From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>,
Chen-Yu Tsai <wens@csie.org>,
Maxime Ripard <maxime.ripard@bootlin.com>
Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/10] dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
Date: Mon, 27 May 2019 14:00:36 +0200 [thread overview]
Message-ID: <e345cb06e54ce80db07e96c2cf2ef51794130585.1558958381.git-series.maxime.ripard@bootlin.com> (raw)
In-Reply-To: <290402405a34506997fd2fab2c4c1486dbe6b7e5.1558958381.git-series.maxime.ripard@bootlin.com>
The newer Allwinner SoCs have an embedded RTC supported in Linux, with a
matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml | 112 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
Documentation/devicetree/bindings/rtc/sun6i-rtc.txt | 46 +------------------------------
2 files changed, 112 insertions(+), 46 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
delete mode 100644 Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
diff --git a/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
new file mode 100644
index 000000000000..942ddfc1689d
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/allwinner,sun6i-a31-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 RTC Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ "#clock-cells":
+ const: 1
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun6i-a31-rtc
+ - const: allwinner,sun8i-a23-rtc
+ - const: allwinner,sun8i-h3-rtc
+ - const: allwinner,sun8i-v3-rtc
+ - const: allwinner,sun50i-h5-rtc
+ - items:
+ - const: allwinner,sun50i-a64-rtc
+ - const: allwinner,sun8i-h3-rtc
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: RTC Alarm 0
+ - description: RTC Alarm 1
+
+ clocks:
+ maxItems: 1
+
+ clock-output-names:
+ minItems: 1
+ maxItems: 3
+ description:
+ The RTC provides up to three clocks
+ - the Low Frequency Oscillator or LOSC, at index 0,
+ - the Low Frequency Oscillator External output (X32KFOUT in
+ the datasheet), at index 1,
+ - the Internal Oscillator, at index 2.
+
+allOf:
+ - $ref: "rtc.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun6i-a31-rtc
+
+ then:
+ properties:
+ clock-output-names:
+ minItems: 1
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-a23-rtc
+ - allwinner,sun8i-v3-rtc
+
+ then:
+ properties:
+ clock-output-names:
+ minItems: 2
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-h3-rtc
+ - allwinner,sun50i-h5-rtc
+
+ then:
+ properties:
+ clock-output-names:
+ minItems: 3
+ maxItems: 3
+
+required:
+ - "#clock-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-output-names
+
+additionalProperties: false
+
+examples:
+ - |
+ rtc: rtc@1f00000 {
+ compatible = "allwinner,sun6i-a31-rtc";
+ reg = <0x01f00000 0x400>;
+ interrupts = <0 40 4>, <0 41 4>;
+ clock-output-names = "osc32k";
+ clocks = <&ext_osc32k>;
+ #clock-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
deleted file mode 100644
index 6b732c41392b..000000000000
--- a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* sun6i Real Time Clock
-
-RTC controller for the Allwinner A31
-
-Required properties:
-- compatible : Should be one of the following combinations:
- - "allwinner,sun6i-a31-rtc"
- - "allwinner,sun8i-a23-rtc"
- - "allwinner,sun8i-h3-rtc"
- - "allwinner,sun8i-r40-rtc", "allwinner,sun8i-h3-rtc"
- - "allwinner,sun8i-v3-rtc"
- - "allwinner,sun50i-a64-rtc", "allwinner,sun8i-h3-rtc"
- - "allwinner,sun50i-h5-rtc"
-
- Where there are two or more compatible strings, this
- denotes the hardware covered by the most specific one
- is backward-compatible with the latter ones, and the
- implementation for the latter ones can be used, albeit
- with reduced functionality.
-
-- reg : physical base address of the controller and length of
- memory mapped region.
-- interrupts : IRQ lines for the RTC alarm 0 and alarm 1, in that order.
-
-Required properties for new device trees
-- clocks : phandle to the 32kHz external oscillator
-- clock-output-names : names of up to three clock outputs. See below.
-- #clock-cells : must be equal to 1.
-
-The RTC provides the following clocks at the given indices:
-- 0: LOSC
-- 1: LOSC external output, known as X32KFOUT in the datasheet.
- This clock is not available on the A31 and is deprecated for old
- device trees still using the "allwinner,sun6i-a31-rtc" compatible.
-- 2: InternalOSC, or internal RC oscillator (A64/H3/H5 only)
-
-Example:
-
-rtc: rtc@1f00000 {
- compatible = "allwinner,sun6i-a31-rtc";
- reg = <0x01f00000 0x400>;
- interrupts = <0 40 4>, <0 41 4>;
- clock-output-names = "osc32k";
- clocks = <&ext_osc32k>;
- #clock-cells = <1>;
-};
--
git-series 0.9.1
next prev parent reply other threads:[~2019-05-27 12:00 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-27 12:00 [PATCH 01/10] dt-bindings: rtc: Move trivial RTC over to trivial devices Maxime Ripard
2019-05-27 12:00 ` [PATCH 02/10] dt-bindings: rtc: Add YAML schemas for the generic RTC bindings Maxime Ripard
2019-05-27 12:00 ` [PATCH 03/10] dt-bindings: rtc: Convert Allwinner A10 RTC to a schema Maxime Ripard
2019-05-28 3:33 ` Chen-Yu Tsai
2019-05-27 12:00 ` Maxime Ripard [this message]
2019-05-28 3:37 ` [PATCH 04/10] dt-bindings: rtc: Convert Allwinner A31 " Chen-Yu Tsai
2019-05-28 3:45 ` Chen-Yu Tsai
2019-05-27 12:00 ` [PATCH 05/10] dt-bindings: rtc: sun6i: Add the R40 RTC compatible Maxime Ripard
2019-05-28 3:45 ` Chen-Yu Tsai
2019-05-27 12:00 ` [PATCH 06/10] rtc: sun6i: Add R40 compatible Maxime Ripard
2019-05-28 3:46 ` Chen-Yu Tsai
2019-05-27 12:00 ` [PATCH 07/10] ARM: dts: sun6i: Fix RTC node Maxime Ripard
2019-05-28 3:46 ` Chen-Yu Tsai
2019-05-27 12:00 ` [PATCH 08/10] ARM: dts: sun6i: Add external crystals accuracy Maxime Ripard
2019-05-28 3:35 ` Chen-Yu Tsai
2019-05-27 12:00 ` [PATCH 09/10] ARM: dts: sun8i: v3s: Fix the RTC node Maxime Ripard
2019-05-28 3:47 ` Chen-Yu Tsai
2019-05-27 12:00 ` [PATCH 10/10] ARM: dts: r40: Change the RTC compatible Maxime Ripard
2019-05-28 3:47 ` Chen-Yu Tsai
2019-05-27 12:06 ` [PATCH 01/10] dt-bindings: rtc: Move trivial RTC over to trivial devices Alexandre Belloni
2019-05-27 12:18 ` Maxime Ripard
2019-05-27 16:06 ` Alexandre Belloni
2019-05-28 12:20 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e345cb06e54ce80db07e96c2cf2ef51794130585.1558958381.git-series.maxime.ripard@bootlin.com \
--to=maxime.ripard@bootlin.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-rtc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox