Devicetree
 help / color / mirror / Atom feed
From: Shawn Lin <shawn.lin@linux.dev>
To: Kamal Dasu <kamal.dasu@broadcom.com>,
	linux-mmc@vger.kernel.org, Ulf Hansson <ulfh@kernel.org>
Cc: shawn.lin@linux.dev, Ulf Hansson <ulf.hansson@oss.qualcomm.com>,
	Adrian Hunter <adrian.hunter@intel.com>,
	Florian Fainelli <florian.fainelli@broadcom.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: Re: [PATCH v11 6/6] mmc: core: Add support for resetting an eMMC at system resume
Date: Mon, 2 Nov 2026 15:20:28 +0800	[thread overview]
Message-ID: <e27b69ed-7444-49ac-99d2-dd78f2ef8b9c@linux.dev> (raw)
In-Reply-To: <20261030181034.3811225-7-kamal.dasu@broadcom.com>

在 2026/10/31 星期六 2:10, Kamal Dasu 写道:
> From: Ulf Hansson <ulf.hansson@oss.qualcomm.com>
> 
> The DT property reset-card-at-resume specifies that we need to make a reset
> of an eMMC card at system resume, assuming it also has stayed powered on
> during system suspend.
> 
> To implement support for this, let's start by parsing for the new DT
> property and set the new bit MMC_CAP2_RESET_AT_RESUME if it's found. Based
> on the property, we must also set MMC_PM_KEEP_POWER in the pm_flags for the
> host, to keep the eMMC powered on during system suspend.
> 
> Finally, to manage the actual reset during system resume, let's extend
> mmc_resume() to support the needed behaviour.
> 
> The property only makes sense together with keep-power-in-suspend, as the
> card would otherwise be powered off and system suspend is refused. Warn
> about that while parsing the DT properties, to flag the misconfiguration
> upfront. While at it, claim the host around the reset in mmc_resume(), as
> it sends commands to the card.
> 
> Signed-off-by: Ulf Hansson <ulf.hansson@oss.qualcomm.com>
> Co-developed-by: Kamal Dasu <kamal.dasu@broadcom.com>
> Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
> ---
>   drivers/mmc/core/host.c  | 13 +++++++++++++
>   drivers/mmc/core/mmc.c   |  8 ++++++++
>   include/linux/mmc/host.h |  1 +
>   3 files changed, 22 insertions(+)
> 
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index 8e9e61839198..8b38ff45d20f 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -48,6 +48,14 @@ static int mmc_host_class_prepare(struct device *dev)
>   	if (host->bus_ops->pre_suspend)
>   		return host->bus_ops->pre_suspend(host);
>   
> +	/*
> +	 * If it's required to make a reset of the card at system resume, this
> +	 * indirectly also means that we must keep the card powered on during
> +	 * system suspend.
> +	 */
> +	if (host->caps2 & MMC_CAP2_RESET_AT_RESUME)
> +		return mmc_set_host_pm_flags(host, MMC_PM_KEEP_POWER);
> +
>   	return 0;
>   }
>   
> @@ -375,6 +383,11 @@ int mmc_of_parse(struct mmc_host *host)
>   		host->pm_caps |= MMC_PM_KEEP_POWER;
>   	if (device_property_read_bool(dev, "wakeup-source"))
>   		host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
> +	if (device_property_read_bool(dev, "reset-card-at-resume")) {
> +		host->caps2 |= MMC_CAP2_RESET_AT_RESUME;
> +		if (!(host->pm_caps & MMC_PM_KEEP_POWER))
> +			dev_warn(dev, "reset-card-at-resume without keep-power-in-suspend, system suspend will fail\n");

No strong opinion on this log, but we set MMC_PM_KEEP_POWER if
reset-card-at-resume is present anyway, could the suspend fail?

> +	}
>   	if (device_property_read_bool(dev, "mmc-ddr-3_3v"))
>   		host->caps |= MMC_CAP_3_3V_DDR;
>   	if (device_property_read_bool(dev, "mmc-ddr-1_8v"))
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 026003ba507d..a9e3cf7ae039 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -2320,6 +2320,14 @@ static int mmc_resume(struct mmc_host *host)
>   	}
>   
>   	pm_runtime_enable(&host->card->dev);
> +
> +	if (mmc_card_keep_power(host) &&
> +	    host->caps2 & MMC_CAP2_RESET_AT_RESUME) {
> +		mmc_claim_host(host);
> +		_mmc_hw_reset(host);
> +		mmc_release_host(host);
> +	}
> +
>   	host->pm_flags &= ~MMC_PM_KEEP_POWER;
>   	return 0;
>   }
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 032c018650e0..3c0ea74e3e35 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -430,6 +430,7 @@ struct mmc_host {
>   	u32			caps2;		/* More host capabilities */
>   
>   #define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
> +#define MMC_CAP2_RESET_AT_RESUME BIT(1)	/* Reset the card at system resume */
>   #define MMC_CAP2_FULL_PWR_CYCLE	(1 << 2)	/* Can do full power cycle */
>   #define MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND (1 << 3) /* Can do full power cycle in suspend */
>   #define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */


      parent reply	other threads:[~2026-11-02  7:20 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-30 18:10 [PATCH v11 0/6] mmc: core: Keep the card powered across suspend when firmware needs it live Kamal Dasu
2026-10-30 18:10 ` [PATCH v11 1/6] dt-bindings: mmc: Extend keep-power-in-suspend beyond SDIO Kamal Dasu
2026-10-30 18:10 ` [PATCH v11 2/6] dt-bindings: mmc: Add reset-card-at-resume property Kamal Dasu
2026-10-30 18:10 ` [PATCH v11 3/6] mmc: core: Add option to keep an eMMC powered on at system suspend Kamal Dasu
2026-10-30 18:10 ` [PATCH v11 4/6] mmc: core: Split sdio_set_host_pm_flags() Kamal Dasu
2026-11-02  6:52   ` Shawn Lin
2026-10-30 18:10 ` [PATCH v11 5/6] mmc: core: Move and split reset functions for eMMC Kamal Dasu
2026-10-30 18:10 ` [PATCH v11 6/6] mmc: core: Add support for resetting an eMMC at system resume Kamal Dasu
2026-10-30 18:29   ` sashiko-bot
2026-11-02  7:20   ` Shawn Lin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e27b69ed-7444-49ac-99d2-dd78f2ef8b9c@linux.dev \
    --to=shawn.lin@linux.dev \
    --cc=adrian.hunter@intel.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=florian.fainelli@broadcom.com \
    --cc=kamal.dasu@broadcom.com \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=krzysztof.kozlowski@oss.qualcomm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=ulf.hansson@oss.qualcomm.com \
    --cc=ulfh@kernel.org \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox