From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?utf-8?B?U8O2cmVu?= Brinkmann Subject: Re: [RFC PATCH] edac: zynq: Added EDAC support for zynq ddr ecc controller Date: Wed, 12 Mar 2014 09:13:44 -0700 Message-ID: References: <4adb2b4b-2ad6-42b9-929e-cc062f817245@TX2EHSMHS021.ehs.local> <20140310105655.GH14999@e106331-lin.cambridge.arm.com> <531DA900.5060202@monstr.eu> <531ECA33.8050803@monstr.eu> <20140311155057.GJ13293@xsjandreislx> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-doc-owner@vger.kernel.org To: Michal Simek Cc: Michal Simek , Mark Rutland , Punnaiah Choudary Kalluri , "dougthompson@xmission.com" , "devicetree@vger.kernel.org" , "linux-doc@vger.kernel.org" , "linux-arm-kernel@lists.infradead.org" , "linux-kernel@vger.kernel.org" , "linux-edac@vger.kernel.org" , "robh+dt@kernel.org" , Pawel Moll , "ijc+devicetree@hellion.org.uk" , "galak@codeaurora.org" , "rob@landley.net" , "kpc528@gmail.com" , "kalluripunnaiahchoudary@gmail.com" "punnaia@xilinx.com" List-Id: devicetree@vger.kernel.org On Wed, 2014-03-12 at 11:27AM +0100, Michal Simek wrote: > On 03/11/2014 04:50 PM, S=C3=B6ren Brinkmann wrote: > > On Tue, 2014-03-11 at 09:32AM +0100, Michal Simek wrote: > >> On 03/10/2014 11:32 PM, S=C3=B6ren Brinkmann wrote: > >>> On Mon, 2014-03-10 at 12:58PM +0100, Michal Simek wrote: > >>>> On 03/10/2014 11:56 AM, Mark Rutland wrote: > >>>>> On Sun, Mar 09, 2014 at 02:57:16AM +0000, Punnaiah Choudary Kal= luri wrote: > >>>>>> Added EDAC support for reporting the ecc errors of zynq ddr co= ntroller. > >>>>>> The ddr ecc controller corrects single bit errors and detects = double bit > >>>>>> errors > >>>>>> > >>>>>> Signed-off-by: Punnaiah Choudary Kalluri > >>>>>> --- > >>>>>> .../devicetree/bindings/edac/zynq_edac.txt | 18 + > >>>>>> drivers/edac/Kconfig | 7 + > >>>>>> drivers/edac/Makefile | 1 + > >>>>>> drivers/edac/zynq_edac.c | 613 +++= +++++++++++++++++ > >>>>>> 4 files changed, 639 insertions(+), 0 deletions(-) > >>>>>> create mode 100644 Documentation/devicetree/bindings/edac/zyn= q_edac.txt > >>>>>> create mode 100644 drivers/edac/zynq_edac.c > >>>>>> > >>>>>> diff --git a/Documentation/devicetree/bindings/edac/zynq_edac.= txt b/Documentation/devicetree/bindings/edac/zynq_edac.txt > >>>>>> new file mode 100644 > >>>>>> index 0000000..c21ff83 > >>>>>> --- /dev/null > >>>>>> +++ b/Documentation/devicetree/bindings/edac/zynq_edac.txt > >>>>>> @@ -0,0 +1,18 @@ > >>>>>> +Zynq EDAC driver, it does reports the DDR ECC single bit erro= rs that are > >>>>>> +corrected and double bit ecc errors that are detected by the = DDR ECC controller. > >>>>>> +ECC support for DDR is available in half-bus width(16 bit) co= nfiguration only. > >>>>>> + > >>>>>> +Required properties: > >>>>>> +- compatible: Should be "xlnx,ps7-ddrc" or "xlnx,ps7-ddrc-1.0= 0.a" > >>>>> > >>>>> Is this an or or a xor? > >>>> > >>>> Compatible string should be just xlnx,zynq-ddrc-1.00.a. > >>>> Nothing with ps7. > >>> > >>> Isn't this vendor IP? IMHO, this should be something completely > >>> different. Or if you want some Zynq-specific compat string it sho= uld > >>> refer to an actual version string associated with Zynq. 1.00.a is= not, > >>> AFAIK. > >> > >> I have checked with Punnaiah that this is Synopsys DDR memory cont= roller. > >> Zynq is based on 1.4 version with some customization. > >> It means I think reasonable solution is > >> call it drivers/edac/synopsys_edac.c > >> rename zynq_ in driver to synopsys_ and > >> use xlnx,zynq-ddrc-1.00.a compatible string because zynq is not us= ing > >> clean synopsys version. > >> > >> I am not getting point why you don't like 1.00.a suffix here. > >> Because of historical point of view compatible strings should be d= ifferent > >> for early silicon, silicon v1, silicon v2, silicon v3, etc > >> but we haven't used it at all that's why we can use xilinx scheme > >> which we are using for our soft IPs. > >=20 > > Well, but you refer to Zynq which has silicon revisions you can use= to > > refer to a specific Zynq version. That matches data sheets. Zynq-1.= 00.a > > is just completely made up and wouldn't be found in any data sheet. >=20 > I didn't reply this one but we discussed this with Soren over phone. > No problem to use Synopsys version A07 according TRM. >=20 > Then compatible string is > xlnx,zynq-ddrc-A07 and file name is synopsys_edac.c This seems to make sense. I'm never sure whether leading zeros are actually needed and tend to remove them, but in general this looks like a reasonable string to identify Zynq's DDR controller. S=C3=B6ren