From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Mavrodiev Subject: Re: [PATCH v3 1/1] drm/panel: Add support for Olimex LCD-OLinuXino panel Date: Thu, 1 Nov 2018 16:34:42 +0200 Message-ID: References: <1531383729-13932-1-git-send-email-stefan@olimex.com> <20180716150836.GA16895@rob-hp-laptop> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180716150836.GA16895@rob-hp-laptop> Content-Language: bg Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring , Stefan Mavrodiev Cc: Thierry Reding , David Airlie , Mark Rutland , "David S. Miller" , Mauro Carvalho Chehab , Greg Kroah-Hartman , Andrew Morton , Randy Dunlap , "open list:DRM PANEL DRIVERS" , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , open list List-Id: devicetree@vger.kernel.org On 7/16/18 6:08 PM, Rob Herring wrote: > On Thu, Jul 12, 2018 at 11:21:53AM +0300, Stefan Mavrodiev wrote: >> This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The >> panel is used with different LCDs (currently from 480x272 to 1280x800). >> Small EEPROM chip is used for identification, which holds some >> factory data and timing requirements. >> >> Signed-off-by: Stefan Mavrodiev >> --- >> Changes for v3: >> - Change module license from "GPL v2" to "GPL" >> - Make use of backlight_enable()/backlight_disable() helpers >> - Rework backlight device request >> - Remove drm_panel_detach() >> - Use module_i2c_driver() for initialization >> - Make the first mode preferred >> - If num_modes value is invalid, overwrite it with 4, which is the maximum >> - Some variable types optimizations >> >> Changes for v2: >> - Changed lcd_olinuxino_funcs to static const >> >> .../display/panel/olimex,lcd-olinuxino.txt | 42 +++ > Reviewed-by: Rob Herring > >> MAINTAINERS | 6 + >> drivers/gpu/drm/panel/Kconfig | 10 + >> drivers/gpu/drm/panel/Makefile | 1 + >> drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c | 331 +++++++++++++++++++++ >> 5 files changed, 390 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.txt >> create mode 100644 drivers/gpu/drm/panel/panel-olimex-lcd-olinuxino.c I would like to ask if there will be any progress on this patch? Best regards, Stefan Mavrodiev