Re: [PATCH V4] arm64: dts: add support for C3 based Amlogic AW409

["xianwei.zhao" <xianwei.zhao@amlogic.com>]

Hi Neil,
      Thank you for your reply.

On 2023/5/11 16:39, Neil Armstrong wrote:
> [ EXTERNAL EMAIL ]
> 
> Hi,
> 
> On 10/05/2023 11:11, Xianwei Zhao wrote:
>> Amlogic C3 is an advanced edge AI processor designed for smart IP camera
>> applications.
>>
>> Add basic support for the C3 based Amlogic AW409 board, which describes
>> the following components: CPU, GIC, IRQ, Timer, UART. It's capable of
>> booting up into the serial console.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
>> ---
>> Link: 
>> https://lore.kernel.org/all/20230407102704.1055152-1-kelvin.zhang@amlogic.com
>> Link: 
>> https://lore.kernel.org/all/20230307222651.2106615-2-martin.blumenstingl@googlemail.com
>>
>> V3 -> V4: Move Link under the --- before the changelog.
>> V2 -> V3: Remove '256m' from filename;
>>            Keep alphabetical order of Makefile.
>> V1 -> V2: Remove new arch, and use ARCH_MESON;
>>            Modify node name, and delete superfluous blank line.
>> ---
>>   arch/arm64/boot/dts/amlogic/Makefile          |  1 +
>>   .../dts/amlogic/amlogic-c3-c302x-aw409.dts    | 29 +++++++
>>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi   | 86 +++++++++++++++++++
>>   3 files changed, 116 insertions(+)
>>   create mode 100644 
>> arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>>   create mode 100644 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile 
>> b/arch/arm64/boot/dts/amlogic/Makefile
>> index cd1c5b04890a..6f61798a109f 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -1,4 +1,5 @@
>>   # SPDX-License-Identifier: GPL-2.0
>> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts 
>> b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>> new file mode 100644
>> index 000000000000..edce8850b338
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
>> @@ -0,0 +1,29 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "amlogic-c3.dtsi"
>> +
>> +/ {
>> +     model = "Amlogic C302 aw409 Development Board";
>> +     compatible = "amlogic,aw409", "amlogic,c3";
>> +     interrupt-parent = <&gic>;
>> +     #address-cells = <2>;
>> +     #size-cells = <2>;
>> +
>> +     aliases {
>> +             serial0 = &uart_b;
>> +     };
>> +
>> +     memory@0 {
>> +             device_type = "memory";
>> +             reg = <0x0 0x0 0x0 0x10000000>;
>> +     };
>> +};
>> +
>> +&uart_b {
>> +     status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi 
>> b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> new file mode 100644
>> index 000000000000..93b335aef605
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
>> @@ -0,0 +1,86 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +
>> +/ {
>> +     cpus {
>> +             #address-cells = <2>;
>> +             #size-cells = <0>;
>> +
>> +             cpu0: cpu@0 {
>> +                     device_type = "cpu";
>> +                     compatible = "arm,cortex-a35";
>> +                     reg = <0x0 0x0>;
>> +                     enable-method = "psci";
>> +             };
>> +
>> +             cpu1: cpu@1 {
>> +                     device_type = "cpu";
>> +                     compatible = "arm,cortex-a35";
>> +                     reg = <0x0 0x1>;
>> +                     enable-method = "psci";
>> +             };
>> +     };
>> +
>> +     timer {
>> +             compatible = "arm,armv8-timer";
>> +             interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | 
>> IRQ_TYPE_LEVEL_LOW)>;
>> +     };
>> +
>> +     psci {
>> +             compatible = "arm,psci-1.0";
>> +             method = "smc";
>> +     };
>> +
>> +     xtal: xtal-clk {
>> +             compatible = "fixed-clock";
>> +             clock-frequency = <24000000>;
>> +             clock-output-names = "xtal";
>> +             #clock-cells = <0>;
>> +     };
>> +
>> +     soc {
>> +             compatible = "simple-bus";
>> +             #address-cells = <2>;
>> +             #size-cells = <2>;
>> +             ranges;
>> +
>> +             gic: interrupt-controller@fff01000 {
>> +                     compatible = "arm,gic-400";
>> +                     #interrupt-cells = <3>;
>> +                     #address-cells = <0>;
>> +                     interrupt-controller;
>> +                     reg = <0x0 0xfff01000 0 0x1000>,
>> +                           <0x0 0xfff02000 0 0x2000>,
>> +                           <0x0 0xfff04000 0 0x2000>,
>> +                           <0x0 0xfff06000 0 0x2000>;
>> +                     interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) 
>> | IRQ_TYPE_LEVEL_HIGH)>;
>> +             };
>> +
>> +             apb4: bus@fe000000 {
>> +                     compatible = "simple-bus";
>> +                     reg = <0x0 0xfe000000 0x0 0x480000>;
>> +                     #address-cells = <2>;
>> +                     #size-cells = <2>;
>> +                     ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
>> +
>> +                     uart_b: serial@7a000 {
>> +                             compatible = "amlogic,meson-g12a-uart";
> 
> This should be:
> 
>         compatible = "amlogic,meson-g12a-uart", "amlogic,meson-gx-uart"
> 
> to match the amlogic,meson-uart.yaml bindings.
> 

I will use strings 'amlogic,meson-s4-uart' instead of these, because of 
board C3 is only use 12M clock source for serial, the same as s4 series.

> Please run :
> make CHECK_DTBS=1 amlogic/amlogic-c3-c302x-aw409.dtb
> 
> With that fixed, please add on v5:

Will do.

> 
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> 
>> +                             reg = <0x0 0x7a000 0x0 0x18>;
>> +                             interrupts = <GIC_SPI 169 
>> IRQ_TYPE_EDGE_RISING>;
>> +                             status = "disabled";
>> +                             clocks = <&xtal>, <&xtal>, <&xtal>;
>> +                             clock-names = "xtal", "pclk", "baud";
>> +                     };
>> +
>> +             };
>> +     };
>> +};
>>
>> base-commit: ae68fb187b59bc8645974320808ab2d7c41b1833
>