Re: [PATCH v4 4/4] arm64: dts: qcom: purwa-iot-evk: Describe the PCIe M.2 Key E connector

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 8/4/26 2:32 PM, Wei Deng wrote:
> The Purwa IoT EVK has a PCIe M.2 Mechanical Key E connector for wireless
> connectivity cards exposing Wi-Fi over PCIe and Bluetooth over UART.
> Purwa inherits hamoa.dtsi via purwa.dtsi and therefore reuses the PCIe
> root port compatible and the uart14_ep / pcie4_port0_ep endpoint stub
> labels added there.
> 
> Describe the connector node with:
> - port@0: PCIe for Wi-Fi, linked to pcie4_port0
> - port@3: UART for Bluetooth, linked to uart14
> 
> This allows the pwrseq-pcie-m2 driver to manage card power and
> dynamically create the UART serdev for UART BT variants of the M.2
> card.
> 
> Remove the chip-specific wcn7850-pmu node, the static bluetooth
> serdev under uart14, and the wifi@0 PCI child node, as the M.2
> connector approach replaces WCN7850-specific power sequencing with
> a chip-agnostic model.
> 
> Also remove the now-unused vreg_wcn_0p95 and vreg_wcn_1p9 dummy
> fixed regulators whose only consumers were the wcn7850-pmu node.
> 
> Signed-off-by: Wei Deng <wei.deng@oss.qualcomm.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad