From mboxrd@z Thu Jan  1 00:00:00 1970
From: Gabriel Fernandez <gabriel.fernandez@st.com>
Subject: Re: [PATCH 1/6] clk: stm32f4: Add PLL_I2S & PLL_SAI for STM32F429/469
 boards
Date: Tue, 8 Nov 2016 09:35:58 +0100
Message-ID: <ebadfacf-73fb-01a6-791a-324daad5e695@st.com>
References: <1478523943-23142-1-git-send-email-gabriel.fernandez@st.com>
 <1478523943-23142-2-git-send-email-gabriel.fernandez@st.com>
 <CAFvLkMQxvo=2Ak033n2XkPgdDfU5DLCMF7dj487QFB0e7WceCQ@mail.gmail.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="utf-8"; format=flowed
Content-Transfer-Encoding: 8bit
Return-path: <linux-clk-owner@vger.kernel.org>
In-Reply-To: <CAFvLkMQxvo=2Ak033n2XkPgdDfU5DLCMF7dj487QFB0e7WceCQ@mail.gmail.com>
Sender: linux-clk-owner@vger.kernel.org
To: =?UTF-8?Q?Rados=c5=82aw_Pietrzyk?= <radoslaw.pietrzyk@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Russell King <linux@armlinux.org.uk>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@codeaurora.org>, Nicolas Pitre <nico@linaro.org>, Arnd Bergmann <arnd@arndb.de>, Daniel Thompson <daniel.thompson@linaro.org>, Andrea Merello <andrea.merello@gmail.com>, devicetree@vger.kernel.org, amelie.delaunay@st.com, kernel@stlinux.com, olivier.bideau@st.com, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, ludovic.barre@st.com, linux-arm-kernel@lists.infradead.org
List-Id: devicetree@vger.kernel.org

Hi Radosław

Many thanks for reviewing.

On 11/07/2016 03:57 PM, Radosław Pietrzyk wrote:
>> +static struct clk_hw *clk_register_pll_div(const char *name,
>> +               const char *parent_name, unsigned long flags,
>> +               void __iomem *reg, u8 shift, u8 width,
>> +               u8 clk_divider_flags, const struct clk_div_table *table,
>> +               struct clk_hw *pll_hw, spinlock_t *lock)
>> +{
>> +       struct stm32f4_pll_div *pll_div;
>> +       struct clk_hw *hw;
>> +       struct clk_init_data init;
>> +       int ret;
>> +
>> +       /* allocate the divider */
>> +       pll_div = kzalloc(sizeof(*pll_div), GFP_KERNEL);
>> +       if (!pll_div)
>> +               return ERR_PTR(-ENOMEM);
>> +
>> +       init.name = name;
>> +       init.ops = &stm32f4_pll_div_ops;
>> +       init.flags = flags;
> Maybe it's worth to have CLK_SET_RATE_PARENT here and the VCO clock
> should have CLK_SET_RATE_GATE flag and we can get rid of custom
> divider ops.
I don't want to offer the possibility to change the vco clock through 
the divisor of the pll (only by a boot-loader or by DT).

e.g. if i make a set rate on lcd-tft clock, i don't want to change the 
SAI frequencies.

I used same structure for internal divisors of the pll (p, q, r) and for 
post divisors (plli2s-q-div, pllsai-q-div & pllsai-r-div).
That why the CLK_SET_RATE_PARENT flag is transmit by parameter.

These divisors are similar because we have to switch off the pll before 
changing the rate.

>
>
>> -static void stm32f4_rcc_register_pll(const char *hse_clk, const char *hsi_clk)
>> +
>> +static struct clk_hw *stm32f4_rcc_register_pll(const char *pllsrc,
>> +               const struct stm32f4_pll_data *data,  spinlock_t *lock)
>>   {
>> -       unsigned long pllcfgr = readl(base + STM32F4_RCC_PLLCFGR);
>> +       struct stm32f4_pll *pll;
>> +       struct clk_init_data init = { NULL };
>> +       void __iomem *reg;
>> +       struct clk_hw *pll_hw;
>> +       int ret;
>> +
>> +       pll = kzalloc(sizeof(*pll), GFP_KERNEL);
>> +       if (!pll)
>> +               return ERR_PTR(-ENOMEM);
>> +
>> +       init.name = data->vco_name;
>> +       init.ops = &stm32f4_pll_gate_ops;
>> +       init.flags = CLK_IGNORE_UNUSED;
> CLK_SET_RATE_GATE here
>
> Moreover why not having VCO as a composite clock from gate and mult ?
Yes, that sounds a good idea.

> According to docs SAI VCO (don't know about I2S ) must be within
> certain range so clk_set_rate_range should be somewhere.