From: <Codrin.Ciubotariu@microchip.com>
To: <alexandre.belloni@bootlin.com>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <robh+dt@kernel.org>,
<Nicolas.Ferre@microchip.com>, <Ludovic.Desroches@microchip.com>
Subject: Re: [PATCH] ARM: dts: at91: Configure I2C SCL gpio as open drain
Date: Fri, 15 May 2020 15:24:08 +0000 [thread overview]
Message-ID: <e99e9473-6dd2-1a27-975e-e49ad5413b02@microchip.com> (raw)
In-Reply-To: <20200515145849.GV34497@piout.net>
On 15.05.2020 17:58, Alexandre Belloni wrote:
> On 15/05/2020 17:00:01+0300, Codrin Ciubotariu wrote:
>> The SCL gpio pin used by I2C bus for recovery needs to be configured as
>> open drain.
>>
>> Fixes: 455fec938bbb ("ARM: dts: at91: sama5d2: add i2c gpio pinctrl")
>> Fixes: a4bd8da893a3 ("ARM: dts: at91: sama5d3: add i2c gpio pinctrl")
>> Fixes: 8fb82f050cf6 ("ARM: dts: at91: sama5d4: add i2c gpio pinctrl")
>> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
>> ---
>> arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 6 +++---
>> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 6 +++---
>> arch/arm/boot/dts/sama5d3.dtsi | 6 +++---
>> arch/arm/boot/dts/sama5d4.dtsi | 6 +++---
>> 4 files changed, 12 insertions(+), 12 deletions(-)
>>
>
> Applied, thanks. There was a small conflict in the sama5d2 board dts,
> please check.
It is ok, with the exception that it should also be added for the
scl-gpios property from the i2c2 node. I am making a patch.
>
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
prev parent reply other threads:[~2020-05-15 15:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-15 14:00 [PATCH] ARM: dts: at91: Configure I2C SCL gpio as open drain Codrin Ciubotariu
2020-05-15 14:58 ` Alexandre Belloni
2020-05-15 15:24 ` Codrin.Ciubotariu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e99e9473-6dd2-1a27-975e-e49ad5413b02@microchip.com \
--to=codrin.ciubotariu@microchip.com \
--cc=Ludovic.Desroches@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).