Re: [PATCH v2 4/4] arm64: dts: qcom: sm8550-qrd: enable PMIC Volume and Power buttons

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 31.05.2023 14:22, Neil Armstrong wrote:
> The Volume Down & Power buttons are controlled by the PMIC via
> the PON hardware, and the Volume Up is connected to a PMIC gpio.
> 
> Enable the necessary hardware and setup the GPIO state for the
> Volume Up gpio key.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 36 +++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
> index efff15225e67..24fc368de97b 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
> @@ -54,6 +54,22 @@ chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
>  
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&volume_up_n>;
property-n
property-names

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> +
> +		key-volume-up {
> +			label = "Volume Up";
> +			linux,code = <KEY_VOLUMEUP>;
> +			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <15>;
> +			linux,can-disable;
> +			wakeup-source;
> +		};
> +	};
> +
>  	pmic-glink {
>  		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
>  		#address-cells = <1>;
> @@ -516,6 +532,16 @@ led-1 {
>  	};
>  };
>  
> +&pm8550_gpios {
> +	volume_up_n: volume-up-n-state {
> +		pins = "gpio6";
> +		function = "normal";
> +		power-source = <1>;
> +		bias-pull-up;
> +		input-enable;
> +	};
> +};
> +
>  &pm8550_pwm {
>  	status = "okay";
>  
> @@ -548,6 +574,16 @@ &pm8550b_eusb2_repeater {
>  	vdd3-supply = <&vreg_l5b_3p1>;
>  };
>  
> +&pon_pwrkey {
> +	status = "okay";
> +};
> +
> +&pon_resin {
> +	linux,code = <KEY_VOLUMEDOWN>;
> +
> +	status = "okay";
> +};
> +
>  &pcie_1_phy_aux_clk {
>  	clock-frequency = <1000>;
>  };
>