From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nicolas Ferre Subject: Re: [PATCH v3 0/5] Add SoM1 support Date: Thu, 6 Jul 2017 14:29:36 +0200 Message-ID: References: <1499330129-29319-1-git-send-email-claudiu.beznea@microchip.com> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1499330129-29319-1-git-send-email-claudiu.beznea@microchip.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: alexandre.belloni@free-electrons.com Cc: Claudiu Beznea , robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, sza@esh.hu, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, cristian.birsan@microchip.com, ludovic.desroches@microchip.com List-Id: devicetree@vger.kernel.org On 06/07/2017 at 10:35, Claudiu Beznea wrote: > Hi all, > > This series adds support for sama5d2 SoM1 devices. > > The at91-sama5d27_som1.dtsi add specific bindings for SoM1 board. > The at91-sama5d27_som1_ek.dts add specific bindings for SoM1 EK board. > > Thank you, > Claudiu You can add my: Acked-by: Nicolas Ferre for the whole series. (I remember that we also had Ludovic's one as well). Regards, > Changes in v3: > - remove qspi flash mapping for the moment > - remove at24 and i2c bindings; this will be introduced when > "Add at24 functionality to read form different EEPROM offsets" patch will > be accepted > - change the title of patch 5 from this series from > "ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support" to > "ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support" to > match the desired prefix > > Changes in v2: > o in at91-sama5d27_som1.dtsi: > - increase bootloader and kernel size in flash map (with bootloader > flash offset the dtb and kernel flash offsets were changed) > - use right pin for ethernet-phy interrupt > > o in at91-sama5d27_som1_ek.dts: > - removed memory tag and rely on bootloader to fill the right value > - use pin macros (from arch/arm/boot/dts/sama5d2-pinfunc.h) wherever > posible instead of pin numbers > - remove pinctrl_sensor_power and pinctrl_sensor_reset pin muxing > since they are not of intereset for this board > - use "pb4" label for user button instead of "bp1" > > Claudiu Beznea (2): > ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support > ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support > > Cristian Birsan (1): > drivers: soc: atmel: Add basic support for new sama5d2 SiPs > > Cyrille Pitchen (1): > ARM: dts: at91: sama5d2: add QSPI nodes > > Songjun Wu (1): > ARM: dts: at91: sama5d2: add isc node > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 +++++++++ > arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 551 ++++++++++++++++++++++++++++ > arch/arm/boot/dts/sama5d2.dtsi | 38 ++ > drivers/soc/atmel/soc.c | 8 + > drivers/soc/atmel/soc.h | 4 + > 6 files changed, 780 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi > create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts > -- Nicolas Ferre