* [PATCH v2 00/13] qcom: dts: thermal cleanups
@ 2019-03-29 10:12 Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 01/13] arm64: dts: msm8998: thermal: split address space into two Amit Kucheria
` (12 more replies)
0 siblings, 13 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
Changes since v1:
- Devices that are not associated with cooling-maps use the 'hot' type
- Remove critical trip from such devices too and restrict that type of CPUs
- For 8916, add the sensor on the modem
Description:
- Expose all temperature sensors on msm8916, msm996, msm8998, sdm845
- split up the register address map for msm8998
- standardize names of the various thermal-zones across boards to make it
easy for test scripts to parse
Amit Kucheria (13):
arm64: dts: msm8998: thermal: split address space into two
arm64: dts: msm8998: efficiency is not valid property
arm64: dts: msm8916: thermal: Add sensor for modem
arm64: dts: msm8996: thermal: Add temperature sensors near major
peripherals
arm64: dts: msm8998: thermal: Fix the cpu sensor numbers
arm64: dts: msm8998: thermal: Fix the gpu sensor number
arm64: dts: msm8998: thermal: GPU has two sensors, add the second
arm64: dts: msm8998: thermal: Add temperature sensors near major
peripherals
arm64: dts: sdm845: thermal: Add temperature sensors near major
peripherals
arm64: dts: msm8998: thermal: Make trip names consistent
arm64: dts: msm8916: thermal: Make trip names consistent
arm64: dts: msm8996: thermal: Make trip names consistent
arm64: dts: msm8916: thermal: Convert camera trip type to hot
arch/arm64/boot/dts/qcom/msm8916.dtsi | 41 +++--
arch/arm64/boot/dts/qcom/msm8996.dtsi | 174 ++++++++++++++++--
arch/arm64/boot/dts/qcom/msm8998.dtsi | 242 +++++++++++++++++++++-----
arch/arm64/boot/dts/qcom/sdm845.dtsi | 205 ++++++++++++++++++++++
4 files changed, 589 insertions(+), 73 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH v2 01/13] arm64: dts: msm8998: thermal: split address space into two
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 02/13] arm64: dts: msm8998: efficiency is not valid property Amit Kucheria
` (11 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
We've earlier added support to split the register address space into TM
and SROT regions. Split up the regmap address space into two for msm8998
that has a similar register layout.
The order is important (TM before SROT) because we make an assumption
that SROT is always the second address space in order to support legacy
DTs.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 3fd0769fe648..ac25e9142cbd 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -590,17 +590,19 @@
cell-index = <0>;
};
- tsens0: thermal@10aa000 {
+ tsens0: thermal@10ab000 {
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
- reg = <0x10aa000 0x2000>;
+ reg = <0x10ab000 0x1000>, /* TM */
+ <0x10aa000 0x1000>; /* SROT */
#qcom,sensors = <12>;
#thermal-sensor-cells = <1>;
};
- tsens1: thermal@10ad000 {
+ tsens1: thermal@10ae000 {
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
- reg = <0x10ad000 0x2000>;
+ reg = <0x10ae000 0x1000>, /* TM */
+ <0x10ad000 0x1000>; /* SROT */
#qcom,sensors = <8>;
#thermal-sensor-cells = <1>;
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 02/13] arm64: dts: msm8998: efficiency is not valid property
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 01/13] arm64: dts: msm8998: thermal: split address space into two Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 03/13] arm64: dts: msm8916: thermal: Add sensor for modem Amit Kucheria
` (10 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
efficiency comes from downstream. The valid upstream property is
capacity-dmips-mhz but until we can come up with those numbers, remove
this property.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 8 --------
1 file changed, 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index ac25e9142cbd..0b6de0c29ee8 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -78,7 +78,6 @@
compatible = "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "arm,arch-cache";
@@ -97,7 +96,6 @@
compatible = "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_1: l1-icache {
compatible = "arm,arch-cache";
@@ -112,7 +110,6 @@
compatible = "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_2: l1-icache {
compatible = "arm,arch-cache";
@@ -127,7 +124,6 @@
compatible = "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
- efficiency = <1024>;
next-level-cache = <&L2_0>;
L1_I_3: l1-icache {
compatible = "arm,arch-cache";
@@ -142,7 +138,6 @@
compatible = "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "arm,arch-cache";
@@ -161,7 +156,6 @@
compatible = "arm,armv8";
reg = <0x0 0x101>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_101: l1-icache {
compatible = "arm,arch-cache";
@@ -176,7 +170,6 @@
compatible = "arm,armv8";
reg = <0x0 0x102>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_102: l1-icache {
compatible = "arm,arch-cache";
@@ -191,7 +184,6 @@
compatible = "arm,armv8";
reg = <0x0 0x103>;
enable-method = "psci";
- efficiency = <1536>;
next-level-cache = <&L2_1>;
L1_I_103: l1-icache {
compatible = "arm,arch-cache";
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 03/13] arm64: dts: msm8916: thermal: Add sensor for modem
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 01/13] arm64: dts: msm8998: thermal: split address space into two Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 02/13] arm64: dts: msm8998: efficiency is not valid property Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 04/13] arm64: dts: msm8996: thermal: Add temperature sensors near major peripherals Amit Kucheria
` (9 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
On platforms that have a modem, sensor 0 monitors the modem.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 0803ca8c02da..c8aa9a0986d2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -278,7 +278,21 @@
type = "critical";
};
};
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 0>;
+ trips {
+ modem_alert0: trip-point@0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
};
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 04/13] arm64: dts: msm8996: thermal: Add temperature sensors near major peripherals
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
` (2 preceding siblings ...)
