marijn Suijten wrote:
> Tama has four GPIO-wired keys: two for camera focus and shutter /
> snapshot, and two more for volume up and down.  As per the comment these
> used to not work because the necessary pin bias was missing, which is
> now set via pinctrl on pm8998_gpio(s).
> 
> The missing bias has also been added to the existing volume down button,
> which receives a node name and label cleanup at the same time to be more
> consistent with other DTS and the newly added buttons.  Its deprecated
> gpio-key,wakeup property has also been replaced with wakeup-source.
> 
> Note that volume up is also available through the usual PON RESIN node,
> but unlike other platforms only triggers when the power button is held
> down at the same time making it unsuitable to serve as KEY_VOLUMEUP.
Sounds rather intriguing..

> 
> Fixes: 30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  .../dts/qcom/sdm845-sony-xperia-tama.dtsi     | 72 +++++++++++++++++--
>  1 file changed, 68 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
> index 87dd0fc36747..6390dadd5f82 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
> @@ -4,6 +4,7 @@
>   */
>  
>  #include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>  #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>  #include "sdm845.dtsi"
>  #include "pm8005.dtsi"
> @@ -17,14 +18,43 @@ / {
>  	gpio-keys {
>  		compatible = "gpio-keys";
>  
> -		/* Neither Camera Focus, nor Camera Shutter seem to work... */
> +		pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
> +		pinctrl-names = "default";
>  
> -		key-vol-down {
> -			label = "volume_down";
> +		key-camera-focus {
> +			label = "Camera Focus";
> +			gpios = <&pm8998_gpio 2 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_CAMERA_FOCUS>;
> +			debounce-interval = <15>;
> +			linux,can-disable;
> +			wakeup-source;
> +		};
> +
> +		key-camera-snapshot {
> +			label = "Camera Snapshot";
> +			gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_CAMERA>;
> +			debounce-interval = <15>;
> +			linux,can-disable;
> +			wakeup-source;
> +		};
> +
> +		key-volume-down {
> +			label = "Volume Down";
>  			gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
>  			linux,code = <KEY_VOLUMEDOWN>;
>  			debounce-interval = <15>;
> -			gpio-key,wakeup;
> +			linux,can-disable;
> +			wakeup-source;
> +		};
> +
> +		key-volume-up {
> +			label = "Volume Up";
> +			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEUP>;
> +			debounce-interval = <15>;
> +			linux,can-disable;
> +			wakeup-source;
>  		};
>  	};
>  
> @@ -358,6 +388,40 @@ &i2c14 {
>  	/* AMS TCS3490 RGB+IR color sensor @ 72 */
>  };
>  
> +&pm8998_gpio {
> +	focus_n: focus-n-state {
> +		pins = "gpio2";
> +		function = PMIC_GPIO_FUNC_NORMAL;
> +		power-source = <0>;
> +		bias-pull-up;
> +		input-enable;
> +	};
> +
> +	vol_down_n: vol-down-n-state {
> +		pins = "gpio5";
> +		function = PMIC_GPIO_FUNC_NORMAL;
> +		power-source = <0>;
> +		bias-pull-up;
> +		input-enable;
> +	};
> +
> +	vol_up_n: vol-up-n-state {
> +		pins = "gpio6";
> +		function = PMIC_GPIO_FUNC_NORMAL;
> +		power-source = <0>;
> +		bias-pull-up;
> +		input-enable;
> +	};
> +
> +	snapshot_n: snapshot-n-state {
> +		pins = "gpio7";
> +		function = PMIC_GPIO_FUNC_NORMAL;
> +		power-source = <0>;
> +		bias-pull-up;
> +		input-enable;
> +	};
> +};
> +
>  &qupv3_id_0 {
>  	status = "okay";
>  };

      reply	other threads:[~2022-12-22 19:18 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-22 19:06 [PATCH] arm64: dts: qcom: sdm845-tama: Add volume up and camera GPIO keys Marijn Suijten
2022-12-22 19:18 ` Konrad Dybcio [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d1e1b18c-0d17-2145-0fc2-3f9be8d68fe9@linaro.org \
    --to=konrad.dybcio@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=angelogioacchino.delregno@somainline.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jami.kettunen@somainline.org \
    --cc=konrad.dybcio@somainline.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=martin.botka@somainline.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).