Re: [PATCH v8 10/16] mmc: sdhci-msm: Implement set_clock callback for sdhci-msm

[Adrian Hunter <adrian.hunter@intel.com>]

On 16/11/16 18:00, Ritesh Harjani wrote:
> sdhci-msm controller may have different clk-rates for each
> bus speed mode. Thus implement set_clock callback for
> sdhci-msm driver.
> 
> Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
> Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
> Acked-by: Adrian Hunter <adrian.hunter@intel.com>

Yes my Ack stands.

> ---
>  drivers/mmc/host/sdhci-msm.c | 66 +++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 65 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 45ead68..6d02fc2 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -84,6 +84,7 @@ struct sdhci_msm_host {
>  	struct clk *pclk;	/* SDHC peripheral bus clock */
>  	struct clk *bus_clk;	/* SDHC bus voter clock */
>  	struct clk *xo_clk;	/* TCXO clk needed for FLL feature of cm_dll*/
> +	unsigned long clk_rate;
>  	struct mmc_host *mmc;
>  	bool use_14lpp_dll_reset;
>  };
> @@ -571,6 +572,69 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
>  	return SDHCI_MSM_MIN_CLOCK;
>  }
>  
> +/**
> + * __sdhci_msm_set_clock - sdhci_msm clock control.
> + *
> + * Description:
> + * MSM controller does not use internal divider and
> + * instead directly control the GCC clock as per
> + * HW recommendation.
> + **/
> +void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
> +{
> +	u16 clk;
> +	/*
> +	 * Keep actual_clock as zero -
> +	 * - since there is no divider used so no need of having actual_clock.
> +	 * - MSM controller uses SDCLK for data timeout calculation. If
> +	 *   actual_clock is zero, host->clock is taken for calculation.
> +	 */
> +	host->mmc->actual_clock = 0;
> +
> +	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
> +
> +	if (clock == 0)
> +		return;
> +
> +	/*
> +	 * MSM controller do not use clock divider.
> +	 * Thus read SDHCI_CLOCK_CONTROL and only enable
> +	 * clock with no divider value programmed.
> +	 */
> +	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> +	sdhci_enable_clock(host, clk);
> +}
> +
> +/* sdhci_msm_set_clock - Called with (host->lock) spinlock held. */
> +static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> +	int rc;
> +
> +	if (!clock) {
> +		msm_host->clk_rate = clock;
> +		goto out;
> +	}
> +
> +	spin_unlock_irq(&host->lock);
> +
> +	rc = clk_set_rate(msm_host->clk, clock);
> +	if (rc) {
> +		pr_err("%s: Failed to set clock at rate %u\n",
> +		       mmc_hostname(host->mmc), clock);
> +		goto out_lock;
> +	}
> +	msm_host->clk_rate = clock;
> +	pr_debug("%s: Setting clock at rate %lu\n",
> +		 mmc_hostname(host->mmc), clk_get_rate(msm_host->clk));
> +
> +out_lock:
> +	spin_lock_irq(&host->lock);
> +out:
> +	__sdhci_msm_set_clock(host, clock);
> +}
> +
>  static const struct of_device_id sdhci_msm_dt_match[] = {
>  	{ .compatible = "qcom,sdhci-msm-v4" },
>  	{},
> @@ -581,7 +645,7 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
>  static const struct sdhci_ops sdhci_msm_ops = {
>  	.platform_execute_tuning = sdhci_msm_execute_tuning,
>  	.reset = sdhci_reset,
> -	.set_clock = sdhci_set_clock,
> +	.set_clock = sdhci_msm_set_clock,
>  	.get_min_clock = sdhci_msm_get_min_clock,
>  	.get_max_clock = sdhci_msm_get_max_clock,
>  	.set_bus_width = sdhci_set_bus_width,
>