devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@tuxon.dev>
To: Alexander Dahl <ada@thorsis.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
	Ryan Wanner <ryan.wanner@microchip.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH v2 13/16] ARM: dts: microchip: sam9x60: Add OTPC node
Date: Mon, 17 Feb 2025 11:10:36 +0200	[thread overview]
Message-ID: <e01ed1d6-32e5-4e0d-a4f3-01acde843b5a@tuxon.dev> (raw)
In-Reply-To: <20250211065304.5019-1-ada@thorsis.com>



On 11.02.2025 08:53, Alexander Dahl wrote:
> The One-Time Programmable (OTP) Memory Controller (OTPC) is the secure
> interface between the system and the OTP memory.  It also features the
> Unique Product ID (UID) registers containing a unique serial number.
> 
> See datasheet (DS60001579G) sections "7. Memories" and "23. OTP Memory
> Controller (OTPC)" for reference.
> 
> Signed-off-by: Alexander Dahl <ada@thorsis.com>
> ---
> 
> Notes:
>     v2:
>     - squashed with patch adding the clock properties
> 
>  arch/arm/boot/dts/microchip/sam9x60.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
> index 1724b79967a17..af859f0b83a0f 100644
> --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
> +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
> @@ -15,6 +15,7 @@
>  #include <dt-bindings/clock/microchip,sam9x60-pmc.h>
>  #include <dt-bindings/mfd/at91-usart.h>
>  #include <dt-bindings/mfd/atmel-flexcom.h>
> +#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>

This is not needed, atm.

>  
>  / {
>  	#address-cells = <1>;
> @@ -157,6 +158,15 @@ sdmmc1: sdio-host@90000000 {
>  			status = "disabled";
>  		};
>  
> +		otpc: efuse@eff00000 {
> +			compatible = "microchip,sam9x60-otpc", "syscon";
> +			reg = <0xeff00000 0xec>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			clocks = <&pmc PMC_TYPE_CORE SAM9X60_PMC_MAIN_RC>, <&pmc PMC_TYPE_PERIPHERAL 46>;
> +			clock-names = "main_rc_osc", "otpc_clk";
> +		};
> +
>  		apb {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;


      parent reply	other threads:[~2025-02-17  9:10 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-10 16:44 [PATCH v2 00/16] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional nvmem device Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 01/16] dt-bindings: clock: at91: Split up per SoC partially Alexander Dahl
2025-02-10 17:05   ` Krzysztof Kozlowski
2025-02-11  7:16     ` Alexander Dahl
2025-02-11  7:47       ` Krzysztof Kozlowski
2025-02-17  9:11   ` Claudiu Beznea
2025-02-17  9:47     ` Alexander Dahl
2025-02-19  8:51       ` Claudiu Beznea
2025-02-19  9:08         ` Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 02/16] ARM: dts: microchip: Use new PMC bindings Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 03/16] clk: at91: " Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 04/16] dt-bindings: clock: at91: Allow referencing main rc oscillator in DT Alexander Dahl
2025-02-10 17:07   ` Krzysztof Kozlowski
2025-02-11  7:26     ` Alexander Dahl
2025-02-11  8:01       ` Krzysztof Kozlowski
2025-02-10 16:44 ` [PATCH v2 05/16] clk: at91: Allow enabling main_rc_osc through DT Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 06/16] clk: at91: Add peripheral id for OTPC Alexander Dahl
2025-02-10 16:44 ` [PATCH v2 07/16] dt-bindings: nvmem: microchip-otpc: Add compatible for SAM9X60 Alexander Dahl
2025-02-12  9:13   ` Krzysztof Kozlowski
2025-02-10 16:44 ` [PATCH v2 08/16] dt-bindings: nvmem: microchip-otpc: Add required clocks Alexander Dahl
2025-02-10 16:59   ` Krzysztof Kozlowski
2025-02-11  7:05     ` Alexander Dahl
2025-02-11  7:50       ` Krzysztof Kozlowski
2025-02-10 16:50 ` [PATCH v2 09/16] nvmem: microchip-otpc: Avoid reading a write-only register Alexander Dahl
2025-02-11  6:47   ` Greg Kroah-Hartman
2025-02-17  9:10   ` Claudiu Beznea
2025-02-11  6:52 ` [PATCH v2 10/16] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2025-02-11  6:52   ` [PATCH v2 11/16] nvmem: microchip-otpc: Add SAM9X60 support Alexander Dahl
2025-02-11  6:52   ` [PATCH v2 12/16] ARM: dts: microchip: sama7g5: Add OTPC clocks Alexander Dahl
2025-02-17  9:10   ` [PATCH v2 10/16] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Claudiu Beznea
2025-02-11  6:53 ` [PATCH v2 13/16] ARM: dts: microchip: sam9x60: Add OTPC node Alexander Dahl
2025-02-11  6:53   ` [PATCH v2 14/16] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller Alexander Dahl
2025-02-11  6:53   ` [PATCH v2 15/16] nvmem: microchip-otpc: Enable necessary clocks Alexander Dahl
2025-02-17  9:10     ` Claudiu Beznea
2025-02-11  6:53   ` [PATCH v2 16/16] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device Alexander Dahl
2025-02-17  9:10   ` Claudiu Beznea [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e01ed1d6-32e5-4e0d-a4f3-01acde843b5a@tuxon.dev \
    --to=claudiu.beznea@tuxon.dev \
    --cc=ada@thorsis.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh@kernel.org \
    --cc=ryan.wanner@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).