From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Biju Das <biju.das.jz@bp.renesas.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
William Breathitt Gray <william.gray@linaro.org>,
Thierry Reding <thierry.reding@gmail.com>
Cc: "Lee Jones" <lee@kernel.org>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
devicetree@vger.kernel.org, linux-pwm@vger.kernel.org,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Chris Paterson" <Chris.Paterson2@renesas.com>,
"Biju Das" <biju.das@bp.renesas.com>,
"Prabhakar Mahadev Lad" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH 1/3] dt-bindings: mfd: Document RZ/G2L MTU3a bindings
Date: Wed, 5 Oct 2022 18:32:15 +0200 [thread overview]
Message-ID: <ea77fa9d-d579-b517-7b47-e6765d1a3492@linaro.org> (raw)
In-Reply-To: <20221005135518.876913-2-biju.das.jz@bp.renesas.com>
On 05/10/2022 15:55, Biju Das wrote:
> The RZ/G2L multi-function timer pulse unit 3 (MTU3a) is embedded in
> the Renesas RZ/G2L family SoC's. It consists of eight 16-bit timer
> channels and one 32-bit timer channel. It supports the following
> functions
> - Counter
> - Timer
> - PWM
>
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> RFC->v1:
> * Modelled counter and pwm as a single device that handles
> multiple channels.
> * Moved counter and pwm bindings to respective subsystems
> * Dropped 'bindings' from MFD binding title.
> * Updated the example
> * Changed the compatible names.
RFC is a v1. This is a v2.
> ---
> .../counter/renesas,rz-mtu3-counter.yaml | 30 ++
> .../bindings/mfd/renesas,rz-mtu3.yaml | 290 ++++++++++++++++++
> .../bindings/pwm/renesas,rz-mtu3-pwm.yaml | 50 +++
> 3 files changed, 370 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/counter/renesas,rz-mtu3-counter.yaml
> create mode 100644 Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml
> create mode 100644 Documentation/devicetree/bindings/pwm/renesas,rz-mtu3-pwm.yaml
>
> diff --git a/Documentation/devicetree/bindings/counter/renesas,rz-mtu3-counter.yaml b/Documentation/devicetree/bindings/counter/renesas,rz-mtu3-counter.yaml
> new file mode 100644
> index 000000000000..c8b86ef254b6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/counter/renesas,rz-mtu3-counter.yaml
> @@ -0,0 +1,30 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/counter/renesas,rz-mtu3-counter.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L MTU3a Counter Module
> +
> +maintainers:
> + - Biju Das <biju.das.jz@bp.renesas.com>
> +
> +description: |
> + This module is part of the rz-mtu3 multi-function device. For more
> + details see ../mfd/renesas,rz-mtu3.yaml.
> +
> + There are two phase counting modes: 16-bit phase counting mode in which MTU1
> + and MTU2 operate independently, and cascade connection 32-bit phase counting
> + mode in which MTU1 and MTU2 are cascaded.
> +
> + In phase counting mode, the phase difference between two external input clocks
> + is detected and the corresponding TCNT is incremented or decremented.
> +
> +properties:
> + compatible:
> + const: renesas,rz-mtu3-counter
> +
> +required:
> + - compatible
One property - compatible - does not deserve its own schema. Integrate
with the other one.
> +
> +additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml b/Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml
> new file mode 100644
> index 000000000000..0413d22704c9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/renesas,rz-mtu3.yaml
> @@ -0,0 +1,290 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/renesas,rz-mtu3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L Multi-Function Timer Pulse Unit 3 (MTU3a)
> +
> +maintainers:
> + - Biju Das <biju.das.jz@bp.renesas.com>
> +
> +description: |
> + This hardware block pconsisting of eight 16-bit timer channels and one
> + 32- bit timer channel. It supports the following specifications:
> + - Pulse input/output: 28 lines max.
