Re: [PATCH v2 5/7] clk: qcom: gcc-msm8916: move gcc_mss_q6_bimc_axi_clk down

[Konrad Dybcio <konrad.dybcio@somainline.org>]

On 19.06.2022 23:25, Dmitry Baryshkov wrote:
> The gcc_mss_q6_bimc_axi_clk clock depends on the bimc_ddr_clk_src clock.
> Move it down in the file to come after the source clock.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
>  drivers/clk/qcom/gcc-msm8916.c | 34 +++++++++++++++++-----------------
>  1 file changed, 17 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c
> index 7962edbdbcf6..4d726ca4b0da 100644
> --- a/drivers/clk/qcom/gcc-msm8916.c
> +++ b/drivers/clk/qcom/gcc-msm8916.c
> @@ -2594,23 +2594,6 @@ static struct clk_branch gcc_mss_cfg_ahb_clk = {
>  	},
>  };
>  
> -static struct clk_branch gcc_mss_q6_bimc_axi_clk = {
> -	.halt_reg = 0x49004,
> -	.clkr = {
> -		.enable_reg = 0x49004,
> -		.enable_mask = BIT(0),
> -		.hw.init = &(struct clk_init_data){
> -			.name = "gcc_mss_q6_bimc_axi_clk",
> -			.parent_names = (const char *[]){
> -				"bimc_ddr_clk_src",
> -			},
> -			.num_parents = 1,
> -			.flags = CLK_SET_RATE_PARENT,
> -			.ops = &clk_branch2_ops,
> -		},
> -	},
> -};
> -
>  static struct clk_branch gcc_oxili_ahb_clk = {
>  	.halt_reg = 0x59028,
>  	.clkr = {
> @@ -2860,6 +2843,23 @@ static struct clk_branch gcc_bimc_gpu_clk = {
>  	},
>  };
>  
> +static struct clk_branch gcc_mss_q6_bimc_axi_clk = {
> +	.halt_reg = 0x49004,
> +	.clkr = {
> +		.enable_reg = 0x49004,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gcc_mss_q6_bimc_axi_clk",
> +			.parent_names = (const char *[]){
> +				"bimc_ddr_clk_src",
> +			},
> +			.num_parents = 1,
> +			.flags = CLK_SET_RATE_PARENT,
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
>  static struct clk_branch gcc_jpeg_tbu_clk = {
>  	.halt_reg = 0x12034,
>  	.clkr = {