From mboxrd@z Thu Jan  1 00:00:00 1970
From: Archit Taneja <architt-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: Re: [PATCH v3 6/6] drm/stm: Add STM32 DSI host driver
Date: Fri, 9 Jun 2017 11:01:48 +0530
Message-ID: <ee037c0e-27db-e664-ebf8-586a818eb675@codeaurora.org>
References: <1496414235-20098-1-git-send-email-philippe.cornu@st.com>
 <1496414235-20098-7-git-send-email-philippe.cornu@st.com>
 <e1872ac0-c0e0-b615-4b5e-d45d9ae96f85@baylibre.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
In-Reply-To: <e1872ac0-c0e0-b615-4b5e-d45d9ae96f85-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Content-Language: en-US
Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
To: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>, Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org>, Alexandre Torgue <alexandre.torgue-qxv4g6HH51o@public.gmane.org>, Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, David Airlie <airlied-cv59FeDIM0c@public.gmane.org>, Maxime Coquelin <mcoquelin.stm32-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>, Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>, Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>, Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>, Benjamin Gaignard <benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, Yannick Fertre <yannick.fertre-qxv4g6HH51o@public.gmane.org>, Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>, Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>, Andrzej Hajda <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>, Xinliang Liu <xinliang.liu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>, zourongrong-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, Xinwei Kong <kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>, Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>, Mark Yao <mark.yao@rock-chip>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Fabien Dessenne <fabien.dessenne-qxv4g6HH51o@public.gmane.org>, dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, Mickael Reulier <mickael.reulier-qxv4g6HH51o@public.gmane.org>, Vincent Abriou <vincent.abriou-qxv4g6HH51o@public.gmane.org>, Gabriel Fernandez <gabriel.fernandez-qxv4g6HH51o@public.gmane.org>, Ludovic Barre <ludovic.barre-qxv4g6HH51o@public.gmane.org>
List-Id: devicetree@vger.kernel.org



On 06/06/2017 01:41 PM, Neil Armstrong wrote:
> Hi Philippe,
> 
> On 06/02/2017 04:37 PM, Philippe CORNU wrote:
>> Add the STM32 DSI host driver that uses the Synopsys DesignWare
>> MIPI DSI DRM bridge.
>>
>> Signed-off-by: Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org>
>> ---
>>   drivers/gpu/drm/stm/Kconfig           |   8 +
>>   drivers/gpu/drm/stm/Makefile          |   2 +
>>   drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 353 ++++++++++++++++++++++++++++++++++
>>   3 files changed, 363 insertions(+)
>>   create mode 100644 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>>
>> diff --git a/drivers/gpu/drm/stm/Kconfig b/drivers/gpu/drm/stm/Kconfig
>> index 4b88223..4c0d670 100644
>> --- a/drivers/gpu/drm/stm/Kconfig
>> +++ b/drivers/gpu/drm/stm/Kconfig
>> @@ -14,3 +14,11 @@ config DRM_STM
>>   	  STMicroelectronics STM32 MCUs.
>>   	  To compile this driver as a module, choose M here: the module
>>   	  will be called stm-drm.
>> +
>> +config DRM_STM_DSI
>> +	tristate "STMicroelectronics specific extensions for Synopsys MIPI DSI"
>> +	depends on DRM_STM
>> +	select DRM_MIPI_DSI
>> +	select DRM_DW_MIPI_DSI
>> +	help
>> +	  Choose this option for MIPI DSI support on STMicroelectronics SoC.
>> diff --git a/drivers/gpu/drm/stm/Makefile b/drivers/gpu/drm/stm/Makefile
>> index a09ecf4..d883adc 100644
>> --- a/drivers/gpu/drm/stm/Makefile
>> +++ b/drivers/gpu/drm/stm/Makefile
>> @@ -2,4 +2,6 @@ stm-drm-y := \
>>   	drv.o \
>>   	ltdc.o
>>   
>> +obj-$(CONFIG_DRM_STM_DSI) += dw_mipi_dsi-stm.o
>> +
>>   obj-$(CONFIG_DRM_STM) += stm-drm.o
>> diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> new file mode 100644
>> index 0000000..8dedc5c
>> --- /dev/null
>> +++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> @@ -0,0 +1,353 @@
>> +/*
>> + * Copyright (C) STMicroelectronics SA 2017
>> + *
>> + * Authors: Philippe Cornu <philippe.cornu-qxv4g6HH51o@public.gmane.org>
>> + *          Yannick Fertre <yannick.fertre-qxv4g6HH51o@public.gmane.org>
>> + *
>> + * License terms:  GNU General Public License (GPL), version 2
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/math64.h>

We don't seem to use any math64 funcs.