> + - Pulse input 3 lines
> + - Count clock 11 clocks for each channel (14 clocks for MTU0, 12 clocks
> + for MTU2, and 10 clocks for MTU5, four clocks for MTU1-MTU2 combination
> + (when LWA = 1))
> + - Operating frequency Up to 100 MHz
> + - Available operations [MTU0 to MTU4, MTU6, MTU7, and MTU8]
> + - Waveform output on compare match
> + - Input capture function (noise filter setting available)
> + - Counter-clearing operation
> + - Simultaneous writing to multiple timer counters (TCNT)
> + (excluding MTU8).
> + - Simultaneous clearing on compare match or input capture
> + (excluding MTU8).
> + - Simultaneous input and output to registers in synchronization with
> + counter operations (excluding MTU8).
> + - Up to 12-phase PWM output in combination with synchronous operation
> + (excluding MTU8)
> + - [MTU0 MTU3, MTU4, MTU6, MTU7, and MTU8]
> + - Buffer operation specifiable
> + - [MTU1, MTU2]
> + - Phase counting mode can be specified independently
> + - 32-bit phase counting mode can be specified for interlocked operation
> + of MTU1 and MTU2 (when TMDR3.LWA = 1)
> + - Cascade connection operation available
> + - [MTU3, MTU4, MTU6, and MTU7]
> + - Through interlocked operation of MTU3/4 and MTU6/7, the positive and
> + negative signals in six phases (12 phases in total) can be output in
> + complementary PWM and reset-synchronized PWM operation.
> + - In complementary PWM mode, values can be transferred from buffer
> + registers to temporary registers at crests and troughs of the timer-
> + counter values or when the buffer registers (TGRD registers in MTU4
> + and MTU7) are written to.
> + - Double-buffering selectable in complementary PWM mode.
> + - [MTU3 and MTU4]
> + - Through interlocking with MTU0, a mode for driving AC synchronous
> + motors (brushless DC motors) by using complementary PWM output and
> + reset-synchronized PWM output is settable and allows the selection
> + of two types of waveform output (chopping or level).
> + - [MTU5]
> + - Capable of operation as a dead-time compensation counter.
> + - [MTU0/MTU5, MTU1, MTU2, and MTU8]
> + - 32-bit phase counting mode specifiable by combining MTU1 and MTU2 and
> + through interlocked operation with MTU0/MTU5 and MTU8.
> + - Interrupt-skipping function
> + - In complementary PWM mode, interrupts on crests and troughs of counter
> + values and triggers to start conversion by the A/D converter can be
> + skipped.
> + - Interrupt sources: 43 sources.
> + - Buffer operation:
> + - Automatic transfer of register data (transfer from the buffer
> + register to the timer register).
> + - Trigger generation
> + - A/D converter start triggers can be generated
> + - A/D converter start request delaying function enables A/D converter
> + to be started with any desired timing and to be synchronized with
> + PWM output.
> + - Low power consumption function
> + - The MTU3a can be placed in the module-stop state.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - renesas,r9a07g044-mtu3 # RZ/G2{L,LC}
> + - renesas,r9a07g054-mtu3 # RZ/V2L
> + - const: renesas,rz-mtu3
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + items:
> + - description: MTU0.TGRA input capture/compare match
> + - description: MTU0.TGRB input capture/compare match
> + - description: MTU0.TGRC input capture/compare match
> + - description: MTU0.TGRD input capture/compare match
> + - description: MTU0.TCNT overflow
> + - description: MTU0.TGRE compare match
> + - description: MTU0.TGRF compare match
> + - description: MTU1.TGRA input capture/compare match
> + - description: MTU1.TGRB input capture/compare match
> + - description: MTU1.TCNT overflow
> + - description: MTU1.TCNT underflow
> + - description: MTU2.TGRA input capture/compare match
> + - description: MTU2.TGRB input capture/compare match
> + - description: MTU2.TCNT overflow
> + - description: MTU2.TCNT underflow
> + - description: MTU3.TGRA input capture/compare match
> + - description: MTU3.TGRB input capture/compare match
> + - description: MTU3.TGRC input capture/compare match
> + - description: MTU3.TGRD input capture/compare match
> + - description: MTU3.TCNT overflow
> + - description: MTU4.TGRA input capture/compare match
> + - description: MTU4.TGRB input capture/compare match
> + - description: MTU4.TGRC input capture/compare match
> + - description: MTU4.TGRD input capture/compare match
> + - description: MTU4.TCNT overflow/underflow
> + - description: MTU5.TGRU input capture/compare match
> + - description: MTU5.TGRV input capture/compare match
> + - description: MTU5.TGRW input capture/compare match
> + - description: MTU6.TGRA input capture/compare match
> + - description: MTU6.TGRB input capture/compare match
> + - description: MTU6.TGRC input capture/compare match
> + - description: MTU6.TGRD input capture/compare match
> + - description: MTU6.TCNT overflow
> + - description: MTU7.TGRA input capture/compare match
> + - description: MTU7.TGRB input capture/compare match
> + - description: MTU7.TGRC input capture/compare match
> + - description: MTU7.TGRD input capture/compare match
> + - description: MTU7.TCNT overflow/underflow
> + - description: MTU8.TGRA input capture/compare match
> + - description: MTU8.TGRB input capture/compare match
> + - description: MTU8.TGRC input capture/compare match
> + - description: MTU8.TGRD input capture/compare match
> + - description: MTU8.TCNT overflow
> + - description: MTU8.TCNT underflow
> +
> + interrupt-names:
> + items:
> + - const: tgia0
> + - const: tgib0
> + - const: tgic0
> + - const: tgid0
> + - const: tgiv0
> + - const: tgie0
> + - const: tgif0
> + - const: tgia1
> + - const: tgib1
> + - const: tgiv1
> + - const: tgiu1
> + - const: tgia2
> + - const: tgib2
> + - const: tgiv2
> + - const: tgiu2
> + - const: tgia3
> + - const: tgib3
> + - const: tgic3
> + - const: tgid3
> + - const: tgiv3
> + - const: tgia4
> + - const: tgib4
> + - const: tgic4
> + - const: tgid4
> + - const: tgiv4
> + - const: tgiu5
> + - const: tgiv5
> + - const: tgiw5
> + - const: tgia6
> + - const: tgib6
> + - const: tgic6
> + - const: tgid6
> + - const: tgiv6
> + - const: tgia7
> + - const: tgib7
> + - const: tgic7
> + - const: tgid7
> + - const: tgiv7
> + - const: tgia8
> + - const: tgib8
> + - const: tgic8
> + - const: tgid8
> + - const: tgiv8
> + - const: tgiu8
> +
> + clocks:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
You still do not have children with unit addresses, so these are weird.
So again - why do you need this?
> +
> + "counter":
No need for quotes.
> + $ref: ../counter/renesas,rz-mtu3-counter.yaml
> +
> + "pwm":
No need for quotes.
> + $ref: ../pwm/renesas,rz-mtu3-pwm.yaml
Full path, so /schemas/pwm/...
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-names
> + - clocks
> + - power-domains
> + - resets
Best regards,
Krzysztof
next prev parent reply other threads:[~2022-10-05 16:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-05 13:55 [PATCH 0/3] Add RZ/G2L MTU3a MFD and pwm driver Biju Das
2022-10-05 13:55 ` [PATCH 1/3] dt-bindings: mfd: Document RZ/G2L MTU3a bindings Biju Das
2022-10-05 16:32 ` Krzysztof Kozlowski [this message]
2022-10-06 8:03 ` Biju Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ea77fa9d-d579-b517-7b47-e6765d1a3492@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=Chris.Paterson2@renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=biju.das@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lee@kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=william.gray@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).