From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>,
Loic Poulain <loic.poulain@oss.qualcomm.com>,
Robert Foss <rfoss@kernel.org>,
Andi Shyti <andi.shyti@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Todor Tomov <todor.too@gmail.com>,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
aiqun.yu@oss.qualcomm.com, tingwei.zhang@oss.qualcomm.com,
trilok.soni@oss.qualcomm.com, yijie.yang@oss.qualcomm.com,
Jingyi Wang <jingyi.wang@oss.qualcomm.com>,
Atiya Kailany <atiya.kailany@oss.qualcomm.com>
Subject: Re: [PATCH v6 1/5] media: dt-bindings: Add CAMSS device for Kaanapali
Date: Sun, 16 Nov 2025 13:50:04 +0000 [thread overview]
Message-ID: <df803cca-3133-41c8-8d74-e9ac88a4dbef@linaro.org> (raw)
In-Reply-To: <20251113-add-support-for-camss-on-kaanapali-v6-1-1e6038785a8e@oss.qualcomm.com>
On 14/11/2025 03:29, Hangxiang Ma wrote:
> Add the compatible string "qcom,kaanapali-camss" to support the Camera
> Subsystem (CAMSS) on the Qualcomm Kaanapali platform.
>
> The Kaanapali platform provides:
> - 3 x VFE, 5 RDI per VFE
> - 2 x VFE Lite, 4 RDI per VFE Lite
> - 3 x CSID
> - 2 x CSID Lite
> - 6 x CSIPHY
>
> Signed-off-by: Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
> ---
> .../bindings/media/qcom,kaanapali-camss.yaml | 639 +++++++++++++++++++++
> 1 file changed, 639 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,kaanapali-camss.yaml b/Documentation/devicetree/bindings/media/qcom,kaanapali-camss.yaml
> new file mode 100644
> index 000000000000..673a3e8b68a2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,kaanapali-camss.yaml
> @@ -0,0 +1,639 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,kaanapali-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Kaanapali Camera Subsystem (CAMSS)
> +
> +maintainers:
> + - Hangxiang Ma <hangxiang.ma@oss.qualcomm.com>
> +
> +description:
> + This binding describes the camera subsystem hardware found on Kaanapali
> + Qualcomm SoCs. It includes submodules such as CSIPHY (CSI Physical layer)
> + and CSID (CSI Decoder), which comply with the MIPI CSI2 protocol.
> +
> + The subsystem also integrates a set of real-time image processing engines
> + and their associated configuration modules, as well as non-real-time engines.
> +
> + Additionally, it encompasses a test pattern generator (TPG) submodule.
> +
> +properties:
> + compatible:
> + const: qcom,kaanapali-camss
> +
> + reg:
> + items:
> + - description: Registers for CSID 0
> + - description: Registers for CSID 1
> + - description: Registers for CSID 2
> + - description: Registers for CSID Lite 0
> + - description: Registers for CSID Lite 1
> + - description: Registers for CSIPHY 0
> + - description: Registers for CSIPHY 1
> + - description: Registers for CSIPHY 2
> + - description: Registers for CSIPHY 3
> + - description: Registers for CSIPHY 4
> + - description: Registers for CSIPHY 5
> + - description: Registers for VFE (Video Front End) 0
> + - description: Registers for VFE 1
> + - description: Registers for VFE 2
> + - description: Registers for VFE Lite 0
> + - description: Registers for VFE Lite 1
> + - description: Registers for ICP (Imaging Control Processor) 0
> + - description: Registers for ICP 1
> + - description: Registers for IPE (Image Processing Engine)
> + - description: Registers for JPEG DMA & Downscaler
> + - description: Registers for JPEG Encoder
> + - description: Registers for OFE (Offline Front End)
> + - description: Registers for RT CDM (Camera Data Mover) 0
> + - description: Registers for RT CDM 1
> + - description: Registers for RT CDM 2
> + - description: Registers for RT CDM 3
> + - description: Registers for RT CDM 4
> + - description: Registers for TPG 0
> + - description: Registers for TPG 1
> + - description: Registers for TPG 2
> +
> + reg-names:
> + items:
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid_lite0
> + - const: csid_lite1
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: csiphy3
> + - const: csiphy4
> + - const: csiphy5
> + - const: vfe0
> + - const: vfe1
> + - const: vfe2
> + - const: vfe_lite0
> + - const: vfe_lite1
> + - const: icp0
> + - const: icp1
> + - const: ipe
> + - const: jpeg_dma
> + - const: jpeg_enc
> + - const: ofe
> + - const: rt_cdm0
> + - const: rt_cdm1
> + - const: rt_cdm2
> + - const: rt_cdm3
> + - const: rt_cdm4
> + - const: tpg0
> + - const: tpg1
> + - const: tpg2
> +
> + clocks:
> + maxItems: 60
> +
> + clock-names:
> + items:
> + - const: camnoc_nrt_axi
> + - const: camnoc_rt_axi
> + - const: camnoc_rt_vfe0
> + - const: camnoc_rt_vfe1
> + - const: camnoc_rt_vfe2
> + - const: camnoc_rt_vfe_lite
> + - const: cam_top_ahb
> + - const: cam_top_fast_ahb
> + - const: csid
> + - const: csid_csiphy_rx
> + - const: csiphy0
> + - const: csiphy0_timer
> + - const: csiphy1
> + - const: csiphy1_timer
> + - const: csiphy2
> + - const: csiphy2_timer
> + - const: csiphy3
> + - const: csiphy3_timer
> + - const: csiphy4
> + - const: csiphy4_timer
> + - const: csiphy5
> + - const: csiphy5_timer
> + - const: gcc_hf_axi
> + - const: vfe0
> + - const: vfe0_fast_ahb
> + - const: vfe1
> + - const: vfe1_fast_ahb
> + - const: vfe2
> + - const: vfe2_fast_ahb
> + - const: vfe_lite
> + - const: vfe_lite_ahb
> + - const: vfe_lite_cphy_rx
> + - const: vfe_lite_csid
> + - const: qdss_debug_xo
> + - const: camnoc_ipe_nps
> + - const: camnoc_ofe
> + - const: gcc_sf_axi
> + - const: icp0
> + - const: icp0_ahb
> + - const: icp1
> + - const: icp1_ahb
> + - const: ipe_nps
> + - const: ipe_nps_ahb
> + - const: ipe_nps_fast_ahb
> + - const: ipe_pps
> + - const: ipe_pps_fast_ahb
> + - const: jpeg
> + - const: ofe_ahb
> + - const: ofe_anchor
> + - const: ofe_anchor_fast_ahb
> + - const: ofe_hdr
> + - const: ofe_hdr_fast_ahb
> + - const: ofe_main
> + - const: ofe_main_fast_ahb
> + - const: vfe0_bayer
> + - const: vfe0_bayer_fast_ahb
> + - const: vfe1_bayer
> + - const: vfe1_bayer_fast_ahb
> + - const: vfe2_bayer
> + - const: vfe2_bayer_fast_ahb
> +
> + interrupts:
> + maxItems: 30
> +
> + interrupt-names:
> + items:
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid_lite0
> + - const: csid_lite1
> + - const: csiphy0
> + - const: csiphy1
> + - const: csiphy2
> + - const: csiphy3
> + - const: csiphy4
> + - const: csiphy5
> + - const: vfe0
> + - const: vfe1
> + - const: vfe2
> + - const: vfe_lite0
> + - const: vfe_lite1
> + - const: camnoc_nrt
> + - const: camnoc_rt
> + - const: icp0
> + - const: icp1
> + - const: jpeg_dma
> + - const: jpeg_enc
> + - const: rt_cdm0
> + - const: rt_cdm1
> + - const: rt_cdm2
> + - const: rt_cdm3
> + - const: rt_cdm4
> + - const: tpg0
> + - const: tpg1
> + - const: tpg2
> +
> + interconnects:
> + maxItems: 4
> +
> + interconnect-names:
> + items:
> + - const: ahb
> + - const: hf_mnoc
> + - const: sf_icp_mnoc
> + - const: sf_mnoc
> +
> + iommus:
> + items:
> + - description: VFE non-protected stream
> + - description: ICP0 shared stream
> + - description: ICP1 shared stream
> + - description: IPE CDM non-protected stream
> + - description: IPE non-protected stream
> + - description: JPEG non-protected stream
> + - description: OFE CDM non-protected stream
> + - description: OFE non-protected stream
> + - description: VFE / VFE Lite CDM non-protected stream
> +
> + power-domains:
> + items:
> + - description:
> + VFE0 GDSC - Global Distributed Switch Controller for VFE0.
> + - description:
> + VFE1 GDSC - Global Distributed Switch Controller for VFE1.
> + - description:
> + VFE2 GDSC - Global Distributed Switch Controller for VFE2.
> + - description:
> + Titan GDSC - Global Distributed Switch Controller for the entire camss.
> + - description:
> + IPE GDSC - Global Distributed Switch Controller for IPE.
> + - description:
> + OFE GDSC - Block Global Distributed Switch Controller for OFE.
> +
> + power-domain-names:
> + items:
> + - const: vfe0
> + - const: vfe1
> + - const: vfe2
> + - const: top
> + - const: ipe
> + - const: ofe
> +
> + vdd-csiphy0-0p8-supply:
> + description:
> + Phandle to a 0.8V regulator supply to CSIPHY0 core block.
> +
> + vdd-csiphy0-1p2-supply:
> + description:
> + Phandle to a 1.2V regulator supply to CSIPHY0 pll block.
> +
> + vdd-csiphy1-0p8-supply:
> + description:
> + Phandle to a 0.8V regulator supply to CSIPHY1 core block.
> +
> + vdd-csiphy1-1p2-supply:
> + description:
> + Phandle to a 1.2V regulator supply to CSIPHY1 pll block.
> +
> + vdd-csiphy2-0p8-supply:
> + description:
> + Phandle to a 0.8V regulator supply to CSIPHY2 core block.
> +
> + vdd-csiphy2-1p2-supply:
> + description:
> + Phandle to a 1.2V regulator supply to CSIPHY2 pll block.
> +
> + vdd-csiphy3-0p8-supply:
> + description:
> + Phandle to a 0.8V regulator supply to CSIPHY3 core block.
> +
> + vdd-csiphy3-1p2-supply:
> + description:
> + Phandle to a 1.2V regulator supply to CSIPHY3 pll block.
> +
> + vdd-csiphy4-0p8-supply:
> + description:
> + Phandle to a 0.8V regulator supply to CSIPHY4 core block.
> +
> + vdd-csiphy4-1p2-supply:
> + description:
> + Phandle to a 1.2V regulator supply to CSIPHY4 pll block.
> +
> + vdd-csiphy5-0p8-supply:
> + description:
> + Phandle to a 0.8V regulator supply to CSIPHY5 core block.
> +
> + vdd-csiphy5-1p2-supply:
> + description:
> + Phandle to a 1.2V regulator supply to CSIPHY5 pll block.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + description:
> + CSI input ports.
> +
> +patternProperties:
> + "^port@[0-5]$":
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + Input ports for receiving CSI data on CSIPHY 0-5.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + required:
> + - data-lanes
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - interrupts
> + - interrupt-names
> + - interconnects
> + - interconnect-names
> + - iommus
> + - power-domains
> + - power-domain-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interconnect/qcom,icc.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/qcom,rpmhpd.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + isp@9253000 {
> + compatible = "qcom,kaanapali-camss";
> +
> + reg = <0x0 0x09253000 0x0 0x5e80>,
> + <0x0 0x09263000 0x0 0x5e80>,
> + <0x0 0x09273000 0x0 0x5e80>,
> + <0x0 0x092d3000 0x0 0x3880>,
> + <0x0 0x092e7000 0x0 0x3880>,
> + <0x0 0x09523000 0x0 0x2000>,
> + <0x0 0x09525000 0x0 0x2000>,
> + <0x0 0x09527000 0x0 0x2000>,
> + <0x0 0x09529000 0x0 0x2000>,
> + <0x0 0x0952b000 0x0 0x2000>,
> + <0x0 0x0952d000 0x0 0x2000>,
> + <0x0 0x09151000 0x0 0x20000>,
> + <0x0 0x09171000 0x0 0x20000>,
> + <0x0 0x09191000 0x0 0x20000>,
> + <0x0 0x092dc000 0x0 0x1300>,
> + <0x0 0x092f0000 0x0 0x1300>,
> + <0x0 0x0900e000 0x0 0x1000>,
> + <0x0 0x0902e000 0x0 0x1000>,
> + <0x0 0x090d7000 0x0 0x20000>,
> + <0x0 0x0904e000 0x0 0x1000>,
> + <0x0 0x0904d000 0x0 0x1000>,
> + <0x0 0x09057000 0x0 0x40000>,
> + <0x0 0x09147000 0x0 0x580>,
> + <0x0 0x09148000 0x0 0x580>,
> + <0x0 0x09149000 0x0 0x580>,
> + <0x0 0x0914a000 0x0 0x580>,
> + <0x0 0x0914b000 0x0 0x580>,
> + <0x0 0x093fd000 0x0 0x400>,
> + <0x0 0x093fe000 0x0 0x400>,
> + <0x0 0x093ff000 0x0 0x400>;
> + reg-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid_lite0",
> + "csid_lite1",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "csiphy5",
> + "vfe0",
> + "vfe1",
> + "vfe2",
> + "vfe_lite0",
> + "vfe_lite1",
> + "icp0",
> + "icp1",
> + "ipe",
> + "jpeg_dma",
> + "jpeg_enc",
> + "ofe",
> + "rt_cdm0",
> + "rt_cdm1",
> + "rt_cdm2",
> + "rt_cdm3",
> + "rt_cdm4",
> + "tpg0",
> + "tpg1",
> + "tpg2";
> +
> + clocks = <&camcc_cam_cc_camnoc_nrt_axi_clk>,
> + <&camcc_cam_cc_camnoc_rt_axi_clk>,
> + <&camcc_cam_cc_camnoc_rt_vfe_0_main_clk>,
> + <&camcc_cam_cc_camnoc_rt_vfe_1_main_clk>,
> + <&camcc_cam_cc_camnoc_rt_vfe_2_main_clk>,
> + <&camcc_cam_cc_camnoc_rt_vfe_lite_clk>,
> + <&camcc_cam_cc_cam_top_ahb_clk>,
> + <&camcc_cam_cc_cam_top_fast_ahb_clk>,
> + <&camcc_cam_cc_csid_clk>,
> + <&camcc_cam_cc_csid_csiphy_rx_clk>,
> + <&camcc_cam_cc_csiphy0_clk>,
> + <&camcc_cam_cc_csi0phytimer_clk>,
> + <&camcc_cam_cc_csiphy1_clk>,
> + <&camcc_cam_cc_csi1phytimer_clk>,
> + <&camcc_cam_cc_csiphy2_clk>,
> + <&camcc_cam_cc_csi2phytimer_clk>,
> + <&camcc_cam_cc_csiphy3_clk>,
> + <&camcc_cam_cc_csi3phytimer_clk>,
> + <&camcc_cam_cc_csiphy4_clk>,
> + <&camcc_cam_cc_csi4phytimer_clk>,
> + <&camcc_cam_cc_csiphy5_clk>,
> + <&camcc_cam_cc_csi5phytimer_clk>,
> + <&gcc_gcc_camera_hf_axi_clk>,
> + <&camcc_cam_cc_vfe_0_main_clk>,
> + <&camcc_cam_cc_vfe_0_main_fast_ahb_clk>,
> + <&camcc_cam_cc_vfe_1_main_clk>,
> + <&camcc_cam_cc_vfe_1_main_fast_ahb_clk>,
> + <&camcc_cam_cc_vfe_2_main_clk>,
> + <&camcc_cam_cc_vfe_2_main_fast_ahb_clk>,
> + <&camcc_cam_cc_vfe_lite_clk>,
> + <&camcc_cam_cc_vfe_lite_ahb_clk>,
> + <&camcc_cam_cc_vfe_lite_cphy_rx_clk>,
> + <&camcc_cam_cc_vfe_lite_csid_clk>,
> + <&camcc_cam_cc_qdss_debug_xo_clk>,
> + <&camcc_cam_cc_camnoc_nrt_ipe_nps_clk>,
> + <&camcc_cam_cc_camnoc_nrt_ofe_main_clk>,
> + <&gcc_gcc_camera_sf_axi_clk>,
> + <&camcc_cam_cc_icp_0_clk>,
> + <&camcc_cam_cc_icp_0_ahb_clk>,
> + <&camcc_cam_cc_icp_1_clk>,
> + <&camcc_cam_cc_icp_1_ahb_clk>,
> + <&camcc_cam_cc_ipe_nps_clk>,
> + <&camcc_cam_cc_ipe_nps_ahb_clk>,
> + <&camcc_cam_cc_ipe_nps_fast_ahb_clk>,
> + <&camcc_cam_cc_ipe_pps_clk>,
> + <&camcc_cam_cc_ipe_pps_fast_ahb_clk>,
> + <&camcc_cam_cc_jpeg_clk>,
> + <&camcc_cam_cc_ofe_ahb_clk>,
> + <&camcc_cam_cc_ofe_anchor_clk>,
> + <&camcc_cam_cc_ofe_anchor_fast_ahb_clk>,
> + <&camcc_cam_cc_ofe_hdr_clk>,
> + <&camcc_cam_cc_ofe_hdr_fast_ahb_clk>,
> + <&camcc_cam_cc_ofe_main_clk>,
> + <&camcc_cam_cc_ofe_main_fast_ahb_clk>,
> + <&camcc_cam_cc_vfe_0_bayer_clk>,
> + <&camcc_cam_cc_vfe_0_bayer_fast_ahb_clk>,
> + <&camcc_cam_cc_vfe_1_bayer_clk>,
> + <&camcc_cam_cc_vfe_1_bayer_fast_ahb_clk>,
> + <&camcc_cam_cc_vfe_2_bayer_clk>,
> + <&camcc_cam_cc_vfe_2_bayer_fast_ahb_clk>;
> + clock-names = "camnoc_nrt_axi",
> + "camnoc_rt_axi",
> + "camnoc_rt_vfe0",
> + "camnoc_rt_vfe1",
> + "camnoc_rt_vfe2",
> + "camnoc_rt_vfe_lite",
> + "cam_top_ahb",
> + "cam_top_fast_ahb",
> + "csid",
> + "csid_csiphy_rx",
> + "csiphy0",
> + "csiphy0_timer",
> + "csiphy1",
> + "csiphy1_timer",
> + "csiphy2",
> + "csiphy2_timer",
> + "csiphy3",
> + "csiphy3_timer",
> + "csiphy4",
> + "csiphy4_timer",
> + "csiphy5",
> + "csiphy5_timer",
> + "gcc_hf_axi",
> + "vfe0",
> + "vfe0_fast_ahb",
> + "vfe1",
> + "vfe1_fast_ahb",
> + "vfe2",
> + "vfe2_fast_ahb",
> + "vfe_lite",
> + "vfe_lite_ahb",
> + "vfe_lite_cphy_rx",
> + "vfe_lite_csid",
> + "qdss_debug_xo",
> + "camnoc_ipe_nps",
> + "camnoc_ofe",
> + "gcc_sf_axi",
> + "icp0",
> + "icp0_ahb",
> + "icp1",
> + "icp1_ahb",
> + "ipe_nps",
> + "ipe_nps_ahb",
> + "ipe_nps_fast_ahb",
> + "ipe_pps",
> + "ipe_pps_fast_ahb",
> + "jpeg",
> + "ofe_ahb",
> + "ofe_anchor",
> + "ofe_anchor_fast_ahb",
> + "ofe_hdr",
> + "ofe_hdr_fast_ahb",
> + "ofe_main",
> + "ofe_main_fast_ahb",
> + "vfe0_bayer",
> + "vfe0_bayer_fast_ahb",
> + "vfe1_bayer",
> + "vfe1_bayer_fast_ahb",
> + "vfe2_bayer",
> + "vfe2_bayer_fast_ahb";
> +
> + interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 457 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 657 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 475 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 456 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 664 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 702 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 413 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 416 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 417 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid_lite0",
> + "csid_lite1",
> + "csiphy0",
> + "csiphy1",
> + "csiphy2",
> + "csiphy3",
> + "csiphy4",
> + "csiphy5",
> + "vfe0",
> + "vfe1",
> + "vfe2",
> + "vfe_lite0",
> + "vfe_lite1",
> + "camnoc_nrt",
> + "camnoc_rt",
> + "icp0",
> + "icp1",
> + "jpeg_dma",
> + "jpeg_enc",
> + "rt_cdm0",
> + "rt_cdm1",
> + "rt_cdm2",
> + "rt_cdm3",
> + "rt_cdm4",
> + "tpg0",
> + "tpg1",
> + "tpg2";
> +
> + interconnects = <&gem_noc_master_appss_proc QCOM_ICC_TAG_ACTIVE_ONLY
> + &config_noc_slave_camera_cfg QCOM_ICC_TAG_ACTIVE_ONLY>,
> + <&mmss_noc_master_camnoc_hf QCOM_ICC_TAG_ALWAYS
> + &mc_virt_slave_ebi1 QCOM_ICC_TAG_ALWAYS>,
> + <&mmss_noc_master_camnoc_sf_icp QCOM_ICC_TAG_ALWAYS
> + &mc_virt_slave_ebi1 QCOM_ICC_TAG_ALWAYS>,
> + <&mmss_noc_master_camnoc_sf QCOM_ICC_TAG_ALWAYS
> + &mc_virt_slave_ebi1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "ahb",
> + "hf_mnoc",
> + "sf_icp_mnoc",
> + "sf_mnoc";
> +
> + iommus = <&apps_smmu 0x1c00 0x00>,
> + <&apps_smmu 0x18c0 0x00>,
> + <&apps_smmu 0x1980 0x00>,
> + <&apps_smmu 0x1840 0x00>,
> + <&apps_smmu 0x1800 0x00>,
> + <&apps_smmu 0x18a0 0x00>,
> + <&apps_smmu 0x1880 0x00>,
> + <&apps_smmu 0x1820 0x00>,
> + <&apps_smmu 0x1860 0x00>;
> +
> + power-domains = <&camcc_cam_cc_vfe_0_gdsc>,
> + <&camcc_cam_cc_vfe_1_gdsc>,
> + <&camcc_cam_cc_vfe_2_gdsc>,
> + <&camcc_cam_cc_titan_top_gdsc>,
> + <&camcc_cam_cc_ipe_gdsc>,
> + <&camcc_cam_cc_ofe_gdsc>;
> + power-domain-names = "vfe0",
> + "vfe1",
> + "vfe2",
> + "top",
> + "ipe",
> + "ofe";
> +
> + vdd-csiphy0-0p8-supply = <&vreg_0p8_supply>;
> + vdd-csiphy0-1p2-supply = <&vreg_1p2_supply>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + csiphy_ep0: endpoint {
> + data-lanes = <0 1>;
> + remote-endpoint = <&sensor_ep>;
> + };
> + };
> + };
> + };
> + };
>
Thanks for following up on this.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
next prev parent reply other threads:[~2025-11-16 13:50 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-14 3:29 [PATCH v6 0/5] media: qcom: camss: Add Kaanapali support Hangxiang Ma
2025-11-14 3:29 ` [PATCH v6 1/5] media: dt-bindings: Add CAMSS device for Kaanapali Hangxiang Ma
2025-11-15 11:25 ` Krzysztof Kozlowski
2025-11-16 13:50 ` Bryan O'Donoghue [this message]
2025-11-18 15:00 ` Bryan O'Donoghue
2025-11-18 18:25 ` Vijay Kumar Tumati
2025-11-18 18:44 ` Konrad Dybcio
2025-11-18 21:45 ` Vijay Kumar Tumati
2025-11-19 9:21 ` Bryan O'Donoghue
2025-11-19 13:29 ` Vijay Kumar Tumati
2025-11-14 3:29 ` [PATCH v6 2/5] media: qcom: camss: Add Kaanapali compatible camss driver Hangxiang Ma
2025-11-16 13:50 ` Bryan O'Donoghue
2025-11-14 3:29 ` [PATCH v6 3/5] media: qcom: camss: csiphy: Add support for v2.4.0 two-phase CSIPHY Hangxiang Ma
2025-11-16 13:50 ` Bryan O'Donoghue
2025-11-14 3:29 ` [PATCH v6 4/5] media: qcom: camss: csid: Add support for CSID 1080 Hangxiang Ma
2025-11-18 9:41 ` Bryan O'Donoghue
2025-11-18 22:00 ` Vijay Kumar Tumati
2025-11-18 9:43 ` Bryan O'Donoghue
2025-11-19 0:23 ` Vijay Kumar Tumati
2025-11-14 3:29 ` [PATCH v6 5/5] media: qcom: camss: vfe: Add support for VFE 1080 Hangxiang Ma
2025-11-18 9:58 ` Bryan O'Donoghue
2025-11-19 0:31 ` Vijay Kumar Tumati
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=df803cca-3133-41c8-8d74-e9ac88a4dbef@linaro.org \
--to=bryan.odonoghue@linaro.org \
--cc=aiqun.yu@oss.qualcomm.com \
--cc=andi.shyti@kernel.org \
--cc=atiya.kailany@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hangxiang.ma@oss.qualcomm.com \
--cc=jingyi.wang@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=mchehab@kernel.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=tingwei.zhang@oss.qualcomm.com \
--cc=todor.too@gmail.com \
--cc=trilok.soni@oss.qualcomm.com \
--cc=vladimir.zapolskiy@linaro.org \
--cc=yijie.yang@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).