From: Paolo Abeni <pabeni@redhat.com>
To: Lukasz Majewski <lukma@denx.de>,
Andrew Lunn <andrew+netdev@lunn.ch>,
davem@davemloft.net, Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Richard Cochran <richardcochran@gmail.com>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
Stefan Wahren <wahrenst@gmx.net>, Simon Horman <horms@kernel.org>
Subject: Re: [net-next v14 07/12] net: mtip: Add mtip_switch_{rx|tx} functions to the L2 switch driver
Date: Tue, 8 Jul 2025 11:52:00 +0200 [thread overview]
Message-ID: <d51a84c7-d534-44cc-88bc-73db8721e50e@redhat.com> (raw)
In-Reply-To: <20250701114957.2492486-8-lukma@denx.de>
On 7/1/25 1:49 PM, Lukasz Majewski wrote:
> diff --git a/drivers/net/ethernet/freescale/mtipsw/mtipl2sw.c b/drivers/net/ethernet/freescale/mtipsw/mtipl2sw.c
> index 63afdf2beea6..b5a82748b39b 100644
> --- a/drivers/net/ethernet/freescale/mtipsw/mtipl2sw.c
> +++ b/drivers/net/ethernet/freescale/mtipsw/mtipl2sw.c
> @@ -228,6 +228,39 @@ struct mtip_port_info *mtip_portinfofifo_read(struct switch_enet_private *fep)
> return info;
> }
>
> +static void mtip_atable_get_entry_port_number(struct switch_enet_private *fep,
> + unsigned char *mac_addr, u8 *port)
> +{
> + int block_index, block_index_end, entry;
> + u32 mac_addr_lo, mac_addr_hi;
> + u32 read_lo, read_hi;
> +
> + mac_addr_lo = (u32)((mac_addr[3] << 24) | (mac_addr[2] << 16) |
> + (mac_addr[1] << 8) | mac_addr[0]);
> + mac_addr_hi = (u32)((mac_addr[5] << 8) | (mac_addr[4]));
> +
> + block_index = GET_BLOCK_PTR(crc8_calc(mac_addr));
> + block_index_end = block_index + ATABLE_ENTRY_PER_SLOT;
> +
> + /* now search all the entries in the selected block */
> + for (entry = block_index; entry < block_index_end; entry++) {
> + mtip_read_atable(fep, entry, &read_lo, &read_hi);
> + *port = MTIP_PORT_FORWARDING_INIT;
> +
> + if (read_lo == mac_addr_lo &&
> + ((read_hi & 0x0000FFFF) ==
> + (mac_addr_hi & 0x0000FFFF))) {
> + /* found the correct address */
> + if ((read_hi & (1 << 16)) && (!(read_hi & (1 << 17))))
> + *port = FIELD_GET(AT_PORT_MASK, read_hi);
> + break;
> + }
> + }
> +
> + dev_dbg(&fep->pdev->dev, "%s: MAC: %pM PORT: 0x%x\n", __func__,
> + mac_addr, *port);
> +}
> +
> /* Clear complete MAC Look Up Table */
> void mtip_clear_atable(struct switch_enet_private *fep)
> {
> @@ -825,11 +858,217 @@ static irqreturn_t mtip_interrupt(int irq, void *ptr_fep)
>
> static void mtip_switch_tx(struct net_device *dev)
> {
> + struct mtip_ndev_priv *priv = netdev_priv(dev);
> + struct switch_enet_private *fep = priv->fep;
> + unsigned short status;
> + struct sk_buff *skb;
> + struct cbd_t *bdp;
> +
> + spin_lock(&fep->hw_lock);
> + bdp = fep->dirty_tx;
> +
> + while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
> + if (bdp == fep->cur_tx && fep->tx_full == 0)
> + break;
> +
> + dma_unmap_single(&fep->pdev->dev, bdp->cbd_bufaddr,
> + MTIP_SWITCH_TX_FRSIZE, DMA_TO_DEVICE);
> + bdp->cbd_bufaddr = 0;
> + skb = fep->tx_skbuff[fep->skb_dirty];
> + /* Check for errors */
> + if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
> + BD_ENET_TX_RL | BD_ENET_TX_UN |
> + BD_ENET_TX_CSL)) {
> + dev->stats.tx_errors++;
> + if (status & BD_ENET_TX_HB) /* No heartbeat */
> + dev->stats.tx_heartbeat_errors++;
> + if (status & BD_ENET_TX_LC) /* Late collision */
> + dev->stats.tx_window_errors++;
> + if (status & BD_ENET_TX_RL) /* Retrans limit */
> + dev->stats.tx_aborted_errors++;
> + if (status & BD_ENET_TX_UN) /* Underrun */
> + dev->stats.tx_fifo_errors++;
> + if (status & BD_ENET_TX_CSL) /* Carrier lost */
> + dev->stats.tx_carrier_errors++;
> + } else {
> + dev->stats.tx_packets++;
> + }
> +
> + if (status & BD_ENET_TX_READY)
> + dev_err(&fep->pdev->dev,
> + "Enet xmit interrupt and TX_READY.\n");
> +
> + /* Deferred means some collisions occurred during transmit,
> + * but we eventually sent the packet OK.
> + */
> + if (status & BD_ENET_TX_DEF)
> + dev->stats.collisions++;
> +
> + /* Free the sk buffer associated with this last transmit */
> + dev_consume_skb_irq(skb);
> + fep->tx_skbuff[fep->skb_dirty] = NULL;
> + fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
> +
> + /* Update pointer to next buffer descriptor to be transmitted */
> + if (status & BD_ENET_TX_WRAP)
> + bdp = fep->tx_bd_base;
> + else
> + bdp++;
> +
> + /* Since we have freed up a buffer, the ring is no longer
> + * full.
