Re: [PATCH v1 1/3] dt-bindings: iio: light: ROHM BU27008

[Matti Vaittinen <mazziesaccount@gmail.com>]

On 4/24/23 13:12, Krzysztof Kozlowski wrote:
> On 21/04/2023 11:38, Matti Vaittinen wrote:
>> The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear
>> and IR) with four configurable channels. Red and green being always
>> available and two out of the rest three (blue, clear, IR) can be
>> selected to be simultaneously measured. Typical application is adjusting
>> LCD backlight of TVs, mobile phones and tablet PCs.
>>
>> Add BU27008 dt-bindings.
>>
>> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
>> ---
>>   .../bindings/iio/light/rohm-bu27008.yaml      | 49 +++++++++++++++++++
>>   1 file changed, 49 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml
> 
> Filename like compatible, so rohm,bu27008.yaml

Thanks Krzysztof. I should've remembered this as you told me the same 
thing during the bu27034 review. Feel free to kick me atthe ELC-E if I 
do the same mistake with bu27010 as well ^^;
> 
>>
>> diff --git a/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml b/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml
>> new file mode 100644
>> index 000000000000..d942c2817680
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/light/rohm-bu27008.yaml
>> @@ -0,0 +1,49 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/iio/light/bu27008.yaml#
> 
> Does not look like you tested the bindings. Please run `make
> dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
> 

I actually did. But I did first run the dt_binding_check without 
filename - causing it to check all the in-tree bindings - which took a 
while. So, I went to have a lunch. When I came back I re-ran the check 
with the filename (DT_SCHEMA_FILES=...) - which gave me no errors.

I _assume_ this is because running the check for all bindings had 
already done <add step here> generating the warning, while re-running 
the check with the filename omitted the <add step here> and no longer 
displayed the warning.

In any case, I missed warning from full-check, and checker missed the 
warning when re-ran.

> 
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: ROHM BU27008 color sensor
>> +
>> +maintainers:
>> +  - Matti Vaittinen <mazziesaccount@gmail.com>
>> +
>> +description: |
> 
> Do not need '|' unless you need to preserve formatting.

Ok, thanks.

I'll fix these for v2 :)

Yours,
	-- Matti

-- 
Matti Vaittinen
Linux kernel developer at ROHM Semiconductors
Oulu Finland

~~ When things go utterly wrong vim users can always type :help! ~~