Re: [PATCH 1/4] dt-binding: irq: imx-irqsteer: use irq number per channel instead of group number

[Marc Zyngier <marc.zyngier@arm.com>]

On 18/01/2019 09:46, Aisheng Dong wrote:
>> From: Marc Zyngier [mailto:marc.zyngier@arm.com]
>> Sent: Friday, January 18, 2019 5:39 PM
>> On 18/01/2019 08:48, Lucas Stach wrote:
>>> Am Freitag, den 18.01.2019, 07:53 +0000 schrieb Aisheng Dong:
>>>> Not all 64 interrupts may be used in one group. e.g. most irqsteer in
>>>> imx8qxp and imx8qm subsystems supports only 32 interrupts.
>>>>
>>>> As the IP integration parameters are Channel number and interrupts
>>>> number, let's use fsl,irqs-per-chan to represents how many interrupts
>>>> supported by this irqsteer channel.
>>>
>>> Sorry, but total NACK. I've got to great lengths with dumping the
>>> actually implemented register layout on i.MX8M and AFAICS the IRQs are
>>> always managed in groups of 64 IRQs, even if less than that are
>>> connected as input IRQs. This is what the actually present register
>>> set on i.MX8M tells us.
>>
>> Also, I'd really like the DT bindings not to change at every release. So whatever
>> change (if any) has to be done for this driver to support existing HW, please
>> make sure that the DT bindings are kept as stable as possible.
>>
> 
> Sorry I should clarify it a bit.
> There's still no users in Devicetree.
> So I guess we can update it, right? Or not?

What do you mean by no users? This driver is in 5.0, and I assume people
are using it one way or another. Not having a platform in the kernel
tree is pretty much irrelevant, as the kernel tree is not a canonical
repository of existing platforms.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...