devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Amelie Delaunay <amelie.delaunay@foss.st.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: devicetree@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/5] ARM: dts: stm32: fullfill diversity with OPP for STM32M15x SOCs
Date: Tue, 27 May 2025 15:12:54 +0200	[thread overview]
Message-ID: <eec2a1db-717e-46f2-a988-6beefab7b699@kernel.org> (raw)
In-Reply-To: <20250527-stm32mp157f-dk2-v1-1-8aef885a4928@foss.st.com>

On 27/05/2025 15:03, Amelie Delaunay wrote:
> From: Alexandre Torgue <alexandre.torgue@foss.st.com>
> 
> This commit creates new files to manage security features and supported OPP
> on STM32MP15x SOCs. On STM32MP15xY, "Y" gives information:
>  -Y = A means no cryp IP and no secure boot + A7-CPU@650MHz.
>  -Y = C means cryp IP + optee + secure boot + A7-CPU@650MHz.
>  -Y = D means no cryp IP and no secure boot + A7-CPU@800MHz.
>  -Y = F means cryp IP + optee + secure boot + A7-CPU@800MHz.
> 
> It fullfills the initial STM32MP15x SoC diversity introduced by
> commit 0eda69b6c5f9 ("ARM: dts: stm32: Manage security diversity
> for STM32M15x SOCs").
> 
> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
> ---
>  arch/arm/boot/dts/st/stm32mp15xa.dtsi |  5 +++++
>  arch/arm/boot/dts/st/stm32mp15xc.dtsi |  4 +++-
>  arch/arm/boot/dts/st/stm32mp15xd.dtsi |  5 +++++
>  arch/arm/boot/dts/st/stm32mp15xf.dtsi | 20 ++++++++++++++++++++
>  4 files changed, 33 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp15xa.dtsi b/arch/arm/boot/dts/st/stm32mp15xa.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..cb55f5966f74011d12d7a5c6ad047569d25d4e98
> --- /dev/null
> +++ b/arch/arm/boot/dts/st/stm32mp15xa.dtsi
> @@ -0,0 +1,5 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
> + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.

You create entirely empty, unused file. There is literally no benefit of
this file, no impact, just more files to handle.

> + */
> diff --git a/arch/arm/boot/dts/st/stm32mp15xc.dtsi b/arch/arm/boot/dts/st/stm32mp15xc.dtsi
> index 97465717f932fc223647af76e88a6182cf3c870f..4d30a2a537f15c1e145635b090de0f0222526579 100644
> --- a/arch/arm/boot/dts/st/stm32mp15xc.dtsi
> +++ b/arch/arm/boot/dts/st/stm32mp15xc.dtsi
> @@ -1,9 +1,11 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)

License change is not explained in commit msg and anyway should be
separate commit with acks/sobs from all copyright holders. You also need
to CC them (Cc e.g. Gatien).

>  /*
>   * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
>   * Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
>   */
>  
> +#include "stm32mp15xa.dtsi"
> +
>  &etzpc {
>  	cryp1: cryp@54001000 {
>  		compatible = "st,stm32mp1-cryp";
> diff --git a/arch/arm/boot/dts/st/stm32mp15xd.dtsi b/arch/arm/boot/dts/st/stm32mp15xd.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..cb55f5966f74011d12d7a5c6ad047569d25d4e98
> --- /dev/null
> +++ b/arch/arm/boot/dts/st/stm32mp15xd.dtsi
> @@ -0,0 +1,5 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
> + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
> + */

Same problems.

> diff --git a/arch/arm/boot/dts/st/stm32mp15xf.dtsi b/arch/arm/boot/dts/st/stm32mp15xf.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..5f6a2952125d00d468e2e4012024f02380cfaa49
> --- /dev/null
> +++ b/arch/arm/boot/dts/st/stm32mp15xf.dtsi
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
> +/*
> + * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
> + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
> + */
> +
> +#include "stm32mp15xd.dtsi"
> +
> +/ {
> +	soc {
> +		cryp1: cryp@54001000 {
> +			compatible = "st,stm32mp1-cryp";
> +			reg = <0x54001000 0x400>;
> +			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&rcc CRYP1>;
> +			resets = <&rcc CRYP1_R>;
> +			status = "disabled";
> +		};
> +	};
> +};
> 


Best regards,
Krzysztof

  reply	other threads:[~2025-05-27 13:12 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-27 13:03 [PATCH 0/5] Introduce STM32MP157F-DK2 board Amelie Delaunay
2025-05-27 13:03 ` [PATCH 1/5] ARM: dts: stm32: fullfill diversity with OPP for STM32M15x SOCs Amelie Delaunay
2025-05-27 13:12   ` Krzysztof Kozlowski [this message]
2025-05-27 14:03     ` Amelie Delaunay
2025-05-27 14:08       ` Krzysztof Kozlowski
2025-05-27 13:03 ` [PATCH 2/5] ARM: dts: stm32: use 'typec' generic name for stusb1600 on stm32mp15xx-dkx Amelie Delaunay
2025-05-27 13:03 ` [PATCH 3/5] dt-bindings: regulator: Add STM32MP15 SCMI regulator identifiers Amelie Delaunay
2025-05-27 13:03 ` [PATCH 4/5] dt-bindings: arm: stm32: add STM32MP157F-DK2 board compatible Amelie Delaunay
2025-05-27 13:09   ` Krzysztof Kozlowski
2025-05-27 13:17     ` Amelie Delaunay
2025-05-27 13:03 ` [PATCH 5/5] ARM: dts: stm32: add stm32mp157f-dk2 board support Amelie Delaunay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=eec2a1db-717e-46f2-a988-6beefab7b699@kernel.org \
    --to=krzk@kernel.org \
    --cc=alexandre.torgue@foss.st.com \
    --cc=amelie.delaunay@foss.st.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).