Re: [PATCH 2/4] ARM: dts: omap4-droid4: Update backlight dt properties

[Jacek Anaszewski <jacek.anaszewski@gmail.com>]

On 4/5/19 12:00 AM, Tony Lindgren wrote:
> * Jacek Anaszewski <jacek.anaszewski@gmail.com> [190404 20:12]:
>> Tony,
>>
>> On 3/21/19 3:28 PM, Dan Murphy wrote:
>>> Update the properties for the lm3532 device node for droid4.
>>> With this change the backlight LED string and the keypad
>>> LED strings will be controlled separately.
>>>
>>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>>> ---
>>>
>>> v5 - No change - https://lore.kernel.org/patchwork/patch/1050409/
>>>
>>> v4 - No change - https://lore.kernel.org/patchwork/patch/1050125/
>>> v3 - updated keypad label on v1 comment - https://lore.kernel.org/patchwork/patch/1049023/
>>> v2 - Fixed ramp-up and ramp-down properties, removed hard coded property values,
>>> I did not change the label as it is undecided what it could be - https://lore.kernel.org/patchwork/patch/1048806/
>>>
>>>    arch/arm/boot/dts/omap4-droid4-xt894.dts | 26 ++++++++++++++++--------
>>>    1 file changed, 18 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
>>> index e21ec929f096..aea206f04f76 100644
>>> --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
>>> +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
>>> @@ -383,20 +383,30 @@
>>>    };
>>>    &i2c1 {
>>> -	lm3532@38 {
>>> +	led-controller@38 {
>>>    		compatible = "ti,lm3532";
>>> +		#address-cells = <1>;
>>> +		#size-cells = <0>;
>>>    		reg = <0x38>;
>>>    		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
>>> -		lcd_backlight: backlight {
>>> -			compatible = "ti,lm3532-backlight";
>>> +		ramp-up-us = <1024>;
>>> +		ramp-down-us = <8193>;
>>> -			lcd {
>>> -				led-sources = <0 1 2>;
>>> -				ramp-up-msec = <1>;
>>> -				ramp-down-msec = <0>;
>>> -			};
>>
>> Since I'll be creating integration branch for this series,
>> and it would be good to have this patch in it too, then
>> I can do the amendments by myself:
>>
>>> +		lcd_backlight: led@0 {
>>> +			reg = <0>;
>>> +			led-sources = <2>;
>>> +			ti,led-mode = <0>;
>>> +			label = "backlight";
>>
>> s/backlight/:backlight/
>>
>>> +			linux,default-trigger = "backlight";
>>> +		};
>>> +
>>> +		led@1 {
>>> +			reg = <1>;
>>> +			led-sources = <1>;
>>> +			ti,led-mode = <0>;
>>> +			label = "platform::kbd_backlight";
>>
>> s/platform::kbd_backlight/:kbd_backlight/
> 
> Yes makes sense to me.
> 
>> and then send you a pull request.
>>
>> Would you be OK with that?
> 
> Sure go for it. Here's my ack for the changes:
> 
> Acked-by: Tony Lindgren <tony@atomide.com>
> 
> And then for the one liner to fold in below:
> 
> Signed-off-by: Tony Lindgren <tony@atomide.com>
> 
> 8< -------------
> diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
> +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> @@ -214,7 +214,6 @@
>   
>   		width-mm = <50>;
>   		height-mm = <89>;
> -		backlight = <&lcd_backlight>;
>   
>   		panel-timing {
>   			clock-frequency = <0>;		/* Calculated by dsi */
> 

Folded in, thanks. Beside that, I also removed lcd_backlight DT
labels from both DT bindings and dts, since it is now unused
and misleading.

-- 
Best regards,
Jacek Anaszewski