Re: [PATCH v4 05/20] mtd: nand: qcom: DMA mapping support for register read buffer

[Archit Taneja <architt@codeaurora.org>]

On 08/11/2017 05:09 PM, Abhishek Sahu wrote:
> The EBI2 NAND controller directly remaps register read buffer with
> dma_map_sg and DMA address of this buffer will be passed to DMA
> API’s. While, on QPIC NAND controller, which uses BAM DMA, we read
> the controller registers by preparing a BAM command descriptor. This
> command descriptor requires the
> 
>    - controller register address
>    - the DMA address in which we want to store the value read
>      back from the controller register.
> 
> This command descriptor will be remapped with dma_map_sg
> and its DMA address will be passed to DMA API’s. Therefore,
> it's required that we also map our register read buffer for
> DMA (using dma_map_single). We use the returned DMA address
> for preparing entries in our command descriptor.
> 
> This patch adds the DMA mapping support for register read
> buffer. This buffer will be DMA mapped during allocation
> time. Before starting of any operation, this buffer will
> be synced for device operation and after operation
> completion, it will be synced again for CPU.
> 

Reviewed-by: Archit Taneja <architt@codeaurora.org>

Thanks,
Archit

> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
> ---
>   drivers/mtd/nand/qcom_nandc.c | 40 ++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 40 insertions(+)
> 
> diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c
> index 59b764a..590fc1d 100644
> --- a/drivers/mtd/nand/qcom_nandc.c
> +++ b/drivers/mtd/nand/qcom_nandc.c
> @@ -234,6 +234,7 @@ struct nandc_regs {
>    *				by upper layers directly
>    * @buf_size/count/start:	markers for chip->read_buf/write_buf functions
>    * @reg_read_buf:		local buffer for reading back registers via DMA
> + * @reg_read_dma:		contains dma address for register read buffer
>    * @reg_read_pos:		marker for data read in reg_read_buf
>    *
>    * @regs:			a contiguous chunk of memory for DMA register
> @@ -279,6 +280,7 @@ struct qcom_nand_controller {
>   	int		buf_start;
>   
>   	__le32 *reg_read_buf;
> +	dma_addr_t reg_read_dma;
>   	int reg_read_pos;
>   
>   	struct nandc_regs *regs;
> @@ -371,6 +373,24 @@ static inline void nandc_write(struct qcom_nand_controller *nandc, int offset,
>   	iowrite32(val, nandc->base + offset);
>   }
>   
> +static inline void nandc_read_buffer_sync(struct qcom_nand_controller *nandc,
> +					  bool is_cpu)
> +{
> +	if (!nandc->props->is_bam)
> +		return;
> +
> +	if (is_cpu)
> +		dma_sync_single_for_cpu(nandc->dev, nandc->reg_read_dma,
> +					MAX_REG_RD *
> +					sizeof(*nandc->reg_read_buf),
> +					DMA_FROM_DEVICE);
> +	else
> +		dma_sync_single_for_device(nandc->dev, nandc->reg_read_dma,
> +					   MAX_REG_RD *
> +					   sizeof(*nandc->reg_read_buf),
> +					   DMA_FROM_DEVICE);
> +}
> +
>   static __le32 *offset_to_nandc_reg(struct nandc_regs *regs, int offset)
>   {
>   	switch (offset) {
> @@ -854,6 +874,7 @@ static void free_descs(struct qcom_nand_controller *nandc)
>   static void clear_read_regs(struct qcom_nand_controller *nandc)
>   {
>   	nandc->reg_read_pos = 0;
> +	nandc_read_buffer_sync(nandc, false);
>   }
>   
>   static void pre_command(struct qcom_nand_host *host, int command)
> @@ -883,6 +904,7 @@ static void parse_erase_write_errors(struct qcom_nand_host *host, int command)
>   	int i;
>   
>   	num_cw = command == NAND_CMD_PAGEPROG ? ecc->steps : 1;
> +	nandc_read_buffer_sync(nandc, true);
>   
>   	for (i = 0; i < num_cw; i++) {
>   		u32 flash_status = le32_to_cpu(nandc->reg_read_buf[i]);
> @@ -904,6 +926,7 @@ static void post_command(struct qcom_nand_host *host, int command)
>   
>   	switch (command) {
>   	case NAND_CMD_READID:
> +		nandc_read_buffer_sync(nandc, true);
>   		memcpy(nandc->data_buffer, nandc->reg_read_buf,
>   		       nandc->buf_count);
>   		break;
> @@ -1067,6 +1090,7 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
>   	int i;
>   
>   	buf = (struct read_stats *)nandc->reg_read_buf;
> +	nandc_read_buffer_sync(nandc, true);
>   
>   	for (i = 0; i < ecc->steps; i++, buf++) {
>   		u32 flash, buffer, erased_cw;
> @@ -2003,6 +2027,16 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
>   		return -ENOMEM;
>   
>   	if (nandc->props->is_bam) {
> +		nandc->reg_read_dma =
> +			dma_map_single(nandc->dev, nandc->reg_read_buf,
> +				       MAX_REG_RD *
> +				       sizeof(*nandc->reg_read_buf),
> +				       DMA_FROM_DEVICE);
> +		if (dma_mapping_error(nandc->dev, nandc->reg_read_dma)) {
> +			dev_err(nandc->dev, "failed to DMA MAP reg buffer\n");
> +			return -EIO;
> +		}
> +
>   		nandc->tx_chan = dma_request_slave_channel(nandc->dev, "tx");
>   		if (!nandc->tx_chan) {
>   			dev_err(nandc->dev, "failed to request tx channel\n");
> @@ -2040,6 +2074,12 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
>   static void qcom_nandc_unalloc(struct qcom_nand_controller *nandc)
>   {
>   	if (nandc->props->is_bam) {
> +		if (!dma_mapping_error(nandc->dev, nandc->reg_read_dma))
> +			dma_unmap_single(nandc->dev, nandc->reg_read_dma,
> +					 MAX_REG_RD *
> +					 sizeof(*nandc->reg_read_buf),
> +					 DMA_FROM_DEVICE);
> +
>   		if (nandc->tx_chan)
>   			dma_release_channel(nandc->tx_chan);
>   
> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project