devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marek Vasut <marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Geert Uytterhoeven <geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
Cc: Linux-Renesas
	<linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Marek Vasut
	<marek.vasut+renesas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
	<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Geert Uytterhoeven
	<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Subject: Re: [PATCH 1/4] mfd: Add ROHM BD9571MWV-M PMIC DT bindings
Date: Thu, 20 Apr 2017 14:51:40 +0200	[thread overview]
Message-ID: <dbfbadbd-9850-4a8e-581f-abd5ae39e841@gmail.com> (raw)
In-Reply-To: <CAMuHMdUUkZ_si8DAmvY_KvNF8tO=q2wHzjqRCjxXJD3-XxxJFw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>

On 04/20/2017 02:35 PM, Geert Uytterhoeven wrote:
> Hi Marek,

Hi!

> On Sun, Apr 16, 2017 at 8:07 PM, Marek Vasut <marek.vasut-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> Add DT bindings for the ROHM BD9571MWV-M PMIC. This PMIC has
>> the following features:
>> - multiple voltage monitors for 1V8, 2V5, 3V3 voltage rail
>> - one voltage regulator for DVFS
>> - two GPIOs
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> Cc: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
>> Cc: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
>> Cc: linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> ---
>>  .../devicetree/bindings/mfd/bd9571mwv.txt          | 49 ++++++++++++++++++++++
>>  1 file changed, 49 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mfd/bd9571mwv.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
>> new file mode 100644
>> index 000000000000..0952ee3bc30b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
>> @@ -0,0 +1,49 @@
>> +* ROHM BD9571MWV Power Management Integrated Circuit (PMIC) bindings
>> +
>> +Required properties:
>> + - compatible          : Should be "rohm,bd9571mwv".
>> + - reg                 : I2C slave address.
>> + - interrupt-parent    : Phandle to the parent interrupt controller.
>> + - interrupts          : The interrupt line the device is connected to.
>> + - interrupt-controller        : Marks the device node as an interrupt controller.
>> + - #interrupt-cells    : The number of cells to describe an IRQ, should be 2.
>> +                           The first cell is the IRQ number.
>> +                           The second cell is the flags, encoded as trigger
>> +                           masks from ../interrupt-controller/interrupts.txt.
>> + - gpio-controller      : Marks the device node as a GPIO Controller.
>> + - #gpio-cells          : Should be two.  The first cell is the pin number and
>> +                            the second cell is used to specify flags.
>> +                            See ../gpio/gpio.txt for more information.
>> + - regulators:          : List of child nodes that specify the regulator
>> +                            initialization data. Child nodes must be named
>> +                            after their hardware counterparts:
>> +                            - vd18
>> +                            - vd25
>> +                            - vd33
>> +                            - dvfs
> 
> Missing vd09, which is used for VDD0.8 on Salvator-X.

This is not supported by the driver, I don't think we should prematurely
add it into the bindings. We can add it later though.

>> +                           Each child node is defined using the standard
>> +                           binding for regulators.
>> +
>> +Example:
>> +
>> +       pmic: bd9571mwv@30 {
>> +               compatible = "rohm,bd9571mwv";
>> +               reg = <0x30>;
>> +               interrupt-parent = <&gpio2>;
>> +               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> +               interrupt-controller;
>> +               #interrupt-cells = <2>;
>> +               gpio-controller;
>> +               #gpio-cells = <2>;
>> +
>> +               regulators {
>> +                       dvfs: dvfs {
>> +                               compatible = "regulator-fixed";
> 
> What's the purpose of this compatible value?

The purpose is for it to be removed in V2 , thanks for catching this one.

>> +                               regulator-name = "dvfs";
>> +                               regulator-min-microvolt = <750000>;
>> +                               regulator-max-microvolt = <1030000>;
>> +                               regulator-boot-on;
>> +                               regulator-always-on;
>> +                       };
>> +               };
>> +       };
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
> 


-- 
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2017-04-20 12:51 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-16 18:07 [PATCH 1/4] mfd: Add ROHM BD9571MWV-M PMIC DT bindings Marek Vasut
2017-04-20 12:35 ` Geert Uytterhoeven
     [not found]   ` <CAMuHMdUUkZ_si8DAmvY_KvNF8tO=q2wHzjqRCjxXJD3-XxxJFw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-04-20 12:51     ` Marek Vasut [this message]
     [not found]       ` <dbfbadbd-9850-4a8e-581f-abd5ae39e841-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-04-20 14:09         ` Rob Herring
2017-04-20 16:59           ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dbfbadbd-9850-4a8e-581f-abd5ae39e841@gmail.com \
    --to=marek.vasut-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org \
    --cc=geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org \
    --cc=linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=marek.vasut+renesas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).