From: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v4 2/2] dmaengine: at_hdmac: add device tree support
Date: Mon, 17 Oct 2011 14:56:41 +0200 [thread overview]
Message-ID: <d6d3e19422b70e4eee6beeebc524bbe45f9803ba.1318855784.git.nicolas.ferre@atmel.com> (raw)
In-Reply-To: <7cc84d91b280c5dde075c39de4feae5a6e6603a6.1318855784.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
In-Reply-To: <7cc84d91b280c5dde075c39de4feae5a6e6603a6.1318855784.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Add device tree probe support for atmel at_hdmac DMA driver.
Bindings are added to specify DMA controller configuration.
Signed-off-by: Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Acked-by: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
---
.../devicetree/bindings/dma/atmel-dma.txt | 14 ++++++++
drivers/dma/at_hdmac.c | 32 +++++++++++++++++++-
2 files changed, 45 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/atmel-dma.txt
diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
new file mode 100644
index 0000000..3c046ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -0,0 +1,14 @@
+* Atmel Direct Memory Access Controller (DMA)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-dma"
+- reg: Should contain DMA registers location and length
+- interrupts: Should contain DMA interrupt
+
+Examples:
+
+dma@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <21>;
+};
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index d1869c5..f3cb4a0 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -23,6 +23,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include "at_hdmac_regs.h"
@@ -1175,6 +1177,20 @@ static void atc_free_chan_resources(struct dma_chan *chan)
/*-- Module Management -----------------------------------------------*/
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_dma_dt_ids[] = {
+ {
+ .compatible = "atmel,at91sam9rl-dma",
+ .data = (void *)ATDMA_DEVTYPE_SAM9RL
+ }, {
+ .compatible = "atmel,at91sam9g45-dma",
+ .data = (void *)ATDMA_DEVTYPE_SAM9G45
+ }, { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_dma_dt_ids);
+#endif
+
static struct platform_device_id atdma_devtypes[] = {
{
.name = "at91sam9rl_dma",
@@ -1187,6 +1203,19 @@ static struct platform_device_id atdma_devtypes[] = {
}
};
+static inline enum atdma_devtype __init at_dma_get_driver_data(
+ struct platform_device *pdev)
+{
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(atmel_dma_dt_ids, pdev->dev.of_node);
+ if (match == NULL)
+ return ATDMA_DEVTYPE_UNDEFINED;
+ return (enum atdma_devtype)match->data;
+ }
+ return platform_get_device_id(pdev)->driver_data;
+}
+
/**
* at_dma_off - disable DMA controller
* @atdma: the Atmel HDAMC device
@@ -1218,7 +1247,7 @@ static int __init at_dma_probe(struct platform_device *pdev)
dma_cap_set(DMA_MEMCPY, cap_mask);
/* get DMA parameters from controller type */
- atdmatype = platform_get_device_id(pdev)->driver_data;
+ atdmatype = at_dma_get_driver_data(pdev);
switch (atdmatype) {
case ATDMA_DEVTYPE_SAM9RL:
@@ -1526,6 +1555,7 @@ static struct platform_driver at_dma_driver = {
.driver = {
.name = "at_hdmac",
.pm = &at_dma_dev_pm_ops,
+ .of_match_table = of_match_ptr(atmel_dma_dt_ids),
},
};
--
1.7.5.4
next prev parent reply other threads:[~2011-10-17 12:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-12 16:57 [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA Nicolas Ferre
[not found] ` <1318438634-11826-1-git-send-email-nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2011-10-12 16:57 ` [PATCH v3 1/4] dmaengine: at_hdmac: platform data move to use .id_table Nicolas Ferre
2011-10-12 16:57 ` [PATCH v3 2/4] dmaengine: at_hdmac: add device tree support Nicolas Ferre
2011-10-13 0:34 ` Grant Likely
2011-10-13 11:54 ` Nicolas Ferre
2011-10-12 16:57 ` [PATCH v3 4/4] ARM: at91/dma: DMA controller registering with DT support Nicolas Ferre
[not found] ` <8d71a02275bc252b3841bf9f0e2e17a16df6deda.1318438197.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2011-10-13 0:35 ` Grant Likely
2011-10-13 0:32 ` [PATCH v3 1/4] dmaengine: at_hdmac: platform data move to use .id_table Grant Likely
2011-10-12 16:57 ` [PATCH v3 3/4] ARM: at91/dma: remove platform data from DMA controller Nicolas Ferre
[not found] ` <bcf2b73ecc158bf20f94b00d3b8a6d140eff2026.1318438197.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2011-10-13 0:34 ` Grant Likely
2011-10-17 12:54 ` [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA Nicolas Ferre
2011-10-17 12:56 ` [PATCH v4 1/2] dmaengine: at_hdmac: platform data move to use .id_table Nicolas Ferre
[not found] ` <7cc84d91b280c5dde075c39de4feae5a6e6603a6.1318855784.git.nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2011-10-17 12:56 ` Nicolas Ferre [this message]
2011-10-24 9:34 ` Grant Likely
[not found] ` <20111024093414.GF8708-e0URQFbLeQY2iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2011-11-22 10:55 ` Nicolas Ferre
2011-10-23 14:30 ` [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA Nicolas Ferre
2011-10-24 3:04 ` Vinod Koul
2011-10-24 3:28 ` Vinod Koul
2011-10-24 9:05 ` Nicolas Ferre
[not found] ` <4E9C258D.3030509-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
2011-11-10 9:37 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d6d3e19422b70e4eee6beeebc524bbe45f9803ba.1318855784.git.nicolas.ferre@atmel.com \
--to=nicolas.ferre-aife0yeh4naavxtiumwx3w@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).