From: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
To: shawnguo@kernel.org
Cc: broonie@kernel.org, festevam@gmail.com,
krzysztof.kozlowski@canonical.com, lgirdwood@gmail.com,
michael@amarulasolutions.com, robh+dt@kernel.org,
s.hauer@pengutronix.de, alsa-devel@alsa-project.org,
devicetree@vger.kernel.org, kernel@pengutronix.de,
linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4] arm64: dts: imx8mn-bsh-smm-s2pro: Add tlv320aic31xx audio card node
Date: Wed, 23 Mar 2022 10:59:28 -0300 [thread overview]
Message-ID: <d79b0b6a-97fc-52d3-c45b-ac7312e131b3@collabora.com> (raw)
In-Reply-To: <20220323135601.42435-1-ariel.dalessandro@collabora.com>
Shawn,
Can we get this integrated into the linux-next tree so it's available
for the merge window?
Note that dt-bindings/sound/tlv320aic31xx.h is already merged into
linux-next.
Regards,
Ariel
On 3/23/22 10:56, Ariel D'Alessandro wrote:
> BSH SystemMaster (SMM) S2 PRO board comes with an audio card based on
> tlv320aic31xx family codec.
>
> The audio card exposes two playback devices, one of them using the EASRC
> (Enhanced Asynchronous Sample Rate Converter) module. Note that this
> would require SDMA and EASRC firmware in order to work.
>
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
> ---
> .../dts/freescale/imx8mn-bsh-smm-s2pro.dts | 90 +++++++++++++++++++
> 1 file changed, 90 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
> index c6a8ed6745c1..fbbb3367037b 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
> @@ -7,6 +7,7 @@
> /dts-v1/;
>
> #include "imx8mn-bsh-smm-s2-common.dtsi"
> +#include <dt-bindings/sound/tlv320aic31xx.h>
>
> / {
> model = "BSH SMM S2 PRO";
> @@ -16,6 +17,65 @@ memory@40000000 {
> device_type = "memory";
> reg = <0x0 0x40000000 0x0 0x20000000>;
> };
> +
> + sound-tlv320aic31xx {
> + compatible = "fsl,imx-audio-tlv320aic31xx";
> + model = "tlv320aic31xx-hifi";
> + audio-cpu = <&sai3>;
> + audio-codec = <&tlv320dac3101>;
> + audio-asrc = <&easrc>;
> + audio-routing =
> + "Ext Spk", "SPL",
> + "Ext Spk", "SPR";
> + mclk-id = <PLL_CLKIN_BCLK>;
> + };
> +
> + vdd_input: vdd_input {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd_input";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +};
> +
> +&easrc {
> + fsl,asrc-rate = <48000>;
> + fsl,asrc-format = <10>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + clock-frequency = <400000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + tlv320dac3101: audio-codec@18 {
> + compatible = "ti,tlv320dac3101";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_dac_rst>;
> + reg = <0x18>;
> + #sound-dai-cells = <0>;
> + HPVDD-supply = <&buck4_reg>;
> + SPRVDD-supply = <&vdd_input>;
> + SPLVDD-supply = <&vdd_input>;
> + AVDD-supply = <&buck4_reg>;
> + IOVDD-supply = <&buck4_reg>;
> + DVDD-supply = <&buck5_reg>;
> + reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> + ai31xx-micbias-vg = <MICBIAS_AVDDV>;
> + clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
> + };
> +};
> +
> +&sai3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai3>;
> + assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
> + assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
> + assigned-clock-rates = <24576000>;
> + fsl,sai-mclk-direction-output;
> + status = "okay";
> };
>
> /* eMMC */
> @@ -30,6 +90,36 @@ &usdhc1 {
> };
>
> &iomuxc {
> + pinctrl_dac_rst: dacrstgrp {
> + fsl,pins = <
> + MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 /* DAC_RST */
> + >;
> + };
> +
> + pinctrl_espi2: espi2grp {
> + fsl,pins = <
> + MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x082
> + MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x082
> + MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x082
> + MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x040
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400000c3
> + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000c3
> + >;
> + };
> +
> + pinctrl_sai3: sai3grp {
> + fsl,pins = <
> + MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
> + MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
> + MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
> + >;
> + };
> +
> pinctrl_usdhc1: usdhc1grp {
> fsl,pins = <
> MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000090
next prev parent reply other threads:[~2022-03-23 13:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-23 13:56 [PATCH v4] arm64: dts: imx8mn-bsh-smm-s2pro: Add tlv320aic31xx audio card node Ariel D'Alessandro
2022-03-23 13:59 ` Ariel D'Alessandro [this message]
2022-03-25 13:49 ` Fabio Estevam
2022-03-25 13:56 ` Ariel D'Alessandro
2022-03-31 13:35 ` Ariel D'Alessandro
2022-03-31 13:48 ` Fabio Estevam
2022-04-05 19:39 ` Ariel D'Alessandro
2022-04-06 1:04 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d79b0b6a-97fc-52d3-c45b-ac7312e131b3@collabora.com \
--to=ariel.dalessandro@collabora.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski@canonical.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=michael@amarulasolutions.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).