2019-03-29 10:12 ` [PATCH v2 03/13] arm64: dts: msm8916: thermal: Add sensor for modem Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 05/13] arm64: dts: msm8998: thermal: Fix the cpu sensor numbers Amit Kucheria
` (8 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
msm8996 has a total of 21 temperature sensors. Populate DT with
information about them.
There are 2 sensors on each of the cpus - one on the top, the other
below (we only expose one on the top in DT for now). For the GPU, we
expose both, the one on the top and the one below.
Depending on the version of the silicon, sensor 2 is either placed near
the L3 cache or the venus video decoder. It would've been nice to be
able to be version-specific but we don't have DTs that differentiate the
two versions of silicon yet.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 150 ++++++++++++++++++++++++++
1 file changed, 150 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index c761269caf80..e2408ee91184 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -237,6 +237,156 @@
};
};
};
+
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ m4m-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ m4m_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ l3-or-venus-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ l3_or_venus_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster0-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cluster0_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster1-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cluster1_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ q6_dsp_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modemtx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ modemtx_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
};
timer {
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 05/13] arm64: dts: msm8998: thermal: Fix the cpu sensor numbers
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
` (3 preceding siblings ...)
2019-03-29 10:12 ` [PATCH v2 04/13] arm64: dts: msm8996: thermal: Add temperature sensors near major peripherals Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 06/13] arm64: dts: msm8998: thermal: Fix the gpu sensor number Amit Kucheria
` (7 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
The silver cluster (typically cpu0-3) are monitored by sensor IDs 1-3 on
tsens controller 0. The gold cluster (typically cpu4-7) are monitored by
sensor IDs 7-10 on tsens controller 0.
Fixes: 4449b6f248d9a1 ("arm64: dts: qcom: msm8998: Add tsens and thermal-zones")
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 0b6de0c29ee8..108a5aa146a2 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -342,7 +342,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 6>;
+ thermal-sensors = <&tsens0 1>;
trips {
cpu_alert0: trip0 {
@@ -363,7 +363,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 7>;
+ thermal-sensors = <&tsens0 2>;
trips {
cpu_alert1: trip0 {
@@ -384,7 +384,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 8>;
+ thermal-sensors = <&tsens0 3>;
trips {
cpu_alert2: trip0 {
@@ -405,7 +405,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 9>;
+ thermal-sensors = <&tsens0 4>;
trips {
cpu_alert3: trip0 {
@@ -426,7 +426,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 10>;
+ thermal-sensors = <&tsens0 7>;
trips {
cpu_alert4: trip0 {
@@ -447,7 +447,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens0 11>;
+ thermal-sensors = <&tsens0 8>;
trips {
cpu_alert5: trip0 {
@@ -468,7 +468,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens1 0>;
+ thermal-sensors = <&tsens0 9>;
trips {
cpu_alert6: trip0 {
@@ -489,7 +489,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens1 1>;
+ thermal-sensors = <&tsens0 10>;
trips {
cpu_alert7: trip0 {
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 06/13] arm64: dts: msm8998: thermal: Fix the gpu sensor number
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
` (4 preceding siblings ...)
2019-03-29 10:12 ` [PATCH v2 05/13] arm64: dts: msm8998: thermal: Fix the cpu sensor numbers Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 07/13] arm64: dts: msm8998: thermal: GPU has two sensors, add the second Amit Kucheria
` (6 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
The GPU sensor is sensor ID 13 on controller 0
Fixes: 4449b6f248d9a1 ("arm64: dts: qcom: msm8998: Add tsens and thermal-zones")
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 108a5aa146a2..56ca9ecdb0bf 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -510,7 +510,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
- thermal-sensors = <&tsens1 3>;
+ thermal-sensors = <&tsens0 13>;
};
};
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 07/13] arm64: dts: msm8998: thermal: GPU has two sensors, add the second
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
` (5 preceding siblings ...)
