Re: [PATCH v8 07/11] arm64: dts: qcom: pm8150b: Add a TCPM description

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 15.05.2023 15:36, Bryan O'Donoghue wrote:
> Type-C port management functionality lives inside of the PMIC block on
> pm8150b.
> 
> The Type-C port management logic controls orientation detection, vbus/vconn
> sense and to send/receive Type-C Power Domain messages.
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/pm8150b.dtsi | 40 +++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> index 66752cc063d60..136e5f96a3d53 100644
> --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
> @@ -59,6 +59,46 @@ pm8150b_vbus: usb-vbus-regulator@1100 {
>  			reg = <0x1100>;
>  		};
>  
> +		pm8150b_typec: typec@1500 {
> +			compatible = "qcom,pm8150b-typec";
> +			status = "disabled";
> +			reg = <0x1500>,
> +			      <0x1700>;
> +			interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
> +				     <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-names = "or-rid-detect-change",
> +					  "vpd-detect",
> +					  "cc-state-change",
> +					  "vconn-oc",
> +					  "vbus-change",
> +					  "attach-detach",
> +					  "legacy-cable-detect",
> +					  "try-snk-src-detect",
> +					  "sig-tx",
> +					  "sig-rx",
> +					  "msg-tx",
> +					  "msg-rx",
> +					  "msg-tx-failed",
> +					  "msg-tx-discarded",
> +					  "msg-rx-discarded",
> +					  "fr-swap";
> +			vdd-vbus-supply = <&pm8150b_vbus>;
> +		};
> +
>  		pm8150b_temp: temp-alarm@2400 {
>  			compatible = "qcom,spmi-temp-alarm";
>  			reg = <0x2400>;