Re: [PATCH v2 5/7] PCI: qcom: Add SM8150 SoC support

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

On 01/03/2022 10:25, Bhupesh Sharma wrote:
> The PCIe IP (rev 1.5.0) on SM8150 SoC is similar to the one used on
> SM8250. Hence the support is added reusing the members of ops_2_7_0.
> 
> Cc: Vinod Koul <vkoul@kernel.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
>   drivers/pci/controller/dwc/pcie-qcom.c | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index c19cd506ed3f..66fbc0234888 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1487,6 +1487,17 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
>   	.config_sid = qcom_pcie_config_sid_sm8250,
>   };
>   
> +/* Qcom IP rev.: 1.5.0 */
> +static const struct qcom_pcie_ops ops_1_5_0 = {
> +	.get_resources = qcom_pcie_get_resources_2_7_0,
> +	.init = qcom_pcie_init_2_7_0,
> +	.deinit = qcom_pcie_deinit_2_7_0,
> +	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> +	.post_init = qcom_pcie_post_init_2_7_0,
> +	.post_deinit = qcom_pcie_post_deinit_2_7_0,
> +	.config_sid = qcom_pcie_config_sid_sm8250,
> +};
> +

This duplicates the ops_1_9_0, doesn't it?
I'd suggest to reuse 1.9.0 structure and add a comment that it's also 
used for 1.5.0.

>   static const struct qcom_pcie_cfg apq8084_cfg = {
>   	.ops = &ops_1_0_0,
>   };
> @@ -1511,6 +1522,10 @@ static const struct qcom_pcie_cfg sdm845_cfg = {
>   	.ops = &ops_2_7_0,
>   };
>   
> +static const struct qcom_pcie_cfg sm8150_cfg = {
> +	.ops = &ops_1_5_0,
> +};
> +
>   static const struct qcom_pcie_cfg sm8250_cfg = {
>   	.ops = &ops_1_9_0,
>   };
> @@ -1626,6 +1641,7 @@ static const struct of_device_id qcom_pcie_match[] = {
>   	{ .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg },
>   	{ .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg },
>   	{ .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
> +	{ .compatible = "qcom,pcie-sm8150", .data = &sm8150_cfg },
>   	{ .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
>   	{ .compatible = "qcom,pcie-sc8180x", .data = &sm8250_cfg },
>   	{ .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },


-- 
With best wishes
Dmitry