Re: [PATCH v5 00/12] NXP DSPI bugfixes and support for LS1028A

[Michael Walle <michael@walle.cc>]

Am 2020-03-18 01:15, schrieb Vladimir Oltean:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
> 
> This series addresses a few issues that were missed during the previous
> series "[PATCH 00/12] TCFQ to XSPI migration for NXP DSPI driver", on
> SoCs other than LS1021A and LS1043A. DMA mode has been completely 
> broken
> by that series, and XSPI mode never worked on little-endian 
> controllers.
> 
> Then it introduces support for the LS1028A chip, whose compatible has
> recently been documented here:
> 
> https://lore.kernel.org/linux-devicetree/20200218171418.18297-1-michael@walle.cc/
> 
> The device tree for the LS1028A SoC is extended with DMA channels
> definition, such that even though the default operating mode is XSPI,
> one can simply change DSPI_XSPI_MODE to DSPI_DMA_MODE in the
> devtype_data structure of the driver and use that instead.
> 
> Compared to earlier v4, the only change is in patch 05/12 to fix a race
> condition signaled by Michael Walle here:
> https://lkml.org/lkml/2020/3/17/740
> 
> I don't expect the "fixes" patches to reach very far down the stable
> pipe, since there has been pretty heavy refactoring in this driver.
> 
> For testing, benchmarking and debugging, the mikroBUS connector on the
> LS1028A-RDB is made available via spidev.

Patches 1-11:
Tested-by: Michael Walle <michael@walle.cc>

Thanks Vladimir for the great work.

-michael

> 
> Vladimir Oltean (12):
>   spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR
>   spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA
>   spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode
>   spi: spi-fsl-dspi: Avoid reading more data than written in EOQ mode
>   spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight
>   spi: spi-fsl-dspi: Replace interruptible wait queue with a simple
>     completion
>   spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA
>     mode
>   spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code
>     path
>   spi: spi-fsl-dspi: Move invariant configs out of
>     dspi_transfer_one_message
>   spi: spi-fsl-dspi: Add support for LS1028A
>   arm64: dts: ls1028a: Specify the DMA channels for the DSPI 
> controllers
>   arm64: dts: ls1028a-rdb: Add a spidev node for the mikroBUS
> 
>  .../boot/dts/freescale/fsl-ls1028a-rdb.dts    |  14 +
>  .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi |   6 +
>  drivers/spi/spi-fsl-dspi.c                    | 324 +++++++++---------
>  3 files changed, 182 insertions(+), 162 deletions(-)