From: Mark Kettenis <mark.kettenis@xs4all.nl>
To: Hector Martin <marcan@marcan.st>
Cc: linux-arm-kernel@lists.infradead.org, marcan@marcan.st,
maz@kernel.org, robh+dt@kernel.org, arnd@kernel.org,
linus.walleij@linaro.org, alyssa@rosenzweig.io, krzk@kernel.org,
gregkh@linuxfoundation.org, p.zabel@pengutronix.de,
rafael@kernel.org, devicetree@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-serial@vger.kernel.org
Subject: Re: [PATCH 5/7] arm64: dts: apple: t8103: Add the UART PMGR tree
Date: Tue, 5 Oct 2021 22:25:24 +0200 (CEST) [thread overview]
Message-ID: <d3ca3c225d101c67@bloch.sibelius.xs4all.nl> (raw)
In-Reply-To: <20211005155923.173399-6-marcan@marcan.st> (message from Hector Martin on Wed, 6 Oct 2021 00:59:21 +0900)
> From: Hector Martin <marcan@marcan.st>
> Date: Wed, 6 Oct 2021 00:59:21 +0900
> Content-Type: text/plain; charset="us-ascii"
>
> Note that the UART driver does not currently support runtime-pm, so this
> effectively always keeps the UART0 device on. However, this does clockgate
> all the other UARTs, as those are not currently instantiated.
>
> Signed-off-by: Hector Martin <marcan@marcan.st>
> ---
> arch/arm64/boot/dts/apple/t8103.dtsi | 116 +++++++++++++++++++++++++++
> 1 file changed, 116 insertions(+)
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
> diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
> index 9f60f9e48ea0..63056ddc7ef7 100644
> --- a/arch/arm64/boot/dts/apple/t8103.dtsi
> +++ b/arch/arm64/boot/dts/apple/t8103.dtsi
> @@ -122,6 +122,7 @@ serial0: serial@235200000 {
> */
> clocks = <&clkref>, <&clkref>;
> clock-names = "uart", "clk_uart_baud0";
> + power-domains = <&ps_uart0>;
> status = "disabled";
> };
>
> @@ -131,5 +132,120 @@ aic: interrupt-controller@23b100000 {
> interrupt-controller;
> reg = <0x2 0x3b100000 0x0 0x8000>;
> };
> +
> + pmgr: power-management@23b700000 {
> + compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reg = <0x2 0x3b700000 0x0 0x14000>;
> +
> + ps_sio_busif: power-controller@1c0 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x1c0>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "sio_busif";
> + };
> +
> + ps_sio: power-controller@1c8 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x1c8>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "sio";
> + power-domains = <&ps_sio_busif>;
> + };
> +
> + ps_uart_p: power-controller@220 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x220>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart_p";
> + power-domains = <&ps_sio>;
> + };
> +
> + ps_uart0: power-controller@270 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x270>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart0";
> + power-domains = <&ps_uart_p>;
> + };
> +
> + ps_uart1: power-controller@278 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x278>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart1";
> + power-domains = <&ps_uart_p>;
> + };
> +
> + ps_uart2: power-controller@280 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x280>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart2";
> + power-domains = <&ps_uart_p>;
> + };
> +
> + ps_uart3: power-controller@288 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x288>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart3";
> + power-domains = <&ps_uart_p>;
> + };
> +
> + ps_uart4: power-controller@290 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x290>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart4";
> + power-domains = <&ps_uart_p>;
> + };
> +
> + ps_uart5: power-controller@298 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x298>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart5";
> + power-domains = <&ps_uart_p>;
> + };
> +
> + ps_uart6: power-controller@2a0 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x2a0>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart6";
> + power-domains = <&ps_uart_p>;
> + };
> +
> + ps_uart7: power-controller@2a8 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x2a8>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart7";
> + power-domains = <&ps_uart_p>;
> + };
> +
> + ps_uart8: power-controller@2b0 {
> + compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
> + reg = <0x2b0>;
> + #power-domain-cells = <0>;
> + #reset-cells = <0>;
> + apple,domain-name = "uart8";
> + power-domains = <&ps_uart_p>;
> + };
> + };
> };
> };
> --
> 2.33.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
next prev parent reply other threads:[~2021-10-05 20:25 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-05 15:59 [PATCH 0/7] Apple SoC PMGR device power states driver Hector Martin
2021-10-05 15:59 ` [PATCH 1/7] dt-bindings: arm: apple: Add apple,pmgr binding Hector Martin
2021-10-05 20:09 ` Mark Kettenis
2021-10-05 22:45 ` Rob Herring
2021-10-06 15:17 ` Hector Martin
2021-10-06 6:56 ` Krzysztof Kozlowski
2021-10-06 7:30 ` Krzysztof Kozlowski
2021-10-06 15:21 ` Hector Martin
2021-10-06 15:26 ` Hector Martin
2021-10-07 13:10 ` Krzysztof Kozlowski
2021-10-05 15:59 ` [PATCH 2/7] dt-bindings: power: Add apple,pmgr-pwrstate binding Hector Martin
2021-10-05 20:16 ` Mark Kettenis
2021-10-06 15:27 ` Hector Martin
2021-10-06 0:58 ` Rob Herring
2021-10-06 15:52 ` Hector Martin
2021-10-06 15:55 ` Hector Martin
2021-10-08 7:50 ` Krzysztof Kozlowski
2021-10-11 5:17 ` Hector Martin
2021-10-06 7:05 ` Krzysztof Kozlowski
2021-10-06 15:59 ` Hector Martin
2021-10-07 13:12 ` Krzysztof Kozlowski
2021-10-11 4:42 ` Hector Martin
2021-10-05 15:59 ` [PATCH 3/7] soc: apple: Add driver for Apple PMGR power state controls Hector Martin
2021-10-05 16:08 ` Linus Walleij
2021-10-05 16:15 ` Hector Martin
2021-10-05 19:49 ` Linus Walleij
2021-10-05 20:21 ` Mark Kettenis
2021-10-06 16:00 ` Hector Martin
2021-10-06 7:28 ` Krzysztof Kozlowski
2021-10-06 16:08 ` Hector Martin
2021-10-06 9:24 ` Philipp Zabel
2021-10-06 16:11 ` Hector Martin
2021-10-05 15:59 ` [PATCH 4/7] arm64: dts: apple: t8103: Rename clk24 to clkref Hector Martin
2021-10-05 20:22 ` Mark Kettenis
2021-10-05 15:59 ` [PATCH 5/7] arm64: dts: apple: t8103: Add the UART PMGR tree Hector Martin
2021-10-05 20:25 ` Mark Kettenis [this message]
2021-10-05 15:59 ` [PATCH 6/7] tty: serial: samsung_tty: Support runtime PM Hector Martin
2021-10-06 7:43 ` Krzysztof Kozlowski
2021-10-06 13:25 ` Rafael J. Wysocki
2021-10-06 13:29 ` Krzysztof Kozlowski
2021-10-11 5:32 ` Hector Martin
2021-10-11 6:48 ` Krzysztof Kozlowski
2021-10-11 8:27 ` Johan Hovold
2021-10-05 15:59 ` [PATCH 7/7] arm64: dts: apple: t8103: Add UART2 Hector Martin
2021-10-05 20:26 ` Mark Kettenis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d3ca3c225d101c67@bloch.sibelius.xs4all.nl \
--to=mark.kettenis@xs4all.nl \
--cc=alyssa@rosenzweig.io \
--cc=arnd@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=marcan@marcan.st \
--cc=maz@kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).