From: Matthias Brugger <matthias.bgg@gmail.com>
To: Erin Lo <erin.lo@mediatek.com>
Cc: srv_heupstream@mediatek.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
YT Shen <yt.shen@mediatek.com>
Subject: Re: [PATCH 3/3] arm: dts: mt2701: Add display subsystem related nodes for MT2701
Date: Mon, 12 Jun 2017 11:13:43 +0200 [thread overview]
Message-ID: <dc75371a-b9f4-9393-4c09-0a07d20ee169@gmail.com> (raw)
In-Reply-To: <1496297324-21091-4-git-send-email-erin.lo@mediatek.com>
On 01/06/17 08:08, Erin Lo wrote:
> From: YT Shen <yt.shen@mediatek.com>
>
> This patch adds the device nodes for the DISP function blocks for MT2701
>
> Signed-off-by: YT Shen <yt.shen@mediatek.com>
> Signed-off-by: Erin Lo <erin.lo@mediatek.com>
> ---
> arch/arm/boot/dts/mt2701.dtsi | 84 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 84 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
> index 4f110d5..e20b65c 100644
> --- a/arch/arm/boot/dts/mt2701.dtsi
> +++ b/arch/arm/boot/dts/mt2701.dtsi
> @@ -17,6 +17,7 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/reset/mt2701-resets.h>
> +#include <dt-bindings/memory/mt2701-larb-port.h>
> #include "skeleton64.dtsi"
> #include "mt2701-pinfunc.h"
>
> @@ -24,6 +25,11 @@
> compatible = "mediatek,mt2701";
> interrupt-parent = <&sysirq>;
>
> + aliases {
> + rdma0 = &rdma0;
> + rdma1 = &rdma1;
> + };
> +
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -201,6 +207,16 @@
> power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> };
>
> + mipi_tx0: mipi-dphy@10010000 {
> + compatible = "mediatek,mt2701-mipi-tx";
> + reg = <0 0x10010000 0 0x90>;
> + clocks = <&clk26m>;
> + clock-output-names = "mipi_tx0_pll";
> + #clock-cells = <0>;
> + #phy-cells = <0>;
> + status = "disabled";
> + };
> +
> sysirq: interrupt-controller@10200100 {
> compatible = "mediatek,mt2701-sysirq",
> "mediatek,mt6577-sysirq";
> @@ -366,6 +382,39 @@
> #clock-cells = <1>;
> };
>
> + display_components: dispsys@14000000 {
> + compatible = "mediatek,mt2701-mmsys";
> + reg = <0 0x14000000 0 0x1000>;
> + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> + };
Can you please rebase on a recent kernel version. mt2701-mmsys node is
already present.
Thanks,
Matthias
> +
> + ovl@14007000 {
> + compatible = "mediatek,mt2701-disp-ovl";
> + reg = <0 0x14007000 0 0x1000>;
> + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_OVL>;
> + iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + rdma0: rdma@14008000 {
> + compatible = "mediatek,mt2701-disp-rdma";
> + reg = <0 0x14008000 0 0x1000>;
> + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_RDMA>;
> + iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
> + mediatek,larb = <&larb0>;
> + };
> +
> + wdma@14009000 {
> + compatible = "mediatek,mt2701-disp-wdma";
> + reg = <0 0x14009000 0 0x1000>;
> + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_WDMA>;
> + iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
> + mediatek,larb = <&larb0>;
> + };
> +
> bls: bls@1400a000 {
> compatible = "mediatek,mt2701-disp-pwm";
> reg = <0 0x1400a000 0 0x1000>;
> @@ -375,6 +424,32 @@
> status = "disabled";
> };
>
> + color@1400b000 {
> + compatible = "mediatek,mt2701-disp-color";
> + reg = <0 0x1400b000 0 0x1000>;
> + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_COLOR>;
> + };
> +
> + dsi: dsi@1400c000 {
> + compatible = "mediatek,mt2701-dsi";
> + reg = <0 0x1400c000 0 0x1000>;
> + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DSI_ENGINE>, <&mmsys CLK_MM_DSI_DIG>,
> + <&mipi_tx0>;
> + clock-names = "engine", "digital", "hs";
> + phys = <&mipi_tx0>;
> + phy-names = "dphy";
> + status = "disabled";
> + };
> +
> + mutex: mutex@1400e000 {
> + compatible = "mediatek,mt2701-disp-mutex";
> + reg = <0 0x1400e000 0 0x1000>;
> + interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_MUTEX_32K>;
> + };
> +
> larb0: larb@14010000 {
> compatible = "mediatek,mt2701-smi-larb";
> reg = <0 0x14010000 0 0x1000>;
> @@ -385,6 +460,15 @@
> power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
> };
>
> + rdma1: rdma@14012000 {
> + compatible = "mediatek,mt2701-disp-rdma";
> + reg = <0 0x14012000 0 0x1000>;
> + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> + iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
> + mediatek,larb = <&larb0>;
> + };
> +
> imgsys: syscon@15000000 {
> compatible = "mediatek,mt2701-imgsys", "syscon";
> reg = <0 0x15000000 0 0x1000>;
>
next prev parent reply other threads:[~2017-06-12 9:13 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-01 6:08 [PATCH 0/3] Add some DT nodes for Mediatek MT2701 Erin Lo
[not found] ` <1496297324-21091-1-git-send-email-erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-06-01 6:08 ` [PATCH 1/3] arm: dts: mt2701: Add ethernet device node Erin Lo
[not found] ` <1496297324-21091-2-git-send-email-erin.lo-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-06-09 8:22 ` Matthias Brugger
[not found] ` <d0a1217b-7761-fea6-888a-da06573400b8-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-14 3:08 ` Sean Wang
2017-06-01 6:08 ` [PATCH 2/3] arm: dts: mt2701: Add display bls related nodes for MT2701 Erin Lo
2017-06-09 8:12 ` Matthias Brugger
[not found] ` <82c8b877-ec34-bd37-7428-8af86191a66e-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-15 5:34 ` Weiqing Kong
2017-06-01 6:08 ` [PATCH 3/3] arm: dts: mt2701: Add display subsystem " Erin Lo
2017-06-09 8:14 ` Matthias Brugger
[not found] ` <eafa6c79-4d12-abf5-f8ec-e91c6cc22cd4-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-09 8:22 ` Philipp Zabel
2017-06-09 10:59 ` Matthias Brugger
2017-06-12 9:13 ` Matthias Brugger [this message]
[not found] ` <dc75371a-b9f4-9393-4c09-0a07d20ee169-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-06-16 13:54 ` YT Shen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dc75371a-b9f4-9393-4c09-0a07d20ee169@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=erin.lo@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=srv_heupstream@mediatek.com \
--cc=yt.shen@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).