* [PATCH v1] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
@ 2023-05-31 6:40 Francesco Dolcini
2023-05-31 7:19 ` Krzysztof Kozlowski
0 siblings, 1 reply; 2+ messages in thread
From: Francesco Dolcini @ 2023-05-31 6:40 UTC (permalink / raw)
To: Greg Kroah-Hartman, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Vignesh Raghavendra, linux-serial, devicetree
Cc: Francesco Dolcini, linux-kernel
From: Francesco Dolcini <francesco.dolcini@toradex.com>
Add rs485-rts-active-high property, this was removed by mistake.
In general we just use rs485-rts-active-low property, however the OMAP
UART for legacy reason uses the -high one.
Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties")
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
Documentation/devicetree/bindings/serial/8250_omap.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index eb3488d8f9ee..6a7be42da523 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -70,6 +70,7 @@ properties:
dsr-gpios: true
rng-gpios: true
dcd-gpios: true
+ rs485-rts-active-high: true
rts-gpio: true
power-domains: true
clock-frequency: true
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v1] dt-bindings: serial: 8250_omap: add rs485-rts-active-high
2023-05-31 6:40 [PATCH v1] dt-bindings: serial: 8250_omap: add rs485-rts-active-high Francesco Dolcini
@ 2023-05-31 7:19 ` Krzysztof Kozlowski
0 siblings, 0 replies; 2+ messages in thread
From: Krzysztof Kozlowski @ 2023-05-31 7:19 UTC (permalink / raw)
To: Francesco Dolcini, Greg Kroah-Hartman, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Vignesh Raghavendra,
linux-serial, devicetree
Cc: Francesco Dolcini, linux-kernel
On 31/05/2023 08:40, Francesco Dolcini wrote:
> From: Francesco Dolcini <francesco.dolcini@toradex.com>
>
> Add rs485-rts-active-high property, this was removed by mistake.
> In general we just use rs485-rts-active-low property, however the OMAP
> UART for legacy reason uses the -high one.
>
> Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties")
> Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
We do not add Reported-by tags for own reports. Otherwise all patches
would carry them. Reported-by is to credit 3rd party reported who did
not write the patch.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-05-31 7:20 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-05-31 6:40 [PATCH v1] dt-bindings: serial: 8250_omap: add rs485-rts-active-high Francesco Dolcini
2023-05-31 7:19 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).