>> +#include <linux/module.h>
>> +#include <drm/drmP.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/bridge/dw_mipi_dsi.h>
>> +#include <video/mipi_display.h>
>> +
>> +/* DSI wrapper register & bit definitions */
>> +/* Note: registers are named as in the Reference Manual */
>> +#define DSI_WCFGR	0x0400		/* Wrapper ConFiGuration Reg */
>> +#define WCFGR_DSIM	BIT(0)		/* DSI Mode */
>> +#define WCFGR_COLMUX	GENMASK(3, 1)	/* COLor MUltipleXing */
>> +
>> +#define DSI_WCR		0x0404		/* Wrapper Control Reg */
>> +#define WCR_DSIEN	BIT(3)		/* DSI ENable */
>> +
>> +#define DSI_WISR	0x040C		/* Wrapper Interrupt and Status Reg */
>> +#define WISR_PLLLS	BIT(8)		/* PLL Lock Status */
>> +#define WISR_RRS	BIT(12)		/* Regulator Ready Status */
>> +
>> +#define DSI_WPCR0	0x0418		/* Wrapper Phy Conf Reg 0 */
>> +#define WPCR0_UIX4	GENMASK(5, 0)	/* Unit Interval X 4 */
>> +#define WPCR0_TDDL	BIT(16)		/* Turn Disable Data Lanes */
>> +
>> +#define DSI_WRPCR	0x0430		/* Wrapper Regulator & Pll Ctrl Reg */
>> +#define WRPCR_PLLEN	BIT(0)		/* PLL ENable */
>> +#define WRPCR_NDIV	GENMASK(8, 2)	/* pll loop DIVision Factor */
>> +#define WRPCR_IDF	GENMASK(14, 11)	/* pll Input Division Factor */
>> +#define WRPCR_ODF	GENMASK(17, 16)	/* pll Output Division Factor */
>> +#define WRPCR_REGEN	BIT(24)		/* REGulator ENable */
>> +#define WRPCR_BGREN	BIT(28)		/* BandGap Reference ENable */
>> +#define IDF_MIN		1
>> +#define IDF_MAX		7
>> +#define NDIV_MIN	10
>> +#define NDIV_MAX	125
>> +#define ODF_MIN		1
>> +#define ODF_MAX		8
>> +
>> +/* dsi color format coding according to the datasheet */
>> +enum dsi_color {
>> +	DSI_RGB565_CONF1,
>> +	DSI_RGB565_CONF2,
>> +	DSI_RGB565_CONF3,
>> +	DSI_RGB666_CONF1,
>> +	DSI_RGB666_CONF2,
>> +	DSI_RGB888,
>> +};
>> +
>> +#define LANE_MIN_KBPS	31250
>> +#define LANE_MAX_KBPS	500000
>> +
>> +/* Sleep & timeout for regulator on/off, pll lock/unlock & fifo empty */
>> +#define SLEEP_US	1000
>> +#define TIMEOUT_US	200000
>> +
>> +struct dw_mipi_dsi_stm {
>> +	void __iomem *base;
>> +	struct clk *pllref_clk;
>> +};
>> +
>> +static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
>> +{
>> +	writel_relaxed(val, dsi->base + reg);
>> +}
>> +
>> +static inline u32 dsi_read(struct dw_mipi_dsi_stm *dsi, u32 reg)
>> +{
>> +	return readl_relaxed(dsi->base + reg);
>> +}
>> +
>> +static inline void dsi_set(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
>> +{
>> +	dsi_write(dsi, reg, dsi_read(dsi, reg) | mask);
>> +}
>> +
>> +static inline void dsi_clear(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
>> +{
>> +	dsi_write(dsi, reg, dsi_read(dsi, reg) & ~mask);
>> +}
>> +
>> +static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
>> +				   u32 mask, u32 val)
>> +{
>> +	dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
>> +}
>> +
>> +static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
>> +{
>> +	switch (fmt) {
>> +	case MIPI_DSI_FMT_RGB888:
>> +		return DSI_RGB888;
>> +	case MIPI_DSI_FMT_RGB666:
>> +		return DSI_RGB666_CONF2;
>> +	case MIPI_DSI_FMT_RGB666_PACKED:
>> +		return DSI_RGB666_CONF1;
>> +	case MIPI_DSI_FMT_RGB565:
