Re: [PATCH v2 1/3] dt-bindings: leds: skyworks,aat1290: Document AAT1270 Current Regulator for Flash LEDs

[Jacek Anaszewski <jacek.anaszewski@gmail.com>]

On 10/13/26 8:18 PM, Svyatoslav Ryhel wrote:
> The AAT1270 Current Regulator for Flash LEDs has a similar configuration
> to the AAT1290, but it uses a different programming model and requires a
> separate compatible.
> 
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
>   .../devicetree/bindings/leds/skyworks,aat1290.yaml       | 9 ++++++---
>   1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
> index 65576dfdca110..7c26bb135c0a7 100644
> --- a/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
> +++ b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
> @@ -19,7 +19,9 @@ description: |
>   
>   properties:
>     compatible:
> -    const: skyworks,aat1290
> +    enum:
> +      - skyworks,aat1290
> +      - skyworks,aat1270
>   
>     enset-gpios:
>       maxItems: 1
> @@ -39,12 +41,13 @@ properties:
>         flash-max-microamp:
>           description: |
>             Maximum flash LED supply current can be calculated using following
> -          formula: I = 1A * 162 kOhm / Rset.
> +          formula: I = 1A * 162 kOhm / Rset (for AAT1290) and
> +          I = 1A * 81 kOhm / Rset (for AAT1270).
>   
>         flash-max-timeout-us:
>           description: |
>             Maximum flash timeout can be calculated using following formula:
> -            T = 8.82 * 10^9 * Ct.
> +          T = 8.82 * 10^9 * Ct (for AAT1290) and T = 21.5 * 10^9 * Ct (for AAT1270).
>   
>       required:
>         - flash-max-microamp

Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>

-- 
Best regards,
Jacek Anaszewski