From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ujfalusi Subject: Re: [PATCH v2 1/3] dt-bindings: dmaengine: dma-common: Change dma-channel-mask to uint32-array Date: Wed, 18 Sep 2019 17:04:50 +0300 Message-ID: References: <20190910114559.22810-1-peter.ujfalusi@ti.com> <20190910114559.22810-2-peter.ujfalusi@ti.com> <20190918132835.GA4527@bogus> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20190918132835.GA4527@bogus> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring Cc: vkoul@kernel.org, dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org, dan.j.williams@intel.com, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On 18/09/2019 16.28, Rob Herring wrote: > On Tue, Sep 10, 2019 at 02:45:57PM +0300, Peter Ujfalusi wrote: >> Make the dma-channel-mask to be usable for controllers with more than 32 >> channels. >> >> Signed-off-by: Peter Ujfalusi >> --- >> Documentation/devicetree/bindings/dma/dma-common.yaml | 10 +++++++++- >> 1 file changed, 9 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml >> index ed0a49a6f020..41460946be64 100644 >> --- a/Documentation/devicetree/bindings/dma/dma-common.yaml >> +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml >> @@ -25,11 +25,19 @@ properties: >> Used to provide DMA controller specific information. >> >> dma-channel-mask: >> - $ref: /schemas/types.yaml#definitions/uint32 >> description: >> Bitmask of available DMA channels in ascending order that are >> not reserved by firmware and are available to the >> kernel. i.e. first channel corresponds to LSB. >> + allOf: >> + - $ref: /schemas/types.yaml#/definitions/uint32-array >> + items: >> + minItems = 1 > > '='? Just making up the syntax? Opps, sorry. > >> + maxItems = 255 # Should be enough >> + - description: Mask of channels 0-31 >> + - description: Mask of channels 32-63 > > You are mixing a schema and list here... Should I extend the description with something like this: "The first item in the array is for channels 0-31, the second is for channels 32-63, etc." To make sure that it is used in a correct and consistent manner. >> + ... > > That's end of doc marker in YAML... I believe I need some reading to do for YAML.. > >> + - description: Mask of chnanels X-(X+31) > > Obviously, this was not validated with 'make dt_binding_check'. make dt_bindings_check make: *** No rule to make target 'dt_bindings_check'. Stop. > What you want is: > > allOf: > - $ref: /schemas/types.yaml#/definitions/uint32-array > - minItems: 1 > maxItems: 255 # Should be enough OK and thanks for the comments. - Péter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki