devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
To: Krzysztof Kozlowski <krzk@kernel.org>,
	Sylvain Petinot <sylvain.petinot@foss.st.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: <linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/2] media: dt-bindings: Add ST VD55G1 camera sensor binding
Date: Mon, 31 Mar 2025 14:34:05 +0200	[thread overview]
Message-ID: <e00973c9-3817-415f-a724-faed0728cf5d@foss.st.com> (raw)
In-Reply-To: <5c7b41bb-8e4e-44b2-9fd6-b5dd9258ee4e@kernel.org>

Hi Krzysztof,

Thank you for your review. Consider everything done for V2.

On 3/29/25 06:42, Krzysztof Kozlowski wrote:
> On 28/03/2025 14:40, Benjamin Mugnier wrote:
>> +
>> +allOf:
>> +  - $ref: /schemas/media/video-interface-devices.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    const: st,st-vd55g1
> 
> Drop st. See your filename how this should be called. Anyway, filename
> must match the compatible.
> 
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  vcore-supply:
>> +    description: Digital core power supply (1.15V)
>> +
>> +  vddio-supply:
>> +    description: Digital IO power supply (1.8V)
>> +
>> +  vana-supply:
>> +    description: Analog power supply (2.8V)
>> +
>> +  reset-gpios:
>> +    description: Sensor reset active low GPIO (XSHUTDOWN)
>> +    maxItems: 1
>> +
>> +  st,leds:
>> +    description:
>> +      List sensor's GPIOs used to control strobe light sources during exposure
>> +      time. The numbers identify the sensor pin on which the illumination
>> +      system is connected. GPIOs are active-high.
>> +    $ref: /schemas/types.yaml#/definitions/uint32-array
>> +    minItems: 1
>> +    maxItems: 4
>> +    items:
>> +      minimum: 0
>> +      maximum: 3
>> +
>> +  port:
>> +    $ref: /schemas/graph.yaml#/$defs/port-base
>> +    additionalProperties: false
>> +
>> +    properties:
>> +      endpoint:
>> +        $ref: /schemas/media/video-interfaces.yaml#
>> +        unevaluatedProperties: false
>> +
>> +        properties:
>> +          data-lanes:
>> +            description:
>> +              VD55G1 only has one data lane, and must be 1.
>> +            maxItems: 1
>> +            items:
>> +              const: 1
> 
> Instead of five lines, just two:
> 
> items:
>   - const: 1
> 
> Don't repeat constraints in free form text.
> 
> 
>> +
>> +          link-frequencies:
>> +            maxItems: 1
>> +            items:
>> +              minimum: 125000000
>> +              maximum: 600000000
>> +
>> +          lane-polarities:
>> +            minItems: 1
>> +            maxItems: 2
>> +
>> +        required:
>> +          - data-lanes
>> +          - link-frequencies
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - vcore-supply
>> +  - vddio-supply
>> +  - vana-supply
>> +  - reset-gpios
>> +  - port
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/gpio/gpio.h>
>> +
>> +    i2c {
>> +        #address-cells = <1>;
>> +        #size-cells = <0>;
>> +
>> +        camera-sensor@10 {
>> +            compatible = "st,vd55g1";
> 
> And here another compatible...
> 
>> +            reg = <0x10>;
>> +
>> +            clocks = <&camera_clk_12M>;
>> +
>> +            vcore-supply = <&camera_vcore_v1v15>;
>> +            vddio-supply = <&camera_vddio_v1v8>;
>> +            vana-supply = <&camera_vana_v2v8>;
>> +
>> +            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
>> +            st,leds = <2>;
>> +
>> +            orientation = <2>;
>> +            rotation = <0>;
>> +
>> +            port {
>> +                endpoint {
>> +                    data-lanes = <1>;
>> +                    link-frequencies = /bits/ 64 <600000000>;
>> +                    remote-endpoint = <&csiphy0_ep>;
>> +                };
>> +            };
>> +        };
>> +    };
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 2286200b355bde3604607be916ef09aa88feed0e..857af27ef392b6e6865d9a545061d1b012cce07e 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -22410,6 +22410,14 @@ S:	Maintained
>>  F:	Documentation/hwmon/stpddc60.rst
>>  F:	drivers/hwmon/pmbus/stpddc60.c
>>  
>> +ST VD55G1 DRIVER
>> +M:	Benjamin Mugnier <benjamin.mugnier@foss.st.com>
>> +M:	Sylvain Petinot <sylvain.petinot@foss.st.com>
>> +L:	linux-media@vger.kernel.org
>> +S:	Maintained
>> +T:	git git://linuxtv.org/media.git
> 
> Drop, unless you push patches there. Otherwise what is the point of
> duplicating subsystem data?
> 
>> +F:	Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
>> +
>>  ST VGXY61 DRIVER
>>  M:	Benjamin Mugnier <benjamin.mugnier@foss.st.com>
>>  M:	Sylvain Petinot <sylvain.petinot@foss.st.com>
>>
> 
> 
> Best regards,
> Krzysztof

-- 
Regards,
Benjamin

  reply	other threads:[~2025-03-31 12:35 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-28 13:40 [PATCH 0/2] media: Add support for ST VD55G1 camera sensor Benjamin Mugnier
2025-03-28 13:40 ` [PATCH 1/2] media: dt-bindings: Add ST VD55G1 camera sensor binding Benjamin Mugnier
2025-03-29  5:42   ` Krzysztof Kozlowski
2025-03-31 12:34     ` Benjamin Mugnier [this message]
2025-03-28 13:40 ` [PATCH 2/2] media: i2c: Add driver for ST VD55G1 camera sensor Benjamin Mugnier
2025-03-28 18:07   ` kernel test robot
2025-03-29  5:46   ` Krzysztof Kozlowski
2025-03-31 12:34     ` Benjamin Mugnier
2025-03-29  9:16   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e00973c9-3817-415f-a724-faed0728cf5d@foss.st.com \
    --to=benjamin.mugnier@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sylvain.petinot@foss.st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).