From: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
To: Guochun Mao <guochun.mao@mediatek.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Richard Weinberger <richard@nod.at>,
Russell King <linux@armlinux.org.uk>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-mtd@lists.infradead.org,
Matthias Brugger <matthias.bgg@gmail.com>,
linux-mediatek@lists.infradead.org,
Cyrille Pitchen <cyrille.pitchen@atmel.com>,
David Woodhouse <dwmw2@infradead.org>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v1 1/1] mtd: mtk-nor: set controller's address width according to nor flash
Date: Sun, 16 Apr 2017 19:18:18 +0200 [thread overview]
Message-ID: <e78dba15-80d0-f2c3-c963-a7eb033af58d@wedev4u.fr> (raw)
In-Reply-To: <3cf1c63e-c56f-2f07-9d16-7ec346758dfa@wedev4u.fr>
Le 13/04/2017 à 10:24, Cyrille Pitchen a écrit :
> Hi Guochun,
>
> Le 13/04/2017 à 04:40, Guochun Mao a écrit :
>> Hi Cyrille,
>>
>> On Wed, 2017-04-12 at 22:57 +0200, Cyrille Pitchen wrote:
>>> Hi Guochun,
>>>
>>> Le 05/04/2017 à 10:37, Guochun Mao a écrit :
>>>> When nor's size larger than 16MByte, nor's address width maybe
>>>> set to 3 or 4, and controller should change address width according
>>>> to nor's setting.
>>>>
>>>> Signed-off-by: Guochun Mao <guochun.mao@mediatek.com>st
>
> Acked-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
>
Applied to github/spi-nor
Thanks!
>>>> ---
>>>> drivers/mtd/spi-nor/mtk-quadspi.c | 27 +++++++++++++++++++++++++++
>>>> 1 file changed, 27 insertions(+)
>>>>
>>>> diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c
>>>> index e661877..b637770 100644
>>>> --- a/drivers/mtd/spi-nor/mtk-quadspi.c
>>>> +++ b/drivers/mtd/spi-nor/mtk-quadspi.c
>>>> @@ -104,6 +104,8 @@
>>>> #define MTK_NOR_MAX_RX_TX_SHIFT 6
>>>> /* can shift up to 56 bits (7 bytes) transfer by MTK_NOR_PRG_CMD */
>>>> #define MTK_NOR_MAX_SHIFT 7
>>>> +/* nor controller 4-byte address mode enable bit */
>>>> +#define MTK_NOR_4B_ADDR_EN BIT(4)
>>>>
>>>> /* Helpers for accessing the program data / shift data registers */
>>>> #define MTK_NOR_PRG_REG(n) (MTK_NOR_PRGDATA0_REG + 4 * (n))
>>>> @@ -230,10 +232,35 @@ static int mt8173_nor_write_buffer_disable(struct mt8173_nor *mt8173_nor)
>>>> 10000);
>>>> }
>>>>
>>>> +static void mt8173_nor_set_addr_width(struct mt8173_nor *mt8173_nor)
>>>> +{
>>>> + u8 val;
>>>> + struct spi_nor *nor = &mt8173_nor->nor;
>>>> +
>>>> + val = readb(mt8173_nor->base + MTK_NOR_DUAL_REG);
>>>> +
>>>> + switch (nor->addr_width) {
>>>> + case 3:
>>>> + val &= ~MTK_NOR_4B_ADDR_EN;
>>>> + break;
>>>> + case 4:
>>>> + val |= MTK_NOR_4B_ADDR_EN;
>>>> + break;
>>>> + default:
>>>> + dev_warn(mt8173_nor->dev, "Unexpected address width %u.\n",
>>>> + nor->addr_width);
>>>> + break;
>>>> + }
>>>> +
>>>> + writeb(val, mt8173_nor->base + MTK_NOR_DUAL_REG);
>>>> +}
>>>> +
>>>> static void mt8173_nor_set_addr(struct mt8173_nor *mt8173_nor, u32 addr)
>>>> {
>>>> int i;
>>>>
>>>> + mt8173_nor_set_addr_width(mt8173_nor);
>>>> +
>>>> for (i = 0; i < 3; i++) {
>>>
>>> Should it be 'i < nor->addr_width' instead of 'i < 3' ?
>>> Does it work when accessing data after 128Mbit ?
>>
>> Yes, it can work.
>>
>> Let's see the whole function,
>>
>> static void mt8173_nor_set_addr(struct mt8173_nor *mt8173_nor, u32 addr)
>> {
>> int i;
>>
>> mt8173_nor_set_addr_width(mt8173_nor);
>>
>> for (i = 0; i < 3; i++) {
>> writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR0_REG
>> + i * 4);
>> addr >>= 8;
>> }
>> /* Last register is non-contiguous */
>> writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR3_REG);
>> }
>>
>> The nor controller has 4 registers for address.
>> This '3' indicates the number of contiguous address' registers
>> base + MTK_NOR_RADR0_REG(0x10)
>> base + MTK_NOR_RADR1_REG(0x14)
>> base + MTK_NOR_RADR2_REG(0x18),
>> but the last address register is non-contiguous,
>> it's base + MTK_NOR_RADR3_REG(0xc8)
>>
>> mt8173_nor_set_addr will set addr into these 4 registers by Byte.
>> The bit MTK_NOR_4B_ADDR_EN will decide whether 3-byte(0x10,0x14,0x18)
>> or 4-byte(0x10,0x14,x018,0xc8) been sent to nor device.
>> and, it can access data after 128Mbit when sent 4-byte address.
>
> Indeed, you're right. Sorry for the noise!
>
>>
>> Best regards,
>>
>> Guochun
>>
>>>
>>> Best regards,
>>>
>>> Cyrille
>>>
>>>> writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR0_REG + i * 4);
>>>> addr >>= 8;
>>>>
>>>
>>
>>
>>
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2017-04-16 17:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-05 8:37 [PATCH v1] mtd: mtk-nor: set controller's address width according to nor flas Guochun Mao
[not found] ` <1491381462-21893-1-git-send-email-guochun.mao-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2017-04-05 8:37 ` [PATCH v1 1/1] mtd: mtk-nor: set controller's address width according to nor flash Guochun Mao
2017-04-12 20:57 ` Cyrille Pitchen
2017-04-13 2:40 ` Guochun Mao
2017-04-13 8:24 ` Cyrille Pitchen
2017-04-16 17:18 ` Cyrille Pitchen [this message]
[not found] ` <e78dba15-80d0-f2c3-c963-a7eb033af58d-yU5RGvR974pGWvitb5QawA@public.gmane.org>
2017-04-17 3:34 ` Guochun Mao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e78dba15-80d0-f2c3-c963-a7eb033af58d@wedev4u.fr \
--to=cyrille.pitchen@wedev4u.fr \
--cc=cyrille.pitchen@atmel.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=guochun.mao@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).