From mboxrd@z Thu Jan 1 00:00:00 1970 From: Amit Kucheria Subject: [PATCH v2 01/13] arm64: dts: msm8998: thermal: split address space into two Date: Fri, 29 Mar 2019 15:42:07 +0530 Message-ID: References: Return-path: In-Reply-To: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, bjorn.andersson@linaro.org, edubezval@gmail.com, andy.gross@linaro.org, David Brown Cc: devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org We've earlier added support to split the register address space into TM and SROT regions. Split up the regmap address space into two for msm8998 that has a similar register layout. The order is important (TM before SROT) because we make an assumption that SROT is always the second address space in order to support legacy DTs. Signed-off-by: Amit Kucheria --- arch/arm64/boot/dts/qcom/msm8998.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 3fd0769fe648..ac25e9142cbd 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -590,17 +590,19 @@ cell-index = <0>; }; - tsens0: thermal@10aa000 { + tsens0: thermal@10ab000 { compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10aa000 0x2000>; + reg = <0x10ab000 0x1000>, /* TM */ + <0x10aa000 0x1000>; /* SROT */ #qcom,sensors = <12>; #thermal-sensor-cells = <1>; }; - tsens1: thermal@10ad000 { + tsens1: thermal@10ae000 { compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10ad000 0x2000>; + reg = <0x10ae000 0x1000>, /* TM */ + <0x10ad000 0x1000>; /* SROT */ #qcom,sensors = <8>; #thermal-sensor-cells = <1>; -- 2.17.1