* [PATCH v1 4/4] ASoC: dt-bindings: simple-card: create jack for aux_devs [not found] <20230118125226.333214-1-astrid.rost@axis.com> @ 2023-01-18 12:52 ` Astrid Rost 2023-01-19 11:18 ` Krzysztof Kozlowski 2023-01-19 16:17 ` Rob Herring 0 siblings, 2 replies; 4+ messages in thread From: Astrid Rost @ 2023-01-18 12:52 UTC (permalink / raw) To: Mark Brown, Liam Girdwood, Krzysztof Kozlowski, Rob Herring, Kuninori Morimoto Cc: kernel, alsa-devel, linux-kernel, Astrid Rost, devicetree Add simple-card,aux-jack-types: Array of snd_jack_type to create jack-input-event for jack devices in aux-devs. If the setting is 0, the supported type of the device is used. A device which has the functions set_jack and get_jack_supported_type counts as jack device. Signed-off-by: Astrid Rost <astrid.rost@axis.com> --- .../bindings/sound/simple-card.yaml | 35 +++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml index ed19899bc94b..2635b1c04fc9 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.yaml +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml @@ -199,6 +199,13 @@ properties: maxItems: 1 simple-audio-card,mic-det-gpio: maxItems: 1 + simple-audio-card,aux-jack-types: + $ref: "/schemas/types.yaml#/definitions/uint32-array" + description: | + Array of snd_jack_type to create jack-input-event for jack + devices in aux-devs. If the setting is 0, the supported + type of the device is used. A device which has the functions + set_jack and get_jack_supported_type counts as jack device. patternProperties: "^simple-audio-card,cpu(@[0-9a-f]+)?$": @@ -498,3 +505,31 @@ examples: }; }; }; +#-------------------- +# Add a headphone and a headset mic jack, +# which use an auxiliary jack detector e.g. via i2c. +# The events, which should be enabled are: +# SND_JACK_HEADPHONE = 1 +# SND_JACK_MICROPHONE = 2 +#-------------------- + - | + sound { + compatible = "simple-audio-card"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Headset Mic", "Headset Mic Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLEFT", + "Headphone Jack", "HPRIGHT", + "LEFTIN", "Headset Mic", + "RIGHTIN", "Headset Mic"; + simple-audio-card,aux-devs = <&hp_jack>, <&hs_mic_jack>; + simple-audio-card,aux-jack-types = <1 2>; + simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clocks>; + }; + }; -- 2.30.2 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v1 4/4] ASoC: dt-bindings: simple-card: create jack for aux_devs 2023-01-18 12:52 ` [PATCH v1 4/4] ASoC: dt-bindings: simple-card: create jack for aux_devs Astrid Rost @ 2023-01-19 11:18 ` Krzysztof Kozlowski 2023-01-19 16:00 ` Astrid Rost 2023-01-19 16:17 ` Rob Herring 1 sibling, 1 reply; 4+ messages in thread From: Krzysztof Kozlowski @ 2023-01-19 11:18 UTC (permalink / raw) To: Astrid Rost, Mark Brown, Liam Girdwood, Krzysztof Kozlowski, Rob Herring, Kuninori Morimoto Cc: kernel, alsa-devel, linux-kernel, devicetree On 18/01/2023 13:52, Astrid Rost wrote: > Add simple-card,aux-jack-types: > Array of snd_jack_type to create jack-input-event for jack devices in > aux-devs. If the setting is 0, the supported type of the device is used. > A device which has the functions set_jack and get_jack_supported_type > counts as jack device. How a device can have "set_jack"? Isn't this part of code? Are you sure you describe here hardware, not Linux driver behavior? > > Signed-off-by: Astrid Rost <astrid.rost@axis.com> > --- > .../bindings/sound/simple-card.yaml | 35 +++++++++++++++++++ > 1 file changed, 35 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml > index ed19899bc94b..2635b1c04fc9 100644 > --- a/Documentation/devicetree/bindings/sound/simple-card.yaml > +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml > @@ -199,6 +199,13 @@ properties: > maxItems: 1 > simple-audio-card,mic-det-gpio: > maxItems: 1 > + simple-audio-card,aux-jack-types: > + $ref: "/schemas/types.yaml#/definitions/uint32-array" Drop quotes. > + description: | > + Array of snd_jack_type to create jack-input-event for jack > + devices in aux-devs. If the setting is 0, the supported > + type of the device is used. A device which has the functions > + set_jack and get_jack_supported_type counts as jack device. Same problems. Additionally, if this is a type of aux-dev, then maybe it should be just added as argument to aux-dev? > > patternProperties: > "^simple-audio-card,cpu(@[0-9a-f]+)?$": > @@ -498,3 +505,31 @@ examples: > }; > }; > }; > +#-------------------- > +# Add a headphone and a headset mic jack, > +# which use an auxiliary jack detector e.g. via i2c. > +# The events, which should be enabled are: > +# SND_JACK_HEADPHONE = 1 > +# SND_JACK_MICROPHONE = 2 > +#-------------------- No new examples, integrate it into some existing one. > + sound { > + compatible = "simple-audio-card"; > + simple-audio-card,widgets = > + "Headphone", "Headphone Jack", > + "Headset Mic", "Headset Mic Jack"; > + simple-audio-card,routing = > + "Headphone Jack", "HPLEFT", > + "Headphone Jack", "HPRIGHT", > + "LEFTIN", "Headset Mic", > + "RIGHTIN", "Headset Mic"; > + simple-audio-card,aux-devs = <&hp_jack>, <&hs_mic_jack>; > + simple-audio-card,aux-jack-types = <1 2>; > + simple-audio-card,cpu { > + sound-dai = <&ssi2>; > + }; > + simple-audio-card,codec { > + sound-dai = <&codec>; > + clocks = <&clocks>; > + }; > + }; Best regards, Krzysztof ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1 4/4] ASoC: dt-bindings: simple-card: create jack for aux_devs 2023-01-19 11:18 ` Krzysztof Kozlowski @ 2023-01-19 16:00 ` Astrid Rost 0 siblings, 0 replies; 4+ messages in thread From: Astrid Rost @ 2023-01-19 16:00 UTC (permalink / raw) To: Krzysztof Kozlowski, Astrid Rost, Mark Brown, Liam Girdwood, Krzysztof Kozlowski, Rob Herring, Kuninori Morimoto Cc: kernel, alsa-devel, linux-kernel, devicetree Hello, Thank you! Yes this makes things much easier. I will fix it. Astrid On 1/19/23 12:18, Krzysztof Kozlowski wrote: > On 18/01/2023 13:52, Astrid Rost wrote: >> Add simple-card,aux-jack-types: >> Array of snd_jack_type to create jack-input-event for jack devices in >> aux-devs. If the setting is 0, the supported type of the device is used. >> A device which has the functions set_jack and get_jack_supported_type >> counts as jack device. > > How a device can have "set_jack"? Isn't this part of code? Are you sure > you describe here hardware, not Linux driver behavior? > >> >> Signed-off-by: Astrid Rost <astrid.rost@axis.com> >> --- >> .../bindings/sound/simple-card.yaml | 35 +++++++++++++++++++ >> 1 file changed, 35 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml >> index ed19899bc94b..2635b1c04fc9 100644 >> --- a/Documentation/devicetree/bindings/sound/simple-card.yaml >> +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml >> @@ -199,6 +199,13 @@ properties: >> maxItems: 1 >> simple-audio-card,mic-det-gpio: >> maxItems: 1 >> + simple-audio-card,aux-jack-types: >> + $ref: "/schemas/types.yaml#/definitions/uint32-array" > > Drop quotes. > >> + description: | >> + Array of snd_jack_type to create jack-input-event for jack >> + devices in aux-devs. If the setting is 0, the supported >> + type of the device is used. A device which has the functions >> + set_jack and get_jack_supported_type counts as jack device. > > Same problems. > > Additionally, if this is a type of aux-dev, then maybe it should be just > added as argument to aux-dev? > >> >> patternProperties: >> "^simple-audio-card,cpu(@[0-9a-f]+)?