2019-03-29 10:12 ` [PATCH v2 06/13] arm64: dts: msm8998: thermal: Fix the gpu sensor number Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 08/13] arm64: dts: msm8998: thermal: Add temperature sensors near major peripherals Amit Kucheria
` (5 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
The first sensor is on top and the second sensor below the GPU
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 25 ++++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 56ca9ecdb0bf..b368da235663 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -506,11 +506,34 @@
};
};
- gpu-thermal {
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-top {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 13>;
+
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
};
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 08/13] arm64: dts: msm8998: thermal: Add temperature sensors near major peripherals
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
` (6 preceding siblings ...)
2019-03-29 10:12 ` [PATCH v2 07/13] arm64: dts: msm8998: thermal: GPU has two sensors, add the second Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 09/13] arm64: dts: sdm845: " Amit Kucheria
` (4 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
msm8998 has a total of 22 temperature sensors. Populate DT with
information about them.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 135 ++++++++++++++++++++++++++
1 file changed, 135 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index b368da235663..26e476078cb6 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -535,6 +535,141 @@
};
};
};
+
+ cluster0-mhm-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cluster0_mhm_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster1-mhm-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cluster1_mhm_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster1-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cluster1_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ modem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ wlan_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ q6_dsp_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ multimedia-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ multimedia_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
};
timer {
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 09/13] arm64: dts: sdm845: thermal: Add temperature sensors near major peripherals
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
` (7 preceding siblings ...)
2019-03-29 10:12 ` [PATCH v2 08/13] arm64: dts: msm8998: thermal: Add temperature sensors near major peripherals Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 10/13] arm64: dts: msm8998: thermal: Make trip names consistent Amit Kucheria
` (3 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
sdm845 has a total of 21 temperature sensors. Populate DT with
information about them.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 205 +++++++++++++++++++++++++++
1 file changed, 205 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 5308f1671824..7c0643ccef18 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2611,5 +2611,210 @@
};
};
};
+
+ aoss0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ aoss0_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cluster0_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cluster0_crit: cluster0_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cluster1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cluster1_crit: cluster1_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ aoss1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ q6_modem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ wlan_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-hvx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ q6_hvx_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ video_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ modem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
};
};
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 10/13] arm64: dts: msm8998: thermal: Make trip names consistent
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
` (8 preceding siblings ...)
2019-03-29 10:12 ` [PATCH v2 09/13] arm64: dts: sdm845: " Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 11/13] arm64: dts: msm8916: " Amit Kucheria
` (2 subsequent siblings)
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
Maintain naming consistency with what was landed for sdm845. Simplifies
parsing for test tools.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 48 +++++++++++++--------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 26e476078cb6..998017d4d847 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -338,20 +338,20 @@
};
thermal-zones {
- cpu-thermal0 {
+ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 1>;
trips {
- cpu_alert0: trip0 {
+ cpu0_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu0_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -359,20 +359,20 @@
};
};
- cpu-thermal1 {
+ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 2>;
trips {
- cpu_alert1: trip0 {
+ cpu1_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -380,20 +380,20 @@
};
};
- cpu-thermal2 {
+ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert2: trip0 {
+ cpu2_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit2: trip1 {
+ cpu2_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -401,20 +401,20 @@
};
};
- cpu-thermal3 {
+ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 4>;
trips {
- cpu_alert3: trip0 {
+ cpu3_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit3: trip1 {
+ cpu3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -422,20 +422,20 @@
};
};
- cpu-thermal4 {
+ cpu4-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 7>;
trips {
- cpu_alert4: trip0 {
+ cpu4_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit4: trip1 {
+ cpu4_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -443,20 +443,20 @@
};
};
- cpu-thermal5 {
+ cpu5-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert5: trip0 {
+ cpu5_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit5: trip1 {
+ cpu5_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -464,20 +464,20 @@
};
};
- cpu-thermal6 {
+ cpu6-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 9>;
trips {
- cpu_alert6: trip0 {
+ cpu6_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit6: trip1 {
+ cpu6_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -485,20 +485,20 @@
};
};
- cpu-thermal7 {
+ cpu7-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert7: trip0 {
+ cpu7_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit7: trip1 {
+ cpu7_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 11/13] arm64: dts: msm8916: thermal: Make trip names consistent
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
` (9 preceding siblings ...)
2019-03-29 10:12 ` [PATCH v2 10/13] arm64: dts: msm8998: thermal: Make trip names consistent Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 12/13] arm64: dts: msm8996: " Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 13/13] arm64: dts: msm8916: thermal: Convert camera trip type to hot Amit Kucheria
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
Maintain naming consistency with what was landed for sdm845. Simplifies
parsing for test tools.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index c8aa9a0986d2..ea734b98ec96 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -180,19 +180,19 @@
};
thermal-zones {
- cpu-thermal0 {
+ cpu0_1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 4>;
trips {
- cpu_alert0: trip0 {
+ cpu0_1_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu0_1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -201,7 +201,7 @@
cooling-maps {
map0 {
- trip = <&cpu_alert0>;
+ trip = <&cpu0_1_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -210,19 +210,19 @@
};
};
- cpu-thermal1 {
+ cpu2_3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 3>;
trips {
- cpu_alert1: trip0 {
+ cpu2_3_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu2_3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -231,7 +231,7 @@
cooling-maps {
map0 {
- trip = <&cpu_alert1>;
+ trip = <&cpu2_3_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -247,12 +247,12 @@
thermal-sensors = <&tsens 2>;
trips {
- gpu_alert: trip0 {
+ gpu_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- gpu_crit: trip1 {
+ gpu_crit: gpu_crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@@ -267,12 +267,12 @@
thermal-sensors = <&tsens 1>;
trips {
- cam_alert: trip0 {
+ cam_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cam_crit: trip1 {
+ cam_crit: cam_crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 12/13] arm64: dts: msm8996: thermal: Make trip names consistent
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
` (10 preceding siblings ...)
2019-03-29 10:12 ` [PATCH v2 11/13] arm64: dts: msm8916: " Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 13/13] arm64: dts: msm8916: thermal: Convert camera trip type to hot Amit Kucheria
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
Maintain naming consistency with what was landed for sdm845. Simplifies
parsing for test tools.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index e2408ee91184..edcddc74a4fc 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -154,20 +154,20 @@
};
thermal-zones {
- cpu-thermal0 {
+ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert0: trip0 {
+ cpu0_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu0_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -175,20 +175,20 @@
};
};
- cpu-thermal1 {
+ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
trips {
- cpu_alert1: trip0 {
+ cpu1_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -196,20 +196,20 @@
};
};
- cpu-thermal2 {
+ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert2: trip0 {
+ cpu2_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit2: trip1 {
+ cpu2_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -217,20 +217,20 @@
};
};
- cpu-thermal3 {
+ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert3: trip0 {
+ cpu3_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit3: trip1 {
+ cpu3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH v2 13/13] arm64: dts: msm8916: thermal: Convert camera trip type to hot
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
` (11 preceding siblings ...)
2019-03-29 10:12 ` [PATCH v2 12/13] arm64: dts: msm8996: " Amit Kucheria
@ 2019-03-29 10:12 ` Amit Kucheria
12 siblings, 0 replies; 14+ messages in thread
From: Amit Kucheria @ 2019-03-29 10:12 UTC (permalink / raw)
To: linux-kernel, linux-arm-msm, bjorn.andersson, edubezval,
andy.gross, David Brown
Cc: devicetree
We don't have any cooling-devices related to the camera. Use the "hot"
trip type so allow the temperature to be exported to userspace and
remove the "critical" trip.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index ea734b98ec96..e4b1010f70b6 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -270,12 +270,7 @@
cam_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
- type = "passive";
- };
- cam_crit: cam_crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
+ type = "hot";
};
};
};
--
2.17.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
end of thread, other threads:[~2019-03-29 10:12 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-03-29 10:12 [PATCH v2 00/13] qcom: dts: thermal cleanups Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 01/13] arm64: dts: msm8998: thermal: split address space into two Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 02/13] arm64: dts: msm8998: efficiency is not valid property Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 03/13] arm64: dts: msm8916: thermal: Add sensor for modem Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 04/13] arm64: dts: msm8996: thermal: Add temperature sensors near major peripherals Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 05/13] arm64: dts: msm8998: thermal: Fix the cpu sensor numbers Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 06/13] arm64: dts: msm8998: thermal: Fix the gpu sensor number Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 07/13] arm64: dts: msm8998: thermal: GPU has two sensors, add the second Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 08/13] arm64: dts: msm8998: thermal: Add temperature sensors near major peripherals Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 09/13] arm64: dts: sdm845: " Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 10/13] arm64: dts: msm8998: thermal: Make trip names consistent Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 11/13] arm64: dts: msm8916: " Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 12/13] arm64: dts: msm8996: " Amit Kucheria
2019-03-29 10:12 ` [PATCH v2 13/13] arm64: dts: msm8916: thermal: Convert camera trip type to hot Amit Kucheria
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).