[PATCH V2 1/3] ASoC: fsl_esai: spba clock is needed by esai device

[Shengjiu Wang <shengjiu.wang@freescale.com>]

ESAI need to enable the spba clock, when sdma is using share peripheral
script. In this case, there is two spba master port is used, if don't
enable the clock, the spba bus will have arbitration issue, which may
cause read/write wrong data from/to ESAI registers.

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
---
 Documentation/devicetree/bindings/sound/fsl,esai.txt |  2 ++
 sound/soc/fsl/fsl_esai.c                             | 12 ++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
index d3b6b5f..f1d5351 100644
--- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -27,6 +27,8 @@ Required properties:
 			  derive HCK, SCK and FS.
 	"fsys"		  The system clock derived from ahb clock used to
 			  derive HCK, SCK and FS.
+	"spba"		  The spba clock is needed when two spba master port
+			  is used.
 
   - fsl,fifo-depth	: The number of elements in the transmit and receive
 			  FIFOs. This number is the maximum allowed value for
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 504e731..8749f53 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -54,6 +54,7 @@ struct fsl_esai {
 	struct clk *coreclk;
 	struct clk *extalclk;
 	struct clk *fsysclk;
+	struct clk *spbaclk;
 	u32 fifo_depth;
 	u32 slot_width;
 	u32 slots;
@@ -469,6 +470,9 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
 	ret = clk_prepare_enable(esai_priv->coreclk);
 	if (ret)
 		return ret;
+	ret = clk_prepare_enable(esai_priv->spbaclk);
+	if (ret)
+		goto err_spbaclk;
 	if (!IS_ERR(esai_priv->extalclk)) {
 		ret = clk_prepare_enable(esai_priv->extalclk);
 		if (ret)
@@ -499,6 +503,8 @@ err_fsysclk:
 	if (!IS_ERR(esai_priv->extalclk))
 		clk_disable_unprepare(esai_priv->extalclk);
 err_extalck:
+	clk_disable_unprepare(esai_priv->spbaclk);
+err_spbaclk:
 	clk_disable_unprepare(esai_priv->coreclk);
 
 	return ret;
@@ -564,6 +570,7 @@ static void fsl_esai_shutdown(struct snd_pcm_substream *substream,
 		clk_disable_unprepare(esai_priv->fsysclk);
 	if (!IS_ERR(esai_priv->extalclk))
 		clk_disable_unprepare(esai_priv->extalclk);
+	clk_disable_unprepare(esai_priv->spbaclk);
 	clk_disable_unprepare(esai_priv->coreclk);
 }
 
@@ -819,6 +826,11 @@ static int fsl_esai_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "failed to get fsys clock: %ld\n",
 				PTR_ERR(esai_priv->fsysclk));
 
+	esai_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
+	if (IS_ERR(esai_priv->spbaclk))
+		dev_warn(&pdev->dev, "Cannot get spba clock: %ld\n",
+				PTR_ERR(esai_priv->spbaclk));
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
-- 
1.9.1