Re: [PATCH v4 1/7] dt-bindings: iio: light: vcnl4000: add regulators

[Erikas Bitovtas <xerikasxx@gmail.com>]

On 3/17/26 9:20 AM, Krzysztof Kozlowski wrote:
> On Mon, Mar 16, 2026 at 07:19:45PM +0200, Erikas Bitovtas wrote:
>> These sensors can accept 2 supplies - one for the sensor and one for IR
>> LED [1]. Add supply properties for the sensor - 2 for the sensors and
>> one external, for their I2C bus, to ensure the sensor is powered on
>> before proceeding with setup.
>>
>> [1] https://www.vishay.com/docs/84274/vcnl4040.pdf
>>
>> Reviewed-by: David Lechner <dlechner@baylibre.com>
>> Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
>> ---
>>  Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml | 7 +++++++
>>  1 file changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
>> index 2ba4d5de4ec4..a1b4c02db246 100644
>> --- a/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
>> +++ b/Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
>> @@ -33,6 +33,10 @@ properties:
>>    interrupts:
>>      maxItems: 1
>>  
>> +  vdd-supply: true
>> +  vddio-supply: true
>> +  vled-supply: true
> 
> Same comments as before, I do not see improvements.
> 
> Best regards,
> Krzysztof
> 

I explained why in v3. The message can be found here:
https://lore.kernel.org/linux-iio/cb92bb47-9078-475d-b242-71e3f9181a72@baylibre.com/T/#m6da277894cf5c2b473fbeebd4b7bafc7519ebc26