$": >> @@ -498,3 +505,31 @@ examples: >> }; >> }; >> }; >> +#-------------------- >> +# Add a headphone and a headset mic jack, >> +# which use an auxiliary jack detector e.g. via i2c. >> +# The events, which should be enabled are: >> +# SND_JACK_HEADPHONE = 1 >> +# SND_JACK_MICROPHONE = 2 >> +#-------------------- > > No new examples, integrate it into some existing one. > >> + sound { >> + compatible = "simple-audio-card"; >> + simple-audio-card,widgets = >> + "Headphone", "Headphone Jack", >> + "Headset Mic", "Headset Mic Jack"; >> + simple-audio-card,routing = >> + "Headphone Jack", "HPLEFT", >> + "Headphone Jack", "HPRIGHT", >> + "LEFTIN", "Headset Mic", >> + "RIGHTIN", "Headset Mic"; >> + simple-audio-card,aux-devs = <&hp_jack>, <&hs_mic_jack>; >> + simple-audio-card,aux-jack-types = <1 2>; >> + simple-audio-card,cpu { >> + sound-dai = <&ssi2>; >> + }; >> + simple-audio-card,codec { >> + sound-dai = <&codec>; >> + clocks = <&clocks>; >> + }; >> + }; > > Best regards, > Krzysztof > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1 4/4] ASoC: dt-bindings: simple-card: create jack for aux_devs 2023-01-18 12:52 ` [PATCH v1 4/4] ASoC: dt-bindings: simple-card: create jack for aux_devs Astrid Rost 2023-01-19 11:18 ` Krzysztof Kozlowski @ 2023-01-19 16:17 ` Rob Herring 1 sibling, 0 replies; 4+ messages in thread From: Rob Herring @ 2023-01-19 16:17 UTC (permalink / raw) To: Astrid Rost Cc: Mark Brown, Liam Girdwood, Krzysztof Kozlowski, Kuninori Morimoto, kernel, alsa-devel, linux-kernel, devicetree On Wed, Jan 18, 2023 at 01:52:26PM +0100, Astrid Rost wrote: > Add simple-card,aux-jack-types: > Array of snd_jack_type to create jack-input-event for jack devices in > aux-devs. If the setting is 0, the supported type of the device is used. > A device which has the functions set_jack and get_jack_supported_type > counts as jack device. > > Signed-off-by: Astrid Rost <astrid.rost@axis.com> > --- > .../bindings/sound/simple-card.yaml | 35 +++++++++++++++++++ > 1 file changed, 35 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/simple-card.yaml b/Documentation/devicetree/bindings/sound/simple-card.yaml > index ed19899bc94b..2635b1c04fc9 100644 > --- a/Documentation/devicetree/bindings/sound/simple-card.yaml > +++ b/Documentation/devicetree/bindings/sound/simple-card.yaml > @@ -199,6 +199,13 @@ properties: > maxItems: 1 > simple-audio-card,mic-det-gpio: > maxItems: 1 > + simple-audio-card,aux-jack-types: Drop 'simple-audio-card,'. That way we can reuse this for the not-simple cases. I'm pretty sure we have some vendor specific properties for this already. Use those for inspiration and to create something which could replace them. > + $ref: "/schemas/types.yaml#/definitions/uint32-array" > + description: | > + Array of snd_jack_type to create jack-input-event for jack > + devices in aux-devs. If the setting is 0, the supported > + type of the device is used. A device which has the functions > + set_jack and get_jack_supported_type counts as jack device. Sounds like Linux details. How does BSD use this property? Rob ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-01-19 16:18 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20230118125226.333214-1-astrid.rost@axis.com>
2023-01-18 12:52 ` [PATCH v1 4/4] ASoC: dt-bindings: simple-card: create jack for aux_devs Astrid Rost
2023-01-19 11:18 ` Krzysztof Kozlowski
2023-01-19 16:00 ` Astrid Rost
2023-01-19 16:17 ` Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).