Re: [PATCH v3 7/8] watchdog: max77714: add driver for the watchdog in the MAX77714 PMIC

[Luca Ceresoli <luca@lucaceresoli.net>]

Hi Guenter, Krzysztof,

On 12/11/21 20:23, Guenter Roeck wrote:
> On 11/12/21 8:07 AM, Krzysztof Kozlowski wrote:
>> On 12/11/2021 17:02, Luca Ceresoli wrote:
>>> Hi Guenter,
>>>
>>> On 12/11/21 15:57, Guenter Roeck wrote:
>>>> On 11/11/21 2:58 PM, Luca Ceresoli wrote:
>>>>> Add a simple driver to support the watchdog embedded in the Maxim
>>>>> MAX77714
>>>>> PMIC.
>>>>>
>>>>> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
>>>>>
>>>>
>>>> I just realized that this is effectively a rewrite of
>>>> drivers/watchdog/max77620_wdt.c.
>>>> The only difference I can see is is the register offsets (0x91 and 0x92
>>>> vs. 1 and 2) and some implementation details. Please add support for
>>>> this
>>>> watchdog to the other driver or provide a _really_ good reason why that
>>>> is not possible.
>>>
>>> I initially started developing MAX77714 watchdog support as an addition
>>> to max77620_wdt.c as the procedures look identical at least for the
>>> basic features.
>>>
>>> But the register content seems completely different. Here are the notes
>>> I took at that time:
>>>
>>> -------------------------8<-------------------------
>>>
>>> MAX77620 has reg ONOFFCNFG1  at 0x41, ONOFFCNFG2  at 0x42.
>>> MAX77714 has reg CNFG1_ONOFF at 0x93, CNFG2_ONOFF at 0x94.
>>> OK, we can handle this with a register indirection table, indexed by
>>> chip model.
>>>
>>> MAX77620 has MAX77620_REG_FPS_CFG0 register.
>>> On MAX77714 I was unable to find any such register (I haven't looked at
>>> FPS in detail though).
>>> OK, we can handle this with some if()s or entirely disable PM on the
>>> 77714 until anybody cares.
>>>
>>> MAX77620 ONOFFCNFG1  has SFT_RST in bit 7.
>>> MAX77714 CNFG1_ONOFF has SFT_RST is bit 6.
>>> Uhm, should we have a _bit_ indirection table in addition to the
>>> _register_ indirection table?
>>>
>>> MAX77620 ONOFFCNFG2  bit 5 is SLP_LPM_MSK, involved in FPS.
>>> MAX77620 ONOFFCNFG2  bit 6 is WD_RTS_WK, configures the watchdog timer.
>>> MAX77714 CNFG2_ONOFF bit 5 is WD_RTS_WK, configures the watchdog timer.
>>> On MAX77714 I haven't found SLP_LPM_MSK.
>>>
>>> MAX77620 has 6 CID registers with "ES version" in CID5.
>>> MAX77714 has 5 CID registers with "DEVICE id" in CID3.
>>> CID registers would be useful to get the chip model directly from the
>>> chip, if only they had the same structure.
>>>
>>> Almost all of the registers I have been looking into have similar
>>> differences.
>>>
>>> -------------------------8<-------------------------
>>>
>>> When I started adding indirection tables the driver started growing
>>> bigger and uglier, and that little simple driver started being big and
>>> complex. So I opted to add a new driver.
>>>
>>
>> The register offset differences are trivial and we do it in several
>> drivers. Also in rtc-max77686 used by you here.
>> Lack of features as well - just have a variant/driver data which defines
>> certain features (true/false) or quirk bits (see s3c2410_wdt).
>>
>> The second driver - s3c2410_wdt - also customizes the bits.
>>
>> Therefore if the generic device operating configuration is similar (same
>> generic control flow) and differences are in bits and offsets, then it
>> should be one driver.
>>
> 
> Exactly.

Ok, I'll do that and send v4.

Now I realize I should have mentioned from the beginning the reasons for
creating a new driver, so this discussion would have been cleared much
earlier. Apologies for that.

Patches 1-6 + 8 are not impacted and will need no change for this issue.

-- 
Luca