>> +		return DSI_RGB565_CONF1;
>> +	default:
>> +		DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
>> +	}
>> +	return DSI_RGB888;
>> +}
>> +
>> +static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
>> +{
>> +	/* prevent from division by 0 */
>> +	if (idf * odf)
>> +		return DIV_ROUND_CLOSEST(clkin_khz * ndiv, idf * odf);
>> +
>> +	return 0;
>> +}
>> +
>> +static int dsi_pll_get_params(int clkin_khz, int clkout_khz,
>> +			      int *idf, int *ndiv, int *odf)
>> +{
>> +	int i, o, n, n_min, n_max;
>> +	int fvco_min, fvco_max, delta, best_delta; /* all in khz */
>> +
>> +	/* Early checks preventing division by 0 & odd results */
>> +	if ((clkin_khz <= 0) || (clkout_khz <= 0))
>> +		return -EINVAL;
>> +
>> +	fvco_min = LANE_MIN_KBPS * 2 * ODF_MAX;
>> +	fvco_max = LANE_MAX_KBPS * 2 * ODF_MIN;
>> +
>> +	best_delta = 1000000; /* big started value (1000000khz) */
>> +
>> +	for (i = IDF_MIN; i <= IDF_MAX; i++) {
>> +		/* Compute ndiv range according to Fvco */
>> +		n_min = ((fvco_min * i) / (2 * clkin_khz)) + 1;
>> +		n_max = (fvco_max * i) / (2 * clkin_khz);
>> +
>> +		/* No need to continue idf loop if we reach ndiv max */
>> +		if (n_min >= NDIV_MAX)
>> +			break;
>> +
>> +		/* Clamp ndiv to valid values */
>> +		if (n_min < NDIV_MIN)
>> +			n_min = NDIV_MIN;
>> +		if (n_max > NDIV_MAX)
>> +			n_max = NDIV_MAX;
>> +
>> +		for (o = ODF_MIN; o <= ODF_MAX; o *= 2) {
>> +			n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz);
>> +			/* Check ndiv according to vco range */
>> +			if ((n < n_min) || (n > n_max))
>> +				continue;
>> +			/* Check if new delta is better & saves parameters */
>> +			delta = dsi_pll_get_clkout_khz(clkin_khz, i, n, o) -
>> +				clkout_khz;
>> +			if (delta < 0)
>> +				delta = -delta;
>> +			if (delta < best_delta) {
>> +				*idf = i;
>> +				*ndiv = n;
>> +				*odf = o;
>> +				best_delta = delta;
>> +			}
>> +			/* fast return in case of "perfect result" */
>> +			if (!delta)
>> +				return 0;
>> +		}
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int dw_mipi_dsi_phy_init(void *priv_data)
>> +{
>> +	struct dw_mipi_dsi_stm *dsi = priv_data;
>> +	u32 val;
>> +	int ret;
>> +
>> +	/* Enable the regulator */
>> +	dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN);
>> +	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
>> +				 SLEEP_US, TIMEOUT_US);
>> +	if (ret)
>> +		DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
>> +
>> +	/* Enable the DSI PLL & wait for its lock */
>> +	dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
>> +	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
>> +				 SLEEP_US, TIMEOUT_US);
>> +	if (ret)
>> +		DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
>> +
>> +	/* Enable the DSI wrapper */
>> +	dsi_set(dsi, DSI_WCR, WCR_DSIEN);
>> +
>> +	return 0;
>> +}
>> +
>> +static int
>> +dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
>> +			  unsigned long mode_flags, u32 lanes, u32 format,
>> +			  unsigned int *lane_mbps)
>> +{
>> +	struct dw_mipi_dsi_stm *dsi = priv_data;
>> +	unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
>> +	int ret, bpp;
>> +	u32 val;