> + */
> + if (fep->tx_full) {
> + fep->tx_full = 0;
> + if (netif_queue_stopped(dev))
> + netif_wake_queue(dev);
> + }
> + }
> + fep->dirty_tx = bdp;
> + spin_unlock(&fep->hw_lock);
> }
>
> +/* During a receive, the cur_rx points to the current incoming buffer.
> + * When we update through the ring, if the next incoming buffer has
> + * not been given to the system, we just set the empty indicator,
> + * effectively tossing the packet.
> + */
> static int mtip_switch_rx(struct net_device *dev, int budget, int *port)
> {
> - return -ENOMEM;
> + struct mtip_ndev_priv *priv = netdev_priv(dev);
> + u8 *data, rx_port = MTIP_PORT_FORWARDING_INIT;
> + struct switch_enet_private *fep = priv->fep;
> + unsigned short status, pkt_len;
> + struct net_device *pndev;
> + struct ethhdr *eth_hdr;
> + int pkt_received = 0;
> + struct sk_buff *skb;
> + struct cbd_t *bdp;
> + struct page *page;
> +
> + /* First, grab all of the stats for the incoming packet.
> + * These get messed up if we get called due to a busy condition.
> + */
> + bdp = fep->cur_rx;
> +
> + while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
> + if (pkt_received >= budget)
> + break;
> +
> + pkt_received++;
> +
> + if (!fep->usage_count)
> + goto rx_processing_done;
> +
> + status ^= BD_ENET_RX_LAST;
> + /* Check for errors. */
> + if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
> + BD_ENET_RX_CR | BD_ENET_RX_OV | BD_ENET_RX_LAST |
> + BD_ENET_RX_CL)) {
> + dev->stats.rx_errors++;
> + if (status & BD_ENET_RX_OV) {
> + /* FIFO overrun */
> + dev->stats.rx_fifo_errors++;
> + goto rx_processing_done;
> + }
> + if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH
> + | BD_ENET_RX_LAST)) {
> + /* Frame too long or too short. */
> + dev->stats.rx_length_errors++;
> + if (status & BD_ENET_RX_LAST)
> + netdev_err(dev, "rcv is not +last\n");
> + }
> + if (status & BD_ENET_RX_CR) /* CRC Error */
> + dev->stats.rx_crc_errors++;
> +
> + /* Report late collisions as a frame error. */
> + if (status & (BD_ENET_RX_NO | BD_ENET_RX_CL))
> + dev->stats.rx_frame_errors++;
> + goto rx_processing_done;
> + }
> +
> + /* Get correct RX page */
> + page = fep->page[bdp - fep->rx_bd_base];
> + /* Process the incoming frame */
> + pkt_len = bdp->cbd_datlen;
> + data = (__u8 *)__va(bdp->cbd_bufaddr);
> +
> + dma_sync_single_for_cpu(&fep->pdev->dev, bdp->cbd_bufaddr,
> + pkt_len, DMA_FROM_DEVICE);
> + net_prefetch(page_address(page));
Both `__va(bdp->cbd_bufaddr)` and `page_address(page)` should point to
the same same memory. Please use constantly one _or_ the other - likely
page_address(page) is the best option.
> +
> + if (fep->quirks & FEC_QUIRK_SWAP_FRAME)
> + swap_buffer(data, pkt_len);
> +
> + if (data) {
The above check is not needed. If data is null swap_buffer will still
unconditionally dereference it.
Also it looks like it can't be NULL.
/P
next prev parent reply other threads:[~2025-07-08 9:52 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-01 11:49 [net-next v14 00/12] net: mtip: Add support for MTIP imx287 L2 switch driver Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 01/12] dt-bindings: net: Add MTIP L2 switch description Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 02/12] ARM: dts: nxp: mxs: Adjust the imx28.dtsi " Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 03/12] ARM: dts: nxp: mxs: Adjust XEA board's DTS to support L2 switch Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 04/12] net: mtip: The L2 switch driver for imx287 Lukasz Majewski
2025-07-08 10:06 ` Paolo Abeni
2025-07-09 10:14 ` Lukasz Majewski
2025-07-08 11:10 ` Paolo Abeni
2025-07-09 11:16 ` Lukasz Majewski
2025-07-10 21:04 ` Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 05/12] net: mtip: Add buffers management functions to the L2 switch driver Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 06/12] net: mtip: Add net_device_ops " Lukasz Majewski
2025-07-08 10:03 ` Paolo Abeni
2025-07-09 10:08 ` Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 07/12] net: mtip: Add mtip_switch_{rx|tx} " Lukasz Majewski
2025-07-08 9:52 ` Paolo Abeni [this message]
2025-07-09 9:18 ` Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 08/12] net: mtip: Extend the L2 switch driver with management operations Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 09/12] net: mtip: Extend the L2 switch driver for imx287 with bridge operations Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 10/12] ARM: mxs_defconfig: Enable CONFIG_NFS_FSCACHE Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 11/12] ARM: mxs_defconfig: Update mxs_defconfig to 6.16-rc1 Lukasz Majewski
2025-07-01 11:49 ` [net-next v14 12/12] ARM: mxs_defconfig: Enable CONFIG_FEC_MTIP_L2SW to support MTIP L2 switch Lukasz Majewski
2025-07-08 6:30 ` [net-next v14 00/12] net: mtip: Add support for MTIP imx287 L2 switch driver Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d51a84c7-d534-44cc-88bc-73db8721e50e@redhat.com \
--to=pabeni@redhat.com \
--cc=andrew+netdev@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=festevam@gmail.com \
--cc=horms@kernel.org \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukma@denx.de \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=wahrenst@gmx.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).