Re: [PATCH v3 1/3] clk: vc5: Add structure to describe particular chip features

[Marek Vasut <marek.vasut@gmail.com>]

On 04/06/2017 11:15 AM, Alexey Firago wrote:
> Introduce vc5_chip_info structure to describe features of a particular
> VC5 chip (id, number of FODs, number of outputs, flags).
> For now flags are only used to indicate if chip has internal XTAL.
> vc5_chip_info is set on probe from the matched of_device_id->data.
> 
> Also add defines to specify maximum number of FODs and clock outputs
> supported by the driver.
> 
> With these changes it should be easier to extend driver to support
> more VC5 models.
> 
> Signed-off-by: Alexey Firago <alexey_firago@mentor.com>

Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

> ---
>  drivers/clk/clk-versaclock5.c | 65 +++++++++++++++++++++++++++++++------------
>  1 file changed, 47 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
> index 56741f3..4e81fb1 100644
> --- a/drivers/clk/clk-versaclock5.c
> +++ b/drivers/clk/clk-versaclock5.c
> @@ -113,12 +113,30 @@
>  #define VC5_MUX_IN_XIN		BIT(0)
>  #define VC5_MUX_IN_CLKIN	BIT(1)
>  
> +/* Maximum number of clk_out supported by this driver */
> +#define VC5_MAX_CLK_OUT_NUM	3
> +
> +/* Maximum number of FODs supported by this driver */
> +#define VC5_MAX_FOD_NUM	2
> +
> +/* flags to describe chip features */
> +/* chip has built-in oscilator */
> +#define VC5_HAS_INTERNAL_XTAL	BIT(0)
> +
>  /* Supported IDT VC5 models. */
>  enum vc5_model {
>  	IDT_VC5_5P49V5923,
>  	IDT_VC5_5P49V5933,
>  };
>  
> +/* Structure to describe features of a particular VC5 model */
> +struct vc5_chip_info {
> +	const enum vc5_model	model;
> +	const unsigned int	clk_fod_cnt;
> +	const unsigned int	clk_out_cnt;
> +	u32			flags;

Shouldn't this also be const ?

> +};

[...]

-- 
Best regards,
Marek Vasut