I see some warnings about ndiv, odf and idf possibly being unused, could
you fix those?

>> +
>> +	pll_in_khz = (unsigned int)(clk_get_rate(dsi->pllref_clk) / 1000);
>> +
>> +	/* Compute requested pll out */
>> +	bpp = mipi_dsi_pixel_format_to_bpp(format);
>> +	pll_out_khz = mode->clock * bpp / lanes;
>> +	/* Add 20% to pll out to be higher than pixel bw (burst mode only) */
>> +	pll_out_khz = (pll_out_khz * 12) / 10;
>> +	if (pll_out_khz > LANE_MAX_KBPS) {
>> +		pll_out_khz = LANE_MAX_KBPS;
>> +		DRM_DEBUG_DRIVER("Warning max phy mbps is used\n");

We have a DRM_WARN macro if this is really a warning.

Patch looks good to me otherwise.

Thanks,
Archit

>> +	}
>> +	if (pll_out_khz < LANE_MIN_KBPS) {
>> +		pll_out_khz = LANE_MIN_KBPS;
>> +		DRM_DEBUG_DRIVER("Warning min phy mbps is used\n");
>> +	}
>> +
>> +	/* Compute best pll parameters */
>> +	ret = dsi_pll_get_params(pll_in_khz, pll_out_khz, &idf, &ndiv, &odf);
>> +	if (ret)
>> +		DRM_DEBUG_DRIVER("Warning dsi_pll_get_params(): bad params\n");
>> +
>> +	/* Get the adjusted pll out value */
>> +	pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
>> +
>> +	/* Set the PLL division factors */
>> +	dsi_update_bits(dsi, DSI_WRPCR,	WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF,
>> +			(ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16));
>> +
>> +	/* Compute uix4 & set the bit period in high-speed mode */
>> +	val = 4000000 / pll_out_khz;
>> +	dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val);
>> +
>> +	/* Select video mode by resetting DSIM bit */
>> +	dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
>> +
>> +	/* Select the color coding */
>> +	dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
>> +			dsi_color_from_mipi(format) << 1);
>> +
>> +	*lane_mbps = pll_out_khz / 1000;
>> +
>> +	DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
>> +			 pll_in_khz, pll_out_khz, *lane_mbps);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct dw_mipi_dsi_phy_ops dw_mipi_dsi_stm_phy_ops = {
>> +	.init = dw_mipi_dsi_phy_init,
>> +	.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
>> +};
>> +
>> +static struct dw_mipi_dsi_plat_data dw_mipi_dsi_stm_plat_data = {
>> +	.max_data_lanes = 2,
>> +	.phy_ops = &dw_mipi_dsi_stm_phy_ops,
>> +};
>> +
>> +static const struct of_device_id dw_mipi_dsi_stm_dt_ids[] = {
>> +	{
>> +	 .compatible = "st,stm32-dsi",
>> +	 .data = &dw_mipi_dsi_stm_plat_data,
> 
> Alignement is weird here !
> 
> 
>> +	},
>> +	{ /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, dw_mipi_dsi_stm_dt_ids);
>> +
>> +static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct dw_mipi_dsi_stm *dsi;
>> +	struct resource *res;
>> +	int ret;
>> +
>> +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
>> +	if (!dsi)
>> +		return -ENOMEM;
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	if (!res) {
>> +		DRM_ERROR("Unable to get resource\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	dsi->base = devm_ioremap_resource(dev, res);
>> +	if (IS_ERR(dsi->base)) {
>> +		DRM_ERROR("Unable to get dsi registers\n");
>> +		return PTR_ERR(dsi->base);
>> +	}
>> +
>> +	dsi->pllref_clk = devm_clk_get(dev, "ref");
>> +	if (IS_ERR(dsi->pllref_clk)) {
>> +		ret = PTR_ERR(dsi->pllref_clk);
>> +		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = clk_prepare_enable(dsi->pllref_clk);
>> +	if (ret) {
>> +		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
>> +		return ret;
>> +	}
>> +
>> +	dw_mipi_dsi_stm_plat_data.base = dsi->base;
>> +	dw_mipi_dsi_stm_plat_data.priv_data = dsi;
>> +
>> +	ret = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
>> +	if (ret) {
>> +		DRM_ERROR("Failed to initialize mipi dsi host\n");
>> +		clk_disable_unprepare(dsi->pllref_clk);
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
>> +{
>> +	struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
>> +
>> +	clk_disable_unprepare(dsi->pllref_clk);
>> +	dw_mipi_dsi_remove(pdev);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct platform_driver dw_mipi_dsi_stm_driver = {
>> +	.probe		= dw_mipi_dsi_stm_probe,
>> +	.remove		= dw_mipi_dsi_stm_remove,
>> +	.driver		= {
>> +		.of_match_table = dw_mipi_dsi_stm_dt_ids,
>> +		.name	= "dw_mipi_dsi-stm",
>> +	},
>> +};
>> +
>> +module_platform_driver(dw_mipi_dsi_stm_driver);
>> +
>> +MODULE_AUTHOR("Philippe Cornu <philippe.cornu-qxv4g6HH51o@public.gmane.org>");
>> +MODULE_AUTHOR("Yannick Fertre <yannick.fertre-qxv4g6HH51o@public.gmane.org>");
>> +MODULE_DESCRIPTION("STMicroelectronics DW MIPI DSI host controller driver");
>> +MODULE_LICENSE("GPL v2");
>>
> 
> A part from this small nit,
> Reviewed-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html