devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vitor Soares <ivitro@gmail.com>
To: Lucas Stach <l.stach@pengutronix.de>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	 Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>
Cc: Vitor Soares <vitor.soares@toradex.com>,
	devicetree@vger.kernel.org,  imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH v1] arm64: dts: imx8mm: fix missing pgc_vpu_* power domain parent
Date: Tue, 09 Apr 2024 14:22:17 +0100	[thread overview]
Message-ID: <e1552a3008a30ef7ed9097b4b80cda23ccb9e840.camel@gmail.com> (raw)
In-Reply-To: <9ce35b9bb5a15891f6bd01bd54b7dc84b3ba4021.camel@pengutronix.de>

Hi Lucas,

Thanks for your feedback.

On Tue, 2024-04-09 at 11:13 +0200, Lucas Stach wrote:
> Hi Vitor,
> 
> Am Dienstag, dem 09.04.2024 um 09:58 +0100 schrieb Vitor Soares:
> > From: Vitor Soares <vitor.soares@toradex.com>
> > 
> > The pgc_vpu_* nodes miss the reference to the power domain parent,
> > leading the system to hang during the resume.
> > 
> This change is not correct. The vpumix domain is controlled through
> the
> imx8mm-vpu-blk-ctrl and must not be directly triggered by the child
> domains in order to guarantee proper power sequencing.
> 
> If the sequencing is incorrect for resume, it needs to be fixed in
> the
> blk-ctrl driver. I'll happily assist if you have any questions about
> this intricate mix between GPC and blk-ctrl hardware/drivers.
 
I'm new into the topic, so I tried to follow same approach as in imx8mp
DT. I also checked the imx8mq DT and it only have one domain for the
VPU in the GPC. It seem blk-ctrl also dependes on pgc_vpu_* to work
properly.

The blk-ctrl driver hangs on imx8m_blk_ctrl_power_on() when access the
ip registers for the soft reset. I tried to power-up the before the
soft reset, but it didn't work.

Do you have an idea how we can address this within blk-ctrl?

Best regards,
Vitor

> 
> Regards,
> Lucas
> 
> > As these PU domains are nested inside the vpumix domain, let's
> > reference
> > it accordingly. After this change, the suspend/resume is working.
> > 
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> > Cc: <stable@vger.kernel.org>
> > Closes:
> > https://lore.kernel.org/all/fccbb040330a706a4f7b34875db1d896a0bf81c8.camel@gmail.com/
> > Fixes: d39d4bb15310 ("arm64: dts: imx8mm: add GPC node")
> > Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > index 8a1b42b94dce..97d0c6d23ad8 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> > @@ -739,16 +739,19 @@ pgc_vpumix: power-domain@6 {
> >                                         pgc_vpu_g1: power-domain@7
> > {
> >                                                 #power-domain-cells
> > = <0>;
> >                                                 reg =
> > <IMX8MM_POWER_DOMAIN_VPUG1>;
> > +                                               power-domains =
> > <&pgc_vpumix>;
> >                                         };
> >  
> >                                         pgc_vpu_g2: power-domain@8
> > {
> >                                                 #power-domain-cells
> > = <0>;
> >                                                 reg =
> > <IMX8MM_POWER_DOMAIN_VPUG2>;
> > +                                               power-domains =
> > <&pgc_vpumix>;
> >                                         };
> >  
> >                                         pgc_vpu_h1: power-domain@9
> > {
> >                                                 #power-domain-cells
> > = <0>;
> >                                                 reg =
> > <IMX8MM_POWER_DOMAIN_VPUH1>;
> > +                                               power-domains =
> > <&pgc_vpumix>;
> >                                         };
> >  
> >                                         pgc_dispmix:
> > power-domain@10 {
> 


  reply	other threads:[~2024-04-09 13:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-09  8:58 [PATCH v1] arm64: dts: imx8mm: fix missing pgc_vpu_* power domain parent Vitor Soares
2024-04-09  9:13 ` Lucas Stach
2024-04-09 13:22   ` Vitor Soares [this message]
2024-04-09 14:36     ` Lucas Stach
2024-04-09 16:44       ` Vitor Soares
2024-04-10 11:01         ` Vitor Soares
2024-04-16 10:53           ` Vitor Soares
2024-04-16 16:08             ` Vitor Soares
2024-04-17  8:00               ` Lucas Stach
2024-04-17 12:12                 ` Vitor Soares

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e1552a3008a30ef7ed9097b4b80cda23ccb9e840.camel@gmail.com \
    --to=ivitro@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=vitor.soares@